제품 끝view
The Erickson 1" x 10' Retractable Ratchet Tie Down Straps (Pack of 2) are designed for light-duty applications, providing secure transport for various goods. These straps feature a retractable mechanism that stores excess webbing, preventing tangles and flapping during transit. They are ideal for securing items such as small furniture, boxes, and construction materials.
Image: A pair of Erickson Pro Series Black Retractable Ratcheting Tie-Down Straps, showcasing their compact design with hooks and the ratcheting mechanism.
안전 정보
Adhering to safety guidelines is crucial for proper and safe use of these tie-down straps. Failure to follow these instructions may result in injury or damage to property.
- Do not exceed working load limit: The maximum weight of the secured cargo must not exceed 400 Pounds.
- 사용 전 검사하세요: 사용하지 마십시오 webbing is worn or damaged.
- 보호하다 web빙: 사용하지 마십시오 webbing on sharp edges without proper edge protection.
- 정기 점검: Check the load and ratchet every 30 miles / 50 km and make adjustments when necessary to maintain tension.
- Safety Ratio: A mandatory 3:1 safety ratio ensures the maximum load capacity of the straps are not exceeded.
- 규정을 준수하세요: Always follow D.O.T. regulations when securing and hauling cargo.
설치 및 작동 지침
The Erickson Retractable Ratchet Tie-Down Straps are designed for ease of use, similar to a seatbelt mechanism, to simplify load securement.
주요 작동 특징:
- Easy Push Button Release: A red button on the ratchet mechanism allows for quick and easy release of tension and retraction of the strap.
- Stores Excess Web빙: The retractable design automatically stores any unused webbing within the ratchet mechanism, preventing tangles and flapping in the wind.
- Vinyl Coated Hooks: The hooks are vinyl coated to prevent scratching and damage to your cargo or vehicle.
단계별 사용법:
- 1. To Fasten:
Hook one end of the strap to a secure anchor point on your vehicle or trailer. Pull out the strap to the desired length, extending it across your cargo. Hook the other end of the strap to another secure anchor point. Press the red button on the ratchet mechanism to pull in any initial slack, ensuring the strap is snug against the load.
Image: Step 1 of the fastening process, showing the strap hooked to an anchor point and being pulled across the load.
- 2. To Secure:
With the strap in place, lift the ratchet handle all the way up while pressing the red button. This allows the strap to be pulled through freely. Once the desired length is achieved, release the red button. Then, give a few quick ratchets by moving the handle up and down to tighten the strap securely around your cargo. Ensure the load is stable and does not shift.
Image: Close-up of the ratchet mechanism highlighting the push button release and the vinyl coated hooks for secure attachment.
- 3. To Release:
To release the tension, lower the ratchet handle all the way down until it locks into the open position. While holding the handle down, press the red button. This will release the strap tension. Unhook both ends of the strap from their anchor points. Press the red button again to allow the strap to automatically retract and wind up the excess webbing into the mechanism for neat storage.
Image: Demonstration of the easy push button release and how the excess webbing is stored within the mechanism.
Image: Illustrates the benefit of the retractable system, showing no loose webbing flapping in the wind, enhancing safety and convenience.
Image: Shows various applications for the tie-down straps, including securing motorcycles, ATVs, and loads on vans, boats, pick-ups, and trailers.
유지
Proper maintenance will extend the life of your Erickson Retractable Ratchet Tie-Down Straps and ensure continued safe operation.
- 청소: Clean straps with mild soap and water. Rinse thoroughly and allow to air dry completely before storing. Do not use harsh chemicals or abrasive cleaners.
- 저장: Store straps in a dry place, away from direct sunlight and extreme temperatures. The retractable feature helps keep the webbing neatly stored, protecting it from environmental damage.
- 점검: 정기적으로 검사하십시오 webbing for cuts, fraying, or excessive wear. Check the hooks for bends, cracks, or corrosion. Ensure the ratchet mechanism operates smoothly and locks securely. Discard any damaged straps immediately.
문제 해결
다음은 몇 가지 일반적인 문제와 해결 방법입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Strap not retracting fully. | Webbing twisted or jammed inside the mechanism; internal spring issue. | 보장하다 webbing is not twisted before retraction. Gently pull out and re-retract. If issue persists, the internal mechanism may be damaged, and the strap should be replaced. |
| Ratchet mechanism is stiff or difficult to operate. | Dirt, debris, or corrosion in the mechanism. | Clean the mechanism thoroughly. Apply a small amount of silicone-based lubricant to moving parts. If still stiff, the mechanism may be damaged and require replacement. |
| Strap slips or does not hold tension. | Webbing is worn, damaged, or improperly threaded; ratchet teeth are worn. | 검사하다 webbing for damage and replace if necessary. Ensure the strap is correctly threaded through the ratchet. If the ratchet teeth appear worn, replace the strap. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 34415 |
| 상표 | 에릭슨 |
| 크기 | 1" x 10' (120"L x 1"W) |
| 재료 | 폴리에스터 webbing, Stainless Steel fasteners |
| 색상 | 솔리드 블랙 |
| 하중 용량 | 400 파운드 |
| 인장 강도 | 1200 파운드 |
| 조각 수 | 2 |
| 패스너 유형 | Hook (Vinyl Coated) |
| 품목 무게 | 3.5파운드 |
| 한국어: | 064383344151 |
보증 및 지원
For warranty information or technical support regarding your Erickson Pro Series Black Retractable Ratcheting Tie-Down Straps, please contact Erickson customer service directly. Refer to the product packaging or the official Erickson web최신 연락처 정보와 보증 조건은 사이트에서 확인하세요.
You can also visit the official Erickson store on Amazon for more product information and support: Erickson Amazon Store
