Teknetics T2LTD-BLK Special Edition Metal Detector User Manual

소개

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Teknetics T2LTD-BLK Special Edition Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Teknetics T2LTD-BLK is designed for advanced metal detection, offering exceptional depth and speed for coin shooting and relic hunting. It features dual DD search coils (5-inch and 11-inch) and trigger-actuated pinpointing for precise target location.

중요한 안전 정보

• Always exercise caution when digging to avoid underground utilities or hazardous objects.
• 천둥번개나 악천후 시에는 탐지기를 작동하지 마십시오.
• Keep the control housing dry. The search coils are waterproof, but the control housing is not.
• 권장 배터리만 사용하십시오.
• This device is heavy and may cause strain or injury if not handled properly. Maintain proper posture and take breaks during extended use.

제품 구성 요소

Your Teknetics T2LTD-BLK package includes the following main components:

• Control Housing with Display
• 윗줄기
• 하부 스템
• 팔걸이
• 11-inch DD Waterproof Search Coil
• 5-inch DD Waterproof Search Coil
• Coil Mounting Bolt and Washers

Image: Teknetics T2LTD-BLK Metal Detector with both 5-inch and 11-inch DD coils. This image shows the complete metal detector assembly, including the control unit, shaft, armrest, and both the larger 11-inch DD search coil and the smaller 5-inch DD search coil.

설정 및 조립

1. 검색 코일을 부착하세요:

   Secure the desired search coil (11-inch or 5-inch DD) to the lower stem using the provided non-metallic bolt and washers. Ensure it is snug but do not overtighten.

2. Assemble the Stems:

   Insert the lower stem into the upper stem. Adjust the length to a comfortable position for your height, ensuring the search coil is parallel to the ground when held naturally.

3. 컨트롤 하우징을 장착하십시오:

   Slide the control housing onto the upper stem. The armrest should be positioned to support your forearm comfortably.
4. 코일 케이블을 연결하세요:

   Wrap the search coil cable securely around the stem, leaving enough slack for coil movement. Plug the connector into the receptacle on the control housing. Ensure the connection is firm.

5. 배터리 설치:

   The T2LTD-BLK requires 4 AA batteries. Open the battery compartment on the control housing and insert the batteries, observing proper polarity. Close the compartment securely.

이미지: 클로즈업 view of the Teknetics T2LTD-BLK control panel. This image highlights the digital display, showing target ID, sensitivity, discrimination settings, and battery indicator. The control knob and menu button are also visible.

작동 지침

전원 켜기/끄기

To power on the detector, press and hold the MENU button. To power off, press and hold the MENU button again until the display turns off.

기본 작동 모드

• 전체 금속 모드: Detects all types of metal. Ideal for finding deeply buried targets or when the target material is unknown.
• 차별 모드: Allows the user to filter out unwanted metals (e.g., iron) and focus on specific target types.

주요 설정

• 감광도: Adjusts the detector's ability to detect targets. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
• Discrimination Level: Sets the rejection level for unwanted metals. Higher levels reject more ferrous items.
• 그라운드 밸런스: Essential for stable operation in mineralized soil. The T2LTD-BLK features manual ground balance. Refer to the detailed manual for specific ground balancing procedures.
• 톤 수: Selects the audio tone response for different target IDs.

Trigger-Actuated Pinpointing

To pinpoint a target, center the search coil over the detected object. Pull and hold the trigger located under the control housing. Slowly move the coil in a cross-pattern over the target. The audio tone will peak, and the target ID will stabilize when the coil is directly over the center of the object.

유지 보수 및 관리

• 청소: Wipe down the detector with a damp 사용 후에는 천으로 닦아주세요. 연마성 세제나 용제를 사용하지 마세요.
• 저장: Store the detector in a dry, cool place. Remove batteries if storing for extended periods to prevent leakage.
• 코일 관리: The search coils are waterproof and can be rinsed with fresh water. Ensure the coil cable connection to the control housing remains dry.
• 배터리 교체: 디스플레이에 배터리 부족 표시가 나타나면 배터리를 교체하세요.

문제 해결

명세서

보증 정보

Teknetics products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Teknetics web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원

For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Teknetics customer support. You can find contact information on the official Teknetics web사이트 또는 공인 딜러를 통해 구매하세요.

Official Teknetics Web대지: Teknetics Store on Amazon