소개
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
안전 정보
- Always operate the device in a safe manner.
- 장치를 극한의 온도나 습기에 노출시키지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 배터리는 현지 규정에 따라 올바르게 폐기하세요.
- 기기를 직접 개조하거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
패키지 내용
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- 보관 케이스
- 사용 설명서 (본 문서)
Note: A 9V battery is required for operation and is sold separately.
설정: 배터리 설치
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Locate the battery compartment cover, typically on the handle or rear of the device.
- 덮개를 밀거나 풀어서 수납 공간을 엽니다.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- 배터리함 덮개를 단단히 다시 닫으십시오.
- 이제 장치를 사용할 준비가 되었습니다.
작동 지침
전원 켜기/끄기
- 감지기를 켜려면 ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- 감지기를 켜려면 끄다, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
민감도 감소
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
배터리 부족 경고
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
특징
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- 배터리 부족 경고.
- Comes with a handy carrying case.
유지
- 청소: 탐지기를 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 저장: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- 배터리: 장기간 기기를 사용하지 않을 경우 누액 및 손상을 방지하기 위해 배터리를 분리하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 감지기가 켜지지 않습니다. | 배터리가 소진되었거나 잘못 설치되었습니다. | Check battery polarity. Replace with a fresh 9V battery. |
| 탐지 능력이 약하거나 일관성이 없습니다. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | 배터리 문제. 내부 고장. | Check/replace battery. If problem persists, contact customer support. |
명세서
| 상표 | 센테크 |
| 모델 번호 | 94138 |
| 전원 | 9V 배터리(별도 구매) |
| 감지 유형 | 금속 |
| 지팡이 크기 | 6인치 |
| 알림 | Audio Alarm, LED Visual Alert, Low Battery Alert |
| 특별 기능 | 50% Sensitivity Reduction Button |
| 치수 | 16.5 x 5 x 2 인치 |
| 품목 무게 | 1.45파운드 |
| 재료 | Wood, Metal (referring to detected materials) |
| 국제 보호 등급 | IP54 |
보증 및 지원
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.
