1. 중요 안전 지침
Read and understand all instructions before using this trolley jack. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.
- 용량: Do not exceed the rated capacity of 2.25 tonnes (2250 kg).
- 안정적인 표면: Always use the jack on a hard, level, and stable surface.
- 지원하다: After lifting, always support the vehicle with appropriate jack stands before working underneath. Never rely solely on the jack for support.
- Centering Load: Ensure the load is centered on the saddle and the jack is positioned correctly under the vehicle's lifting points.
- 움직임: Do not move the vehicle while it is on the jack.
- 유지: Regularly inspect the jack for damage or wear. Do not use if damaged.
- 인원: Keep hands and feet clear of moving parts. Ensure no one is in the vehicle during lifting or lowering.
2. 제품 오버view
The Sealey 1025HL is a 2.25-tonne high lift trolley jack designed for lifting vehicles with high ground clearance, such as 4x4s, cars, and light commercial vehicles. It features a Super Rocket Lift system for rapid lifting.
그림 1: Sealey 1025HL 2.25tonne High Lift Trolley Jack. This image displays the complete red trolley jack with its handle, saddle, and wheels. The jack is designed for vehicle lifting and features a robust chassis.
주요 구성 요소:
- 안장: 차량을 들어올리는 접촉점.
- 드는 팔: Raises and lowers the saddle.
- 핸들: Used for pumping the jack and controlling the release valve.
- 릴리스 밸브: Controls the lowering speed of the jack.
- 바퀴: 잭을 조작하기 위해서입니다.
- 섀시 : The main frame of the jack.
3. 설정 및 준비
- 짐 풀기: Carefully remove the jack from its packaging. Inspect for any signs of damage during transit.
- 핸들 어셈블리: Insert the handle into the handle socket. Secure it according to the instructions provided with the jack (typically involves aligning a pin or tightening a screw).
- 공기 빼기(배출): Before first use, or if the jack has been stored for a long period, it may be necessary to purge air from the hydraulic system.
- 릴리스 밸브를 시계 반대 방향으로 돌려 완전히 여십시오.
- Pump the handle several times to expel any air.
- 해제 밸브를 시계 방향으로 돌려 닫습니다.
- 사용 전 확인: Ensure all bolts and fittings are tight. Check for any hydraulic fluid leaks.
4. 사용 설명서
4.1. 차량 들어올리기
- 준비:
- Park the vehicle on a firm, level surface.
- Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual).
- 지면에 남아 있을 바퀴에 바퀴 고임목을 놓으십시오.
- 잭 위치 조정: Locate the vehicle manufacturer's recommended lifting points. Position the jack so the saddle is directly under the lifting point. Ensure the jack is stable and not on an incline.
- Closing the Release Valve: Turn the handle clockwise until the release valve is fully closed. Do not overtighten.
- 리프팅: Pump the handle up and down to raise the saddle. The Super Rocket Lift feature will quickly bring the saddle into contact with the lifting point. Continue pumping until the vehicle is raised to the desired height.
- 잭 스탠드를 사용하여 고정하십시오: Immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by gently turning the release valve counter-clockwise. Ensure the vehicle is securely resting on the jack stands before performing any work.
4.2. 차량 높이 낮추기
- Raise Slightly: If the vehicle is on jack stands, pump the jack handle a few times to lift the vehicle slightly off the jack stands.
- 잭 스탠드를 제거하세요: 차량 아래에서 잭 스탠드를 조심스럽게 제거하십시오.
- 저하: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
- 완전 하강: Continue to lower the vehicle until it is fully on the ground. Remove the jack from under the vehicle.
5. 유지관리
- 매끄럽게 하기: 모든 움직이는 부품에 주기적으로 가벼운 기계유를 사용하여 윤활하십시오.
- 유압유: Check the hydraulic fluid level regularly. If low, top up with a high-quality hydraulic jack oil. Do not use brake fluid or other fluids.
- 청소: 잭을 깨끗하게 유지하고 먼지, 기름, 부식성 물질이 묻지 않도록 하십시오.
- 저장: Store the jack in a dry, clean area with the ram fully retracted.
- 점검: Before each use, inspect the jack for any signs of damage, wear, or leaks. If any issues are found, do not use the jack and consult a qualified service technician.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 잭은 물건을 들지 않거나 아주 천천히 든다. |
|
|
| 잭은 하중을 받으면 내려갑니다. |
|
|
| 잭은 완전히 내려오지 않습니다. |
|
|
7. 사양
| 모델 번호 | 1025HL |
| 상표 | 실리 |
| 하중 용량 | 2.25 tonnes (2250 kg) |
| 최소 안장 높이 | 150mm (XNUMXmm) |
| 최대 안장 높이 | 535mm (XNUMXmm) |
| 제품 크기(L x W x H) | 75 x 28 x 18cm |
| 품목 무게 | 0.5kg |
| 특별 기능 | Super Rocket Lift, Strong double rolled chassis |
Note: The listed item weight of 0.5 kg appears to be a data anomaly for a 2.25-tonne trolley jack. Please refer to the product packaging or manufacturer's official documentation for precise weight information.
8. 보증 및 지원
For warranty information, technical support, or to order replacement parts, please refer to the documentation included with your product or contact Sealey customer service directly. Keep your purchase receipt as proof of purchase.
제조사: 씰리
