1. 제품 오버view
The Nice Mindy TT1N is a control logic unit designed for the precise control of 230V motors used in applications such as blinds and roller shutters. This unit features an integrated radio receiver, simplifying installation and programming, and offers compatibility with various Nice remote controls and external sensors.
주요 특징:
- Controls motors up to 500 W.
- Stores up to 30 stations (remote controls).
- Adjustable operating time from 4 seconds to 4 minutes.
- 컴팩트한 크기: 98 x 26 x 20mm.
- 이탈리아에서 제조되었습니다.
Figure 1: Nice Mindy TT1N Control Logic Unit. This image shows the compact white control unit with two white cables extending from one end. The unit has clear labeling for electrical connections and product specifications, including "Nice TT1N", "230V 50Hz", "Imax = 2,2A", "Pmax = 500W/400VA", and "IP55". A wiring diagram is also visible on the unit's surface.
2. 설정 및 설치
The Nice Mindy TT1N is designed for simple installation and programming. Ensure all power is disconnected before proceeding with any wiring.
2.1. 배선도
Refer to the diagram printed on the unit for correct electrical connections. The unit is designed for 230V 50Hz power supply.
그림 2: 상세 view of the Nice Mindy TT1N wiring diagram. The diagram shows terminals for motor connection (M, COM, Ground) and power supply (L, N). Numbered terminals (1-7) are also visible, indicating connections for control inputs and accessories. This diagram is crucial for proper installation.
- L(라인) 그리고 N(중립): Connect to the 230V AC power supply.
- M (Motor) 그리고 COM(공통): Connect to the motor's power input.
- 접지 기호: Connect to the electrical ground.
- 터미널 1-7: These terminals are used for various control inputs and accessories, such as remote control programming and external sensor connections. Consult the full product manual for specific functions of each terminal.
2.2. 원격 제어 프로그래밍
The unit features an integrated 433 MHz radio receiver. It is compatible with Nice Way, Nice Ergo, Nice Plano, and Nice Flor-S remote controls. Refer to your remote control's manual for specific pairing instructions. Generally, programming involves pressing a button on the control unit and then a button on the remote control to establish communication.
2.3. Sensor Association
The TT1N can be associated with external sun, wind, and rain sensors (not supplied). These sensors allow for automated operation of the motor based on environmental conditions. Consult the sensor's manual and the TT1N's detailed programming guide for integration steps.
3. 사용 설명서
Once installed and programmed, the Nice Mindy TT1N allows for convenient control of your motor.
3.1. 기본 동작
Use your paired Nice remote control to operate the connected motor. Typically, there are buttons for 'Up', 'Down', and 'Stop'.
- 를 누르세요 'Up' button to raise the blind/shutter.
- 를 누르세요 'Down' button to lower the blind/shutter.
- 를 누르세요 '멈추다' button to halt movement at any point.
3.2. Automatic Operation (with Sensors)
If external sensors are connected and configured, the system can operate automatically:
- Sun Sensor: May automatically lower blinds/shutters when intense sunlight is detected.
- 바람 센서: May automatically raise blinds/shutters to protect them during high winds.
- 레인 센서: May automatically close windows or retract awnings during rain.
4. 유지관리
The Nice Mindy TT1N is designed for long-term reliability and requires minimal maintenance.
- 청소: 부드럽고 마른 천으로 기기 외부를 주기적으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 점검: Annually inspect wiring connections to ensure they are secure and free from damage.
- 환경 보호: Ensure the unit remains within its specified IP55 rating environment, protected from excessive dust and water jets.
5. 문제 해결
If you encounter issues with your Nice Mindy TT1N, consider the following common solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모터가 리모컨에 반응하지 않습니다. | Remote control not paired or battery low. Power supply issue. | Re-pair the remote control. Check remote battery. Verify power to the TT1N unit. |
| 모터가 예기치 않게 멈춥니다. | Overload protection activated. Sensor input. | Check motor for obstructions. Verify sensor readings (e.g., high wind). Allow unit to cool if overloaded. |
| 장치의 전원이 켜지지 않습니다. | No power supply. Incorrect wiring. | Check main power supply. Inspect L and N connections. |
문제가 지속될 경우 자격을 갖춘 기술 지원 담당자에게 문의하십시오.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 멋진 |
| 모델 | TT1N |
| 전원 공급 장치 | 230V 50Hz |
| Max Current (Imax) | 2.2A |
| 최대 출력(Pmax) | 500W / 400VA |
| 보호 등급 | IP55 |
| 치수(길이 x 너비 x 높이) | 98 x 26 x 20 mm (approx. from package dimensions) |
| 고주파 | 433MHz |
| Remote Control Memory | 최대 30개 스테이션 |
| Operating Time Programming | 4 seconds minimum to 4 minutes maximum |
7. 보증 및 지원
For warranty information, please refer to the documentation provided with your purchase or contact your local Nice distributor. Technical support can be obtained through the official Nice web현장이나 공인 서비스 센터로 문의하세요.
추가 지원이 필요하면 다음을 방문하세요. Nice official web대지.