소개
This user manual provides essential information for the proper use, setup, and maintenance of your Laica PS1033 Electronic Personal Scale. Please read this manual thoroughly before using the device to ensure safe and effective operation.
Important Warning: The product packaging may contain different information than what is shown on our site. Please always read the label, warnings, and instructions provided with the product before use or consumption.
제품 끝view
The Laica PS1033 is a digital personal scale designed for accurate weight measurement. It features an LCD display and a durable plastic platform.
Image: Laica PS1033 Electronic Personal Scale. This image shows the top view of the white rectangular scale with rounded corners. An LCD display is visible at the top center, showing "53.1". The "LAICA" logo is printed at the bottom center of the scale.
설정
1. 풀기
Carefully remove the scale from its packaging. Inspect the device for any signs of damage. Keep the packaging for future storage or transport.
2. 배터리 설치
The Laica PS1033 scale uses AAA alkaline batteries. Locate the battery compartment on the underside of the scale. Open the compartment cover and insert the batteries, ensuring correct polarity (+/-). Close the cover securely.
3. 배치
Place the scale on a hard, flat, and stable surface. Uneven or soft surfaces (like carpets) can affect measurement accuracy.
작동 지침
1. 스케일 초기화
Before the first use, or if the scale has been moved, it is recommended to initialize it. Gently tap the center of the scale with your foot to turn it on. The display will show "0.0" or "CAL" and then turn off. This indicates the scale is ready for use.
2. 측정하기
- Step onto the scale barefoot and stand still, distributing your weight evenly.
- 화면에 몸무게가 표시됩니다. 수치가 안정될 때까지 기다리세요.
- Step off the scale. The reading will remain on the display for a few seconds before the scale automatically turns off.
3. Unit Conversion (if applicable)
If your scale supports multiple units (e.g., kg, lb, st), there may be a button on the underside of the scale to switch between units. Refer to the markings near the button for available options.
유지
1. 청소
부드러운 천으로 저울 표면을 청소하세요.amp 천을 사용하십시오. 연마성 세제를 사용하거나 저울을 물에 담그지 마십시오. 보관하거나 다음 사용 전에 저울이 건조한지 확인하십시오.
2. 보관
체중계를 서늘하고 건조한 곳에 보관하세요. 극한의 온도와 직사광선을 피하세요.
3. 배터리 교체
디스플레이에 "Lo"가 표시되거나 화면이 어두워지면 배터리를 교체해야 합니다. 설정 섹션의 배터리 설치 단계를 따르십시오.
문제 해결
- 화면이 표시되지 않거나 눈금이 켜지지 않습니다: 배터리 설치를 확인하고 배터리가 완전히 방전되지 않았는지 확인하세요. 필요하면 교체하세요.
- 부정확한 판독: Ensure the scale is on a hard, flat surface. Re-initialize the scale by tapping it to turn on and off before stepping on. Ensure you are standing still and centered.
- "Err" or "O-Ld" on Display: This usually indicates an overload. The scale's maximum capacity is 180 kg. Step off the scale immediately.
- "Lo" on Display: 배터리 잔량이 부족합니다. 교체하세요.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | PS1033BL |
| 상표 | 라이카 |
| 디스플레이 유형 | 액정표시장치 |
| 색상 | 하얀색 |
| 중량 제한 | 180 킬로그램 |
| 제품 크기(LxWxH) | 31.4 x 31 x 3.3cm |
| 제품 무게 | 1.77kg |
| 배터리 유형 | AAA 알칼리성 |
| 폼 팩터 | 미니 |
보증 및 지원
For warranty information and customer support, please refer to the documentation included with your product or visit the official Laica web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
For further assistance, you may contact Laica customer service. Contact details are typically available on the manufacturer's web사이트 또는 제품 포장.
