소개
This manual provides essential information for the safe installation, operation, and maintenance of your BELL LH100WH Halogen Lampholder. Please read these instructions thoroughly before installation and retain them for future reference. This product is designed for outdoor and commercial applications, offering durable construction and efficient lighting.
제품 끝view
The BELL LH100WH Halogen Lampholder is a robust lighting fixture constructed from commercial-quality die-cast metal with a premium white powder-coat finish. It is designed to accommodate a 100-watt halogen bulb (included), providing bright and efficient illumination. The lampholder is UL listed and 2008 NEC compliant, ensuring safety and adherence to electrical standards.
This image displays the BELL LH100WH Halogen Lampholder in white. The fixture features a conical housing for the halogen bulb, which is visible inside. An adjustable arm extends from the back of the lampholder, connecting to a threaded conduit fitting, indicating its design for outdoor or commercial installation. Wires are visible extending from the fitting.
중요한 안전 정보
WARNING: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installation or servicing.
- 조명기구에 대한 작업을 하기 전에는 항상 전원을 끊으세요.
- 모든 전기 연결이 안전한지 확인하고 해당 지역의 전기 규정을 준수하세요.
- This product must be installed by a qualified electrician or in accordance with applicable electrical codes.
- 최대 와트를 초과하지 마십시오tage rating of 100 watts for the bulb.
- Allow the fixture and bulb to cool completely before handling or replacing the bulb.
- Use only halogen bulbs as specified.
패키지 내용
- 1 x BELL LH100WH Halogen Lamp보유자
- 1 x 100-Watt Halogen Bulb
- Installation Hardware (if applicable, not explicitly listed but implied for mounting)
설치 지침
Follow these steps carefully to install your halogen lamp보유자:
- 설치 준비: Turn off power at the main circuit breaker or fuse box to the location where the lampholder will be installed. Verify power is off using a voltag전자 테스터.
- 고정장치 장착: l을 단단히 부착하십시오.ampholder's mounting arm to a suitable electrical box or surface using appropriate hardware (not always included, depending on installation type). Ensure the mounting is stable and can support the fixture's weight.
- 와이어 연결: l을 연결하세요ampholder's wires to the corresponding electrical supply wires. Typically, this involves connecting the black wire from the fixture to the black (hot) wire from the supply, the white wire from the fixture to the white (neutral) wire from the supply, and the green or bare copper wire from the fixture to the ground wire from the supply. Use UL-listed wire connectors and ensure all connections are tight and secure.
- 전구를 설치하십시오: Carefully screw the provided 100-watt halogen bulb into the lampholder socket. Do not overtighten. Avoid touching the glass of the halogen bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves if necessary.
- 조정 및 테스트: l을 조정하세요ampholder to the desired angle. Restore power at the circuit breaker. Test the lampholder to ensure it functions correctly.
작동 지침
The BELL LH100WH Halogen Lampholder operates by simply turning on the electrical circuit to which it is connected. Ensure the bulb is correctly installed and the power supply is active. The lampholder provides immediate illumination upon activation.
유지
- 청소: 주기적으로 l의 외부를 청소하십시오.ampholder with a soft, damp 천을 사용하십시오. 연마성 세제나 용제는 사용하지 마십시오. 청소하기 전에 전원이 꺼져 있는지 확인하십시오.
- 전구 교체: When the halogen bulb needs replacement, turn off the power to the fixture and allow it to cool completely. Unscrew the old bulb and carefully screw in a new 100-watt halogen bulb. Avoid touching the new bulb's glass with bare hands.
- 점검: 배선 및 장착 상태를 정기적으로 점검하여 마모, 손상 또는 느슨한 연결 부위가 있는지 확인하십시오. 문제가 발견되면 즉시 조치하십시오.
문제 해결
- 불이 켜지지 않습니다:
- Check if the power supply is active at the circuit breaker.
- Ensure the bulb is securely screwed into the socket and is not burnt out.
- 모든 전기 연결이 안전하고 올바른지 확인하세요.
- 빛 깜박임:
- Check for loose bulb connections or faulty bulb.
- Inspect wiring connections for looseness.
명세서
| 사양 | 세부 사항 |
|---|---|
| 상표 | 벨 |
| 모델 번호 | LHS100W |
| 재료 | 금속 |
| 색상 | 하얀색 |
| 왓tage | 100 와트 |
| 전구의 종류 | 할로겐 |
| 사양 충족 | UL, 2008 NEC Compliant |
| 품목 무게 | 6.4 온스 |
| 제품 치수 | 7 x 4 x 4 인치 |
| 한국어: | 092326111133 |
보증 정보
This BELL product is manufactured to high-quality standards and is backed by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact BELL customer support. Keep your proof of purchase for warranty claims.
고객 지원
If you have any questions, require technical assistance, or need to report an issue with your BELL LH100WH Halogen Lampholder, please contact BELL customer support. Refer to the BELL web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.
