1. 제품 오버view
The AEI ICA-19-32 is an automatic pneumatic carton stapler designed for high-speed and efficient stapling of boxes. This robust tool features an air-driven mechanism, automatic anvil return, and adjustable staple clinching and penetration, making it suitable for various packaging applications. Its lightweight design ensures easy operation and reduced user fatigue.
주요 특징은 다음과 같습니다.
- Air-driven pneumatic stapling for high speed and efficiency.
- Automatic anvil return mechanism.
- Adjustable staple clinching and penetration for versatile use.
- Lightweight design (7 lbs) for easy operation.
- Compatible with 1-1/4" crown staples and 5/8" & 3/4" length staples.
- Staple capacity of 120.
Figure 1: AEI ICA-19-32 Automatic Pneumatic Carton Stapler. This image shows the blue-colored pneumatic stapler from a side angle, highlighting its main body, handle, and the long magazine for staples.
2. 안전 정보
Always observe the following safety precautions when operating the ICA-19-32 pneumatic carton stapler to prevent injury and damage to the tool.
- 매뉴얼을 읽어보세요: 작동하기 전에 이 설명서의 모든 지침과 경고를 철저히 읽고 이해하십시오.
- 개인 보호 장비(PPE): Always wear safety glasses with side shields that conform to ANSI Z87.1. Hearing protection is also recommended.
- 급기: Ensure the air compressor and air hose are rated for the required pressure and are in good working condition. Do not exceed the maximum operating pressure of the tool.
- 공기 분리: 스테이플을 장전하거나, 유지 보수를 하거나, 걸림을 제거하거나, 공구를 사용하지 않을 때는 항상 공기 공급을 차단하십시오.
- 안전한 작업물: Ensure the material being stapled is stable and secure.
- 손을 깨끗이 유지하십시오: Never place hands or other body parts near the stapling area.
- 적절한 환기: 환기가 잘 되는 곳에서 도구를 사용하십시오.
- 도구 상태: Do not operate the tool if it is damaged or malfunctioning. Have it inspected and repaired by qualified personnel.
- 올바른 체결 부품을 사용하십시오: Only use staples of the specified dimensions and type for this tool.
3. 설정
3.1 풀기
Carefully remove the ICA-19-32 stapler from its packaging. Inspect the tool for any signs of damage that may have occurred during shipping. Retain the packaging for future storage or transport.
3.2 공기 공급 장치 연결
- 공기 압축기가 꺼져 있고 공기 탱크의 공기가 완전히 빠져 있는지 확인하십시오.
- Attach a quick-connect coupler (not included) to the air inlet port of the stapler.
- Connect the air hose from your compressor to the quick-connect coupler on the stapler.
- Set the air compressor regulator to the recommended operating pressure (refer to specifications section). Do not exceed 90 PSI (6.2 bar).
- 공기 압축기를 켜세요.
3.3 스테이플 장착
경고: Disconnect the air supply before loading staples to prevent accidental discharge.
- Ensure the air hose is disconnected from the tool.
- Locate the staple magazine release latch, typically at the rear or side of the magazine.
- 탄창 팔로어를 제자리에 딸깍 소리가 날 때까지 뒤로 당기십시오.
- Insert a stick of compatible staples (1-1/4" crown, 5/8" or 3/4" length) into the magazine channel with the staple points facing down.
- Release the magazine follower, allowing it to gently push the staples forward. Ensure staples are seated correctly.
- 공기 공급 장치를 다시 연결하십시오.
4. 사용 설명서
4.1 Adjusting Staple Clinching and Penetration
The ICA-19-32 allows for adjustment of staple clinching (how tightly the staple bends) and penetration (how deep the staple goes into the material). Refer to the tool's specific adjustment mechanism, usually a knob or lever near the stapling head. Test on scrap material to achieve desired results.
- 침투: Adjust for different material thicknesses. Deeper penetration for thicker materials, shallower for thinner.
- Clinching: Adjust to ensure the staple legs are properly bent and secured against the carton.
4.2 스테이플링 절차
- Ensure safety glasses are worn and the air supply is connected.
- Position the stapler's anvil firmly against the carton flap where the staple is to be driven. The anvil should be underneath the material.
- Press the stapler firmly against the material.
- Depress the trigger to drive a staple. The automatic anvil return will reset for the next staple.
- 스테이플러로 스테이플을 찍을 때마다 방아쇠를 놓으세요.
- Move to the next stapling point and repeat the process.
- When finished, disconnect the air supply and store the tool safely.
5. 유지관리
Regular maintenance ensures the longevity and optimal performance of your ICA-19-32 stapler.
5.1 청소
- Disconnect the air supply before cleaning.
- Wipe down the exterior of the tool with a clean, dry cloth.
- Periodically clean the staple magazine and nosepiece to remove dust, debris, or adhesive residue that could cause jams. Use compressed air if necessary, ensuring proper eye protection.
5.2 윤활
Apply a few drops of pneumatic tool oil into the air inlet port daily or before each use. This lubricates internal components and prevents corrosion. Do not use motor oil or other non-pneumatic lubricants.
5.3 보관
When not in use, disconnect the air supply and store the stapler in a clean, dry environment, away from extreme temperatures and direct sunlight. Store in its original case if available.
6. 문제 해결
This section addresses common issues you might encounter with your ICA-19-32 stapler.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Stapler not firing or weak firing. | Low air pressure; Air leak; No staples; Driver blade worn. | Check air compressor pressure and regulator setting; Inspect air hose and connections for leaks; Load staples; Contact service for driver blade replacement. |
| Staples jamming. | Incorrect staple size; Damaged staples; Debris in magazine/nosepiece; Worn driver blade. | Ensure correct staple size (1-1/4" crown, 5/8" or 3/4" length); Replace damaged staples; Clean magazine and nosepiece; Contact service for driver blade replacement. |
| 스테이플이 완전히 박히지 않았습니다. | Low air pressure; Incorrect penetration setting; Material too hard; Worn driver blade. | Increase air pressure (within limits); Adjust penetration setting; Ensure material is suitable for stapling; Contact service for driver blade replacement. |
| Air leaking from tool. | Loose fittings; Damaged O-rings/seals. | 연결부를 단단히 조이십시오. O링/씰 교체는 서비스 센터에 문의하십시오. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact AEI customer support or a qualified service technician.
7. 사양
| 기인하다 | 값 |
|---|---|
| 모델 번호 | ICA-19-32 |
| 상표 | AEI (American International Electric) |
| 작동 모드 | 오토매틱 |
| Staples Dimension Crown | 1-1/4인치 |
| Staples Dimension Length | 5/8" & 3/4" |
| 스테이플 용량 | 120 |
| 품목 무게 | 7파운드(3.17kg) |
| 색상 | 파란색 |
| 제조업체 | 아메리칸 인터내셔널 일렉트릭 |
8. 보증 및 지원
8.1 보증 정보
Specific warranty terms for the AEI ICA-19-32 Automatic Pneumatic Carton Stapler are typically provided with the product at the time of purchase or can be obtained directly from American International Electric. Please retain your proof of purchase for warranty claims.
For details regarding warranty coverage, duration, and conditions, please refer to the warranty card included with your product or visit the official AEI web대지.
8.2 고객 지원
For technical assistance, spare parts, or service inquiries, please contact American International Electric customer support. Contact information can usually be found on the manufacturer's web사이트 또는 제품 포장에 표시되어 있습니다.
When contacting support, please have your model number (ICA-19-32) and purchase date readily available.
