1. 서론
This manual provides essential information for the proper installation, use, and maintenance of the RACO Work Cover. Please read these instructions carefully before proceeding with installation to ensure safe and effective operation.
2. 제품 오버view
The RACO Work Cover is a durable, square exposed work cover designed for mounting electrical receptacles and switches onto electrical boxes. It is constructed from 16-gauge galvanized steel, ensuring robust performance and longevity in various electrical installations.
그림 2.1: 전면 view of the RACO Work Cover.
그림 2.2: 뒤로 view of the RACO Work Cover, indicating internal volume and branding.
주요 특징:
- 내구성 있는 구조: Manufactured from 16-gauge galvanized steel for enhanced durability and protection.
- 간편한 설치: Features threaded tabs that wedge against the cover for a tight connection without requiring a separate nut.
- NEC Compliance: Meets the requirements of the 2014 NEC Article 250.146(A), allowing for bonding without the use of bonding jumpers for covers with crushed corners.
- Complete Hardware: Includes all necessary hardware for mounting receptacles.
- cULus 인증 기업: 안전 및 품질 기준 인증을 받았습니다.
3. 사양
| 기인하다 | 값 |
|---|---|
| 모델명 | HUBBELL ELECTRICAL PROD 812C 4S |
| 부품 번호 | 812C |
| 재료 | 16-Gauge Galvanized Steel |
| 품목 치수(LxWxH) | 4 x 4 x 0.1 인치 |
| 품목 패키지 치수(LxWxH) | 4.06 x 4.06 x 0.63 인치 |
| 패키지 무게 | 0.15 킬로그램 |
| 포함된 구성 요소 | Square exposed work cover, mounting hardware |
| 제조업체 | 허벨 |
| 규정 준수 | cULus Listed, 2014 NEC Article 250.146(A) |
4. 설정 및 설치
The RACO Work Cover is designed for straightforward installation. Ensure all power to the electrical box is turned off at the circuit breaker before beginning any electrical work.
필요한 도구(포함되지 않음):
- (나사 고정에 적합한) 드라이버
- 권tag(전원이 꺼져 있는지 확인하기 위한) 테스터
설치 단계:
- 안전이 최우선입니다. Turn off the power to the electrical circuit at the main breaker or fuse box. Verify that the power is off using a voltag전자 테스터.
- 상자 준비: Ensure the electrical box is securely mounted and all wiring is properly terminated to the receptacle or switch you intend to install.
- Attach Device to Cover: Align the receptacle or switch with the opening on the RACO Work Cover. Use the provided mounting screws to secure the device to the cover. The cover's design with threaded tabs allows for a secure fit without additional nuts.
- Mount Cover to Box: Carefully position the assembled cover and device over the electrical box. Align the mounting holes on the cover with the screw holes on the electrical box.
- 덮개를 고정하십시오: Insert the remaining mounting screws through the cover and into the electrical box. Tighten the screws until the cover is firmly secured to the box. Do not overtighten.
- 복원력 : Once the cover is securely installed, turn the power back on at the circuit breaker.
Figure 4.1: Detail of the crushed corner design for improved installation.
Note: The RACO Work Cover meets NEC Article 250.146(A) requirements, meaning a bonding jumper is not required for covers featuring crushed corners, simplifying the installation process.
5. 제품 작동
The RACO Work Cover functions as a protective and mounting enclosure for electrical devices. Once installed, it provides a secure and compliant housing for your receptacles or switches, allowing them to be safely used. There are no operational controls on the cover itself; its function is passive protection and structural support.
6. 유지관리
The RACO Work Cover requires minimal maintenance due to its durable galvanized steel construction.
- 청소: Periodically wipe the surface of the cover with a dry or slightly damp 먼지와 오염물을 제거할 때는 천을 사용하십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
- 점검: Annually inspect the cover for any signs of damage, corrosion, or loose connections. Ensure all mounting screws remain tight. If any damage is observed, replace the cover immediately.
7. 문제 해결
Most issues related to the RACO Work Cover are installation-related. Refer to the installation section for proper procedures.
- 커버가 맞지 않습니다:
- Ensure you have the correct size and type of work cover for your electrical box and device. This model (812C) is a square exposed work cover.
- Check for any obstructions inside or around the electrical box that might prevent the cover from seating properly.
- 나사가 조여지지 않습니다:
- Verify that you are using the correct screws provided with the cover or appropriate replacement screws.
- Check the threads on the electrical box and the cover for damage.
- Cover Appears Loose After Installation:
- Ensure all mounting screws are tightened securely. Do not overtighten, as this can strip threads.
- Confirm the electrical box itself is firmly mounted to the wall or structure.
8. 보증 및 지원
보증 정보:
The RACO Work Cover comes with a 1년 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
고객 지원:
For technical assistance, warranty claims, or product inquiries, please visit the official RACO brand store or contact their customer service department.
RACO Brand Store: https://www.amazon.com/stores/Raco/page/07990413-0B37-4FD4-968A-448263D18BEA
