HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM Memory Module User Manual

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM Memory Module (P/N: 500205-571). This memory module is designed for use in compatible server systems to enhance performance and reliability. Please read this manual thoroughly before installation and retain it for future reference.

2. 안전 정보

Always observe the following safety precautions to prevent damage to the memory module, the host system, and to ensure personal safety:

• 정전기 방전(ESD) 보호: Memory modules are sensitive to static electricity. Always wear an anti-static wrist strap or frequently touch a grounded metal object before handling the module.
• 전원 끄기 : Ensure the host system is completely powered off and disconnected from the power source before installing or removing the memory module.
• 조심스럽게 다루십시오: Hold the memory module by its edges. Avoid touching the gold connector pins or the integrated circuits (ICs) on the module.
• 호환성: Verify that your server system supports DDR3 ECC Registered DIMMs and the specified capacity and speed before installation.

3. 제품 오버view

The HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM is a high-performance memory solution designed for server environments. It features Error-Correcting Code (ECC) for data integrity and is a Registered (Buffered) module, which enhances stability in systems with a large number of memory modules. This module operates at a speed of 1333MHz (PC3-10600) and has a 240-pin form factor.

그림 1: HEWLETT-PACKARD 8GB DDR3 ECC Registered DIMM Memory Module. This image shows the general appearance of the memory module, highlighting its form factor and integrated circuits.

4. 설정 및 설치

Follow these steps carefully to install the memory module into your compatible server system:

1. 시스템 준비:
   • Shut down the server completely.
   • Disconnect the power cord and any other cables connected to the server.
   • 제조업체의 지침에 따라 서버 섀시를 여십시오.
   • Wear an anti-static wrist strap and connect it to a grounded metal part of the server chassis.
2. DIMM 슬롯 찾기: Identify the available DIMM slots on the server motherboard. Consult your server's documentation for the correct slot population order, especially if installing multiple modules.
3. 고정 클립을 엽니다. DIMM 슬롯 양쪽 끝에 있는 고정 클립을 바깥쪽으로 살짝 밀어 열어주세요.
4. 메모리 모듈 삽입: Align the memory module with the DIMM slot, ensuring the notch on the module matches the key in the slot. This prevents incorrect insertion.
5. Seat the Module: Apply even pressure to both ends of the memory module until it clicks into place and the retention clips automatically snap shut. Do not force the module; if it does not seat easily, recheck alignment.
6. 설치 확인: Visually inspect the module to ensure it is fully seated and the retention clips are securely closed.
7. 닫기 및 전원 켜기: Close the server chassis, reconnect all cables, and power on the system. The system BIOS should automatically detect the new memory.

5. 운영

Once installed, the HEWLETT-PACKARD 8GB DDR3 1333MHZ PC3-10600 ECC Registered DIMM operates automatically within a compatible server system. No specific user interaction is typically required for its operation. The server's BIOS and operating system will manage the memory resources. Ensure your server's BIOS is updated to the latest version to ensure optimal compatibility and performance with new memory modules.

6. 유지관리

Memory modules generally require minimal maintenance. Follow these guidelines for optimal longevity:

• 청결: Keep the server environment clean and dust-free. Dust accumulation can impede airflow and lead to overheating.
• 손질: When handling the module, always use ESD precautions and hold it by the edges.
• 저장: If storing the module, keep it in an anti-static bag in a cool, dry place away from direct sunlight and extreme temperatures.
• 점검: Periodically inspect the module and its slot for any signs of damage or corrosion, especially during other system maintenance.

7. 문제 해결

메모리 모듈 설치 후 문제가 발생하면 다음 문제 해결 단계를 고려하십시오.

• 시스템이 부팅되지 않음/화면이 표시되지 않음:
  • Ensure the memory module is fully seated in its slot and the retention clips are closed.
  • Verify that the module is installed in the correct slot according to your server's motherboard manual.
  • 모듈을 다시 장착해보세요.
  • 여러 개의 모듈이 설치된 경우, 잠재적으로 결함이 있는 모듈을 식별하기 위해 한 번에 하나의 모듈로만 부팅해보세요.
• 잘못된 메모리가 감지되었습니다.
  • Check the server's BIOS/UEFI settings to confirm the detected memory amount.
  • Ensure your server's motherboard and CPU support the total amount of RAM installed.
  • Update the server's BIOS/UEFI to the latest version, as this often improves memory compatibility.
• 시스템 불안정/충돌:
  • Run a memory diagnostic tool (e.g., MemTest86) to check for errors.
  • Ensure the server's cooling system is functioning correctly to prevent overheating.

If problems persist, consult your server's documentation or contact HEWLETT-PACKARD technical support.

8. 사양

9. 보증 및 지원

This HEWLETT-PACKARD memory module is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official HEWLETT-PACKARD website. For technical assistance, troubleshooting, or warranty claims, please contact HEWLETT-PACKARD customer support through their official channels.

HEWLETT-PACKARD Official Web대지: 홈페이지