1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Wayne CDU980E 3/4 HP Submersible Sump Pump. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1: Wayne CDU980E 3/4 HP Submersible Sump Pump
2. 안전 정보
WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded grounding-type receptacle.
- 펌프를 취급하거나 정비하기 전에 항상 전원을 차단하십시오.
- 폭발성 분위기에서는 펌프를 작동하지 마십시오.
- Ensure the electrical circuit is protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not use this pump for pumping flammable or corrosive liquids.
- Keep hands clear of the pump intake and discharge openings when the pump is connected to power.
- This pump is designed for indoor use only in sump pits.
3. 패키지 내용
모든 구성 요소가 존재하고 손상되지 않았는지 확인하세요.
- Wayne CDU980E Sump Pump with Integrated Vertical Float Switch
- 사용 설명서
4. 주요 특징
- 3/4 HP 모터: Capable of moving up to 5,490 gallons per hour (GPH).
- 내구성 있는 구조: Features corrosion-resistant stainless steel motor housing and fasteners with a cast-iron volute for extended life.
- Integrated Vertical Float Switch: Designed for reliable automatic operation, tested to 1 million cycles.
- Top Suction Design: Helps prevent air lock and minimizes clogging from debris at the bottom of the sump pit.
- 1-1/2 inch NPT Discharge: Standard size for compatibility with common plumbing codes.
- 간편한 설치: Designed for quick setup, typically within 15 minutes, without the need to drill a weep hole.
Figure 2: Key Features of the Wayne CDU980E
5. 설정 및 설치
The Wayne CDU980E sump pump is designed for installation in 11-inch diameter or larger sump pits. Follow these steps for proper installation:
- Prepare the Sump Pit: Ensure the sump pit is clean and free of debris. The pump should sit on a solid, level surface.
- 배출 파이프 연결: Thread a 1-1/2 inch NPT discharge pipe into the pump's outlet. Use appropriate sealant for a watertight connection.
- 체크 밸브를 설치하세요: Install a check valve in the discharge line above the pump to prevent water from flowing back into the sump pit when the pump shuts off.
- 펌프 위치: Carefully lower the pump into the sump pit. Ensure the float switch can move freely without obstruction from the pit walls or other pipes.
- 전기 연결: Plug the pump into a properly grounded 120V, 60Hz electrical outlet protected by a GFCI. Ensure the power cord is routed to prevent damage.
- 테스트 작업: Pour water into the sump pit to verify the float switch activates the pump and discharges water correctly.
Figure 3: Typical Sump Pump Installation
설치 끝view 동영상
비디오 1: 오버view of a similar Wayne sump pump, demonstrating its features and installation considerations. This video is provided by the manufacturer.
6. 사용 설명서
The Wayne CDU980E operates automatically via its integrated vertical float switch. When water in the sump pit rises and lifts the float to the 'ON' level (approximately 9 inches), the pump will activate and begin discharging water. Once the water level drops and the float returns to the 'OFF' level (approximately 4 inches), the pump will shut off. This automatic operation ensures your basement remains dry without constant manual intervention.
Figure 4: Wayne CDU980E Sump Pump Label
7. 유지관리
Regular maintenance helps ensure the longevity and reliable operation of your sump pump:
- 정기적으로 검사하세요: Periodically check the sump pit for debris that could obstruct the float switch or pump intake.
- 흡기 스크린 청소: Ensure the pump's intake screen is clear of leaves, dirt, or other foreign objects.
- Test Float Switch: Manually lift the float switch to ensure the pump activates and deactivates correctly. This should be done monthly, especially during rainy seasons.
- Check Discharge Line: Verify that the discharge pipe is not clogged or frozen, especially in colder climates.
- 전원 코드 검사: 전원 코드에 손상이나 마모 흔적이 있는지 확인하십시오.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 작동하지 않음 | No power; tripped GFCI; stuck float switch; motor failure. | Check power supply and GFCI. Clear float switch. Consult a qualified technician for motor issues. |
| 펌프가 지속적으로 작동 | Stuck float switch; check valve failure; continuous water inflow. | Clear float switch. Inspect/replace check valve. Address source of continuous water. |
| 펌프는 작동하지만 물이 배출되지 않습니다. | Clogged intake or discharge pipe; air lock; low water level. | Clear obstructions. Ensure pump is fully submerged. Check for weep hole (not needed for this model, but common issue). |
| 펌프 소음이 심하거나 진동이 과도합니다. | Debris in impeller; pump not stable; worn bearings. | Disconnect power and inspect impeller for debris. Ensure pump is on a stable surface. Contact support for internal issues. |
9. 사양
Figure 5: Wayne CDU980E Product Dimensions
| 기인하다 | 값 |
|---|---|
| 상표 | 웨인 |
| 모델 번호 | CDU980E (58321-WYN3) |
| 마력 | 0.75마력 |
| 최대 유량 | 5490GPH(분당 92갤런) |
| 최대 리프팅 높이 | 32 피트 |
| 권tage | 120 볼트 |
| 전원 | 코드식 전기 |
| 재료 | Cast Iron and Stainless Steel |
| 제품 치수 | 10.5인치 길이 x 9인치 너비 x 11인치 높이 |
| 품목 무게 | 12 파운드 |
| 특별 기능 | Integrated Vertical Float Switch, Easy to Install |
Figure 6: Performance Data for CDU980E
10. 보증 및 지원
The Wayne CDU980E Submersible Sump Pump comes with a 5년 제조사 보증. For warranty claims, technical assistance, or replacement parts, please contact Wayne Water Systems customer support. Refer to the contact information provided in your product packaging or visit the official Wayne web대지.
제조업체: 웨인 워터 시스템
