3M 후킷 오비탈 에어 File 신발 05746 사용 설명서

1. 제품 오버view

The 3M Hookit Orbital Air File Shoe, model 05746, is an accessory designed for use with compatible orbital air file sanders. It facilitates the attachment of Hookit abrasives, enhancing sanding efficiency across various applications. This product is intended for industrial and occupational use only.

주요 특징:

• Integrates time-saving features into air file 샌더스.
• Sized for a range of orbital air file sanders equipped with dust evacuation systems.
• Features a hole pattern to assist in evacuating dust from the abrasive sheet surface, contributing to extended abrasive life.
• Utilizes the Hookit attachment system for rapid and straightforward abrasive sheet changes.

This image displays the 3M Hookit Orbital Air File Shoe, model 05746, showcasing its overall design and dimensions. The shoe is a rectangular plate, typically metallic, with a textured surface for abrasive attachment.

2. 설정 및 설치

Proper installation of the 3M Hookit Orbital Air File Shoe is crucial for optimal performance and safety.

1. Prepare the Air File 샌더: Ensure your orbital air file sander is disconnected from its air supply before beginning installation.
2. Remove Existing Shoe (if applicable): If an old shoe is present, carefully remove it according to your sander's manufacturer instructions.
3. Attach the Hookit Shoe: Align the mounting holes on the 3M Hookit Orbital Air File Shoe with the corresponding holes on your air file sander. Secure the shoe using the appropriate fasteners (screws, bolts, etc.) provided with your sander or the shoe itself. Ensure all fasteners are tightened securely to prevent movement during operation.
4. Verify Dust Evacuation Alignment: Confirm that the hole pattern on the Hookit shoe aligns with the dust evacuation system of your sander to ensure efficient dust removal.
5. Attach Abrasive: Press a compatible 3M Hookit abrasive sheet firmly onto the textured surface of the shoe. The Hookit system allows for quick and secure attachment.

This image shows the reverse side of the 3M Hookit Orbital Air File Shoe, model 05746, highlighting the pre-drilled holes for secure attachment to an orbital air file sander. The '3M 05746' branding is visible.

3. 사용 설명서

Once the 3M Hookit Orbital Air File Shoe is securely installed and an abrasive sheet is attached, you can proceed with sanding operations.

1. 공기 공급 연결: Reconnect your air file sander to its air supply.
2. 개인 보호 장비(PPE)를 착용하세요: Always wear appropriate PPE, including eye protection, hearing protection, and a dust mask, when operating power tools.
3. 샌더 시작: 에어컨을 켜다 file 샌더.
4. 가공물에 적용: Gently place the abrasive surface of the shoe onto the workpiece. Apply even, moderate pressure and move the sander in a consistent pattern to achieve desired results.
5. Monitor Dust Evacuation: Ensure the dust evacuation system is functioning effectively to maintain a clean work surface and prolong abrasive life.
6. Change Abrasives: When an abrasive sheet wears out, simply peel it off the Hookit shoe and press a new one into place.

4. 유지관리

Regular maintenance helps ensure the longevity and performance of your 3M Hookit Orbital Air File Shoe.

• 청소: After each use, wipe down the shoe to remove any accumulated dust or debris. A soft brush or compressed air can be used to clear dust from the Hookit surface and dust evacuation holes.
• Inspect Hookit Surface: Periodically inspect the Hookit attachment surface for wear or damage. A worn Hookit surface may not securely hold abrasive sheets.
• 패스너 확인: Ensure all mounting fasteners remain tight. Retighten if necessary.
• 저장: Store the shoe in a clean, dry environment when not in use.

5. 문제 해결

This section addresses common issues that may arise during the use of the 3M Hookit Orbital Air File Shoe.

• Abrasive Sheet Not Adhering:
  가능한 원인: The Hookit surface may be dirty or worn.
  해결책: Clean the Hookit surface with a brush or compressed air. If the surface is visibly worn or damaged, the shoe may need replacement.
• Ineffective Dust Evacuation:
  가능한 원인: Dust holes are clogged or misaligned.
  해결책: Ensure the dust holes on the abrasive sheet and the shoe are clear and align correctly with the sander's dust collection system. Clean any blockages.
• Excessive Vibration or Poor Finish:
  가능한 원인: The shoe is not securely attached to the sander.
  해결책: Disconnect the air supply and check all mounting fasteners. Tighten them securely. Ensure the abrasive sheet is properly centered and flat on the shoe.

6. 사양

7. 안전 정보

경고: 산업/직업용으로만 사용하십시오. 소비자 판매 또는 사용을 금지합니다.

3M 산업 및 직업용 제품은 숙련된 산업 및 직업 분야 종사자가 작업장에서 사용할 수 있도록 제조, 표시 및 포장되었습니다. 이러한 제품은 일반 소비자(예: 가정, 개인, 초등학교 또는 중학교, 레크리에이션/스포츠 또는 해당 제품 포장이나 설명서에 명시되지 않은 기타 용도)가 판매하거나 사용하도록 제조, 표시 또는 포장되지 않았습니다.

사용자는 해당 보건 및 안전 규정 및 표준(예: 미국 산업안전보건청, 미국 표준협회)은 물론 모든 제품 설명서, 사용 지침, 경고 및 기타 제한 사항을 준수하여 이 제품을 선택하고 사용해야 합니다. 사용자는 리콜, 현장 조치 또는 기타 제품 사용 관련 공지에 따라 필요한 모든 조치를 취해야 합니다.

3M 산업 및 직업용 제품을 오용할 경우 부상, 질병, 사망 또는 재산 피해가 발생할 수 있습니다.

제품 선택 및 사용에 대한 도움이 필요하시면 현장 안전 전문가, 산업 위생 전문가 또는 기타 관련 분야 전문가에게 문의하십시오. 추가 제품 정보는 다음 웹사이트를 방문하십시오. www.3M.com.

8. 지원

For technical assistance, product inquiries, or further information regarding the 3M Hookit Orbital Air File Shoe 05746, please contact 3M customer support or visit the official 3M web대지.

Specific warranty information for this product is not provided in this manual. Please refer to 3M's official warranty policies or contact their customer service for details.