Dish Network 4.4 IR/UHF Pro Remote Model 176539 User Manual

소개

This manual provides instructions for the Dish Network 4.4 IR/UHF Pro Remote, model 176539. This remote is designed to operate Dish Network receivers, including the model 322, and can also be programmed to control up to three additional devices such as televisions, DVD players, VCRs, or sound systems. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication modes.

This image displays the Dish Network 4.4 IR/UHF Pro Remote 322. The remote is black with various control buttons. Key features visible include the power button (orange), volume and channel controls (purple), a directional pad (purple), and number buttons (grey). The Dish Network logo is visible at the bottom right, along with a '2' indicating its function for a second TV.

설정

1. 배터리 설치

The remote requires four (4) AAA batteries. To install:

1. 리모컨 뒷면에서 배터리 덮개를 찾으세요.
2. 덮개를 밀어서 떼어냅니다.
3. Insert four AAA batteries, ensuring correct polarity (+ and -).
4. 배터리 덮개를 다시 장착하세요.

2. Programming for Dish Network Receiver

This remote can operate in either IR (Infrared) or UHF (Ultra High Frequency) mode. The mode is typically selected via a switch or tab within the battery compartment or on the remote itself. For model 322 receivers, the remote can function as a primary remote (TV1) or a secondary remote (TV2) using either IR or UHF.

• IR 모드: Line-of-sight is required between the remote and the receiver.
• UHF 모드: Allows control without direct line-of-sight, useful for controlling receivers in another room or cabinet. The remote ships with a small UHF key for TV1.

Refer to your Dish Network receiver's manual for specific pairing instructions, as procedures may vary slightly by receiver model. Generally, this involves accessing a menu on your receiver to pair the remote.

3. Programming for Additional Devices (TV, DVD, VCR, Sound System)

The remote can be programmed to control up to four devices. To program for other devices:

1. 프로그래밍하려는 기기(예: TV, DVD 플레이어)를 켜세요.
2. 원하는 장치 버튼을 길게 누르세요(예: TV, DVD) on the remote until all device buttons light up, then release. The selected device button should remain lit.
3. Enter the 3-digit programming code for your device's brand. A list of common codes is usually provided with the remote or can be found on the Dish Network support web대지.
4. 리모컨을 장치에 대고 누르세요 힘 버튼을 누르세요. 기기가 꺼지면 코드가 올바른 것입니다.
5. If the device does not turn off, repeat steps 2-4 with the next code for your brand.
6. Once programmed, press the selected device button again to save the setting.

리모컨 조작하기

The Dish Network 4.4 remote features a variety of buttons for controlling your entertainment system. Below are descriptions of common button functions:

• 힘: 선택한 장치를 켜거나 끕니다.
• TV/비디오: Switches video input on your television.
• 음소거: 오디오를 음소거합니다.
• 볼륨 +/-: 오디오 볼륨을 조절합니다.
• 채널 +/-: 채널을 변경합니다.
• 가이드: 프로그램 가이드를 표시합니다.
• 정보: 현재 프로그램에 대한 정보를 표시합니다.
• 상기하다: 이전 채널로 돌아갑니다.
• SYS INFO: 시스템 정보에 접근합니다.
• DIRECTIONAL PAD (Arrows & SELECT): 메뉴를 탐색하고 옵션을 선택합니다.
• 취소: Exits menus or cancels actions.
• VIEW TV: Switches to live television.
• 기록: 현재 프로그램 녹화를 시작합니다.
• DVR Controls (PLAY, PAUSE, STOP, FWD, REW, SKIP): Controls playback of recorded content.
• 숫자 버튼 (0-9) : 채널 번호 또는 메뉴 선택 항목을 직접 입력합니다.
• 찾다: Accesses search functions.
• 체재: Changes video format or aspect ratio.

유지

배터리 교체

Replace batteries when the remote's response becomes sluggish or the indicator light fails to illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.

청소

To clean the remote, use a soft, dry cloth. For stubborn dirt, lightly damp천에 물을 묻혀 닦아주세요. 강한 화학 물질, 연마성 세제 또는 과도한 습기는 리모컨의 전자 장치나 마감재를 손상시킬 수 있으므로 사용하지 마세요.

문제 해결

• 리모컨이 응답하지 않음:
  • 배터리 설치를 확인하고 배터리가 새 것인지 확인하세요.
  • Ensure there are no obstructions between the remote and the receiver/device if using IR mode.
  • Verify the remote is set to the correct device mode (e.g., 앉았다 for the receiver, TV for the television).
• 작동하지 않는 특정 버튼:
  • This may indicate a worn-out button or internal issue. Try replacing batteries first.
  • If the remote is programmed for multiple devices, ensure the correct device button is selected for the function you are attempting.
• Programming issues for other devices:
  • Double-check the programming codes for your device brand.
  • Ensure the device is on and the remote is pointed directly at it during programming.
  • Some older or newer devices may not be compatible with the remote's pre-programmed codes.
• UHF mode not working:
  • Ensure the remote's UHF switch/tab is correctly set.
  • Verify the receiver is configured for UHF remote control and is properly paired.

명세서

• 모델 번호: 176539
• 제품 크기: 8 x 1 x 3 인치
• 품목 무게: 3.52 온스
• 배터리: AAA 배터리 4개 필요
• 지원되는 최대 장치 수: 4
• 호환 장치: Dish Network Satellite Receivers (e.g., Model 322), TV, DVD, VCR, Sound Systems
• 커뮤니케이션 유형: IR (Infrared) and UHF (Ultra High Frequency)
• 색상: 검은색

보증 및 지원

For specific warranty information or technical support, please contact Dish Network directly. Their official website or customer service channels can provide the most accurate and up-to-date assistance regarding your remote control and receiver.