Futuro 46815EN

FUTURO Comfort Stabilizing Back Support User Manual

Model: 46815EN | Brand: Futuro

제품 끝view

The FUTURO Comfort Stabilizing Back Support is designed to provide firm, customizable support for a stiff, strained, or aching back. Its anatomical design allows for a natural range of motion while ensuring the back panel evenly distributes support. Made with breathable materials, it enhances airflow to help keep skin dry, ensuring comfort during everyday activities.

FUTURO Comfort Stabilizing Back Support in packaging

Image: FUTURO Comfort Stabilizing Back Support in its retail packaging, highlighting the product's branding and key features.

주요 특징:

  • 회사 디자인: Offers customizable levels of support and compression.
  • 조절 가능한 스트랩: Provide a personalized and secure fit.
  • 통기성 소재: Enhance airflow to help keep skin dry and comfortable.
  • Anatomical Design: Allows for natural range of motion.
  • Even Support Distribution: Back panel is designed to evenly distribute support across the back.

설정 및 크기 조정

Before first use, ensure the back support is clean and free from any packaging materials. To select the correct size, measure around your waist at the navel. Refer to the sizing chart below to find your appropriate size.

Sizing chart for FUTURO back support

Image: Detailed sizing chart illustrating how to measure your waist at the navel to determine the correct size for the back support.

FUTURO Back Support Sizing Chart
크기허리둘레 (인치)허리둘레 (센티미터)
소형/중형29.0-49.0인치73.6~99.1cm
대형/초대형39.0-50.0인치99.1~127.0cm
(Not specified in input, placeholder)(Not specified in input, placeholder)(Not specified in input, placeholder)

Note: The 2XL/3XL size was mentioned in features but specific measurements were not provided in the input data.

착용 및 조정

Follow these steps to properly wear and adjust your FUTURO Comfort Stabilizing Back Support for optimal comfort and effectiveness:

  1. 지원 위치를 정하세요: Place the back support around your lower back, ensuring the padded section is centered on your spine. The wider part of the brace should be at the back, covering the lumbar area.
  2. Person wearing FUTURO back support

    Image: A person wearing the FUTURO back support, demonstrating proper placement around the lower back.

  3. Secure the Main Belt: Bring the main belt ends around to the front of your body. Overlap the ends and secure them firmly using the Velcro closure. Adjust for a snug but comfortable fit around your abdomen.
  4. 뒤쪽에 view of FUTURO back support on a person

    이미지: 후면 view of the FUTURO back support being worn, showing the anatomical design and how it conforms to the back.

  5. Adjust Side Straps for Compression: Locate the two smaller, elastic side straps. Pull these straps forward to your desired level of compression and secure them to the front of the main belt using their Velcro closures. These straps allow for fine-tuning the support and tightness.
  6. 편안함을 확인하세요: Ensure the brace feels supportive without being overly restrictive or causing discomfort. You should be able to move naturally while feeling the stabilizing effect.

The firm padding and breathable materials contribute to both effective support and comfort during extended wear.

내부 view of FUTURO back support showing padded areas

Image: Close-up of the interior of the back support, highlighting the firm, padded areas designed to target and support sore or aching muscles.

Back panel of FUTURO back support

Image: The back panel of the FUTURO back support, illustrating how it is designed to evenly distribute support across the lower back.

Breathable material of FUTURO back support

Image: Close-up of the breathable materials used in the FUTURO back support, designed to allow airflow and keep skin dry.

관리 및 유지 보수

Proper care will extend the life of your FUTURO Comfort Stabilizing Back Support. Always refer to the product's care label for specific instructions.

  • 세탁: Hand wash with mild soap in cold water. Do not use bleach or fabric softener.
  • 건조: Air dry flat. Do not machine wash or tumble dry. Do not iron.
  • 저장: Store in a cool, dry place away from direct sunlight when not in use. Ensure Velcro closures are fastened to prevent lint and debris accumulation.

문제 해결

If you experience any issues with your back support, consider the following common solutions:

  • 불편함 또는 마찰:
    • Ensure the brace is not too tight. Loosen the main belt and side straps slightly.
    • Adjust the position of the brace to ensure the padded area aligns correctly with your lower back.
    • Wear a thin layer of clothing underneath the brace if skin irritation occurs.
  • Lack of Support:
    • Tighten the main belt and side straps until you feel adequate, firm support.
    • Verify that the brace is positioned correctly on your lower back.
    • Check the sizing chart to ensure you are using the appropriate size for your waist measurement.
  • 벨크로가 제대로 붙지 않음:
    • Clean any lint or debris from the Velcro fasteners.
    • Ensure the Velcro is fully engaged when fastening.
    • If the Velcro is worn out, consider replacing the product for optimal performance.

If problems persist, consult a healthcare professional or contact Futuro customer support.

제품 사양

기인하다세부 사항
모델 번호46815EN
상표Futuro
제품 치수5 x 4 x 9.25 인치
품목 무게11.2 온스
색상회색
부서남녀공용-성인
첫 번째 가능한 날짜15년 2006월 XNUMX일

보증 및 지원

For detailed warranty information and customer support, please refer to the official Futuro website or the "Instructions for Use (IFU)" document provided with your product.

You can also find the digital version of the Instructions for Use (IFU) here: FUTURO Back Support IFU (PDF)

For further assistance, contact Futuro customer service through their official channels.

관련 문서 - 46815EN

사전view Futuro Futuro Skylight 54" Designer Range Hood Installation and Operation Manual
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Futuro Futuro Skylight 54-inch designer range hood. It includes safety warnings, blower location options, dimension details, step-by-step installation guides for both on-hood and remote blower configurations, filter and light bulb replacement procedures, radio control and button panel usage, and cleaning/disposal information.
사전view Futuro Futuro 30" 슬라이드 인서트 설치 매뉴얼
Futuro Futuro 30인치 슬라이드 인서트 설치 가이드에는 주방 가전제품을 올바르게 설치하고 통합하는 단계가 자세히 설명되어 있습니다.
사전view ALFA 피자 오븐 사용 설명서 - 북미
북미 ALFA 피자 오븐에 대한 포괄적인 사용 설명서로, 나무 연소 모델과 가스 연소 모델 모두에 대한 설치, 작동, 안전, 유지 관리 및 문제 해결 방법을 다룹니다.
사전view 알파 포르니 가스 피자 오븐 사용 설명서 및 빠른 가이드
알파 포르니(Alfa Forni) 가스 피자 오븐에 대한 종합적인 퀵 가이드로, 설치, 안전 경고, 조립, 위치 설정, 환기, 조명 지침, 그리고 필수 관리 및 유지보수 절차를 다룹니다. 최적의 성능을 위해 가정용 알파 오븐을 설치하고 유지보수하는 방법을 알아보세요.
사전view 알파 포르니 사용 설명서: 피자 오븐 설치, 작동 및 유지 관리
Alfa Forni 피자 오븐의 종합적인 사용 설명서입니다. Moderno, Classico, Futuro 등 모델에 대한 설치, 안전 지침, 나무 및 가스 작동, 유지 관리, 청소, 문제 해결 및 보증 정보가 포함되어 있습니다. 환기, 조명 및 보증에 대한 안내도 포함되어 있습니다.
사전view ALFA 피자 오븐 사용 설명서 - 북미
ALFA 피자 오븐에 대한 종합적인 사용 설명서입니다. 북미 지역 장작 및 가스 오븐의 설치, 작동, 안전, 유지보수 및 문제 해결 방법을 다룹니다. 조립, 위치 설정, 환기, 조명, 변환 및 보증 정보가 포함되어 있습니다.