Proel DM220 다이내믹 마이크 사용 설명서

1. 소개 및 이상view

Thank you for choosing the Proel DM220 Dynamic Microphone. This manual provides essential information for the proper setup, operation, and maintenance of your microphone. The DM220 is a vocal microphone featuring a dynamic capsule and a cardioid polar pattern, designed for clear and extended frequency response, particularly transparent in low-mid frequencies. Its ergonomic barrel design ensures comfortable handling.

Image 1.1: The Proel DM220 Dynamic Microphone, shown with its included carrying pouch and microphone clip.

2. 주요 특징

• 변환기 유형: 무빙코일 다이내믹
• 극성 패턴: Cardioid, designed to pick up sound primarily from the front.
• 주파수 응답: 50 Hz - 15 kHz, providing a flat and extended range.
• 감광도: -53dB ± 3dB
• Maximum SPL for 0.5% THD: 135데시벨
• 신호 대 잡음비 : 74데시벨
• 공칭 임피던스: < 600옴
• 권장 부하 임피던스: 1500옴
• 커넥터: 3-pin male XLR for reliable audio connection.
• 켜기/끄기 스위치: Integrated switch for convenient control.
• 인체공학적 디자인: Solid feel and comfortable handling.

3. 설정 지침

3.1 마이크 연결

1. Locate the 3-pin male XLR connector at the base of the microphone.
2. Connect a standard XLR cable (not included) to the microphone's connector. Ensure a secure fit.
3. Connect the other end of the XLR cable to an appropriate input on your mixer, audio interface, or amp리퍼.

Image 3.1: The base of the Proel DM220 microphone, illustrating the 3-pin male XLR connection port.

3.2 마이크 장착

1. Attach the included microphone clip to a standard microphone stand (not included).
2. Gently insert the Proel DM220 microphone into the clip, ensuring it is held firmly.
3. Adjust the microphone stand and clip to the desired height and angle for optimal performance.

Image 3.2: The Proel DM220 microphone securely placed in its accompanying microphone clip.

4. 사용 설명서

4.1 전원 켜기/끄기

The Proel DM220 features an integrated on/off switch for convenient control. To activate the microphone, slide the switch to the 'ON' position. To deactivate, slide it to the 'OFF' position. Always ensure the microphone is off when not in use to prevent accidental sound capture or feedback.

4.2 마이크 배치

Due to its cardioid polar pattern, the DM220 is most sensitive to sounds directly in front of it and rejects sounds from the sides and rear. For optimal vocal performance, position the microphone directly in front of the sound source (e.g., singer's mouth) at a distance of 2-6 inches (5-15 cm). Experiment with distance to achieve the desired tone and to minimize plosive sounds (P, B sounds).

5. 유지관리

5.1 청소

• 부드럽고 마른 천으로 마이크 본체를 닦으세요.
• For the grille, use a slightly damp cloth to remove any residue, then dry thoroughly. Do not allow moisture to enter the microphone capsule.
• 독한 화학 물질, 용제 또는 연마성 세척제 사용을 피하십시오.

5.2 보관

When not in use, store the microphone in its protective carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures. This helps protect the microphone from dust, moisture, and physical damage.

6. 문제 해결

• 사운드 출력 없음:
  • Ensure the microphone's on/off switch is in the 'ON' position.
  • Check all XLR cable connections at both the microphone and the audio input device.
  • Verify that the input channel on your mixer or interface is selected and its gain/volume is turned up.
  • 케이블 고장 여부를 확인하기 위해 다른 XLR 케이블로 테스트해 보세요.
  • Test the microphone on a different input channel or device if possible.
• 낮거나 왜곡된 사운드:
  • Adjust the gain level on your mixer or audio interface. Too low gain results in weak sound, too high can cause distortion.
  • 마이크가 음원과 올바른 위치에 있는지 확인하십시오.
  • Check for any obstructions on the microphone grille.
• 피드백(날카로운 비명 소리):
  • 마이크를 스피커나 모니터에서 더 멀리 떨어뜨려 놓으세요.
  • 마이크 채널의 전체 볼륨이나 게인을 줄입니다.
  • Ensure speakers are not pointing directly at the microphone.

7. 사양

8. 보증 및 지원

Specific warranty information for the Proel DM220 Dynamic Microphone is not provided in the available product details. For warranty claims or technical support, please contact your retailer or the official Proel customer service directly. Keep your purchase receipt as proof of purchase.