1. 서론
This manual provides detailed instructions for the safe and efficient use of your SICCE Syncra Silent 2.0 Multifunction Water Pump. Designed for versatility and quiet operation, this pump is suitable for various applications including aquariums, indoor fountains, ponds, and hydroponic systems. Please read this manual thoroughly before installation and operation.
Image 1.1: The SICCE Syncra Silent 2.0 Multifunction Water Pump.
The Syncra Silent series combines high performance with energy efficiency and extremely quiet operation. Its robust design ensures long-term reliability when properly maintained.
Image 1.2: The Syncra Silent pump is suitable for aquariums, chillers, hydroponics, fountains, and industrial applications.
2. 중요 안전 지침
경고: 부상을 방지하기 위해 다음과 같은 기본적인 안전 수칙을 준수해야 합니다.
- Read and follow all safety instructions and all important notices on the appliance before using it.
- 위험 – To avoid possible electric shock, special care should be taken since water is used in the use of aquarium equipment. For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
- If the appliance falls into water, DO NOT reach for it. First, unplug it and then retrieve it. If electrical components get wet, unplug the appliance immediately.
- 제품에 비정상적인 물 누출 징후가 보이면 즉시 전원에서 플러그를 뽑으세요.
- 설치 후 기기를 주의 깊게 검사하십시오. 젖지 않도록 의도된 부분에 물이 있는 경우 플러그를 꽂아서는 안 됩니다.
- 코드나 플러그가 손상되었거나 오작동 중이거나 떨어뜨리거나 어떤 식으로든 손상된 기기는 작동하지 마십시오.
- To avoid the possibility of the appliance plug or receptacle getting wet, position the aquarium stand and tank to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A "drip loop" should be arranged by the user for each cord connecting an aquarium appliance to a receptacle. The "drip loop" is that part of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water from traveling along the cord and coming into contact with the receptacle. If the plug or receptacle does get wet, DO NOT unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in the receptacle.
- 어린이가 가전제품을 사용하거나 어린이 근처에서 사용할 때는 면밀한 감독이 필요합니다.
- 부상을 방지하기 위해 히터, 반사판 등과 같은 움직이는 부분이나 뜨거운 부분을 만지지 마십시오.amp 전구 등
- 사용하지 않을 때, 부품을 끼우거나 떼기 전, 청소하기 전에는 항상 콘센트에서 기기를 뽑아야 합니다. 코드를 잡아당겨 콘센트에서 플러그를 뽑지 마십시오. 플러그를 잡고 당겨서 분리하십시오.
- 기기를 의도된 용도 외에 사용하지 마십시오. 기기 제조업체에서 권장하거나 판매하지 않는 부착물을 사용하면 안전하지 않은 상태가 발생할 수 있습니다.
- 본 기기를 날씨나 영하의 온도에 노출되는 곳에 설치하거나 보관하지 마십시오.
- 기기를 작동하기 전에 기기가 단단히 설치되었는지 확인하십시오.
- 기기에 있는 모든 중요 고지 사항을 읽고 준수하십시오.
3. 패키지 내용
패키지를 열 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.
- SICCE Syncra Silent 2.0 Water Pump
- Pre-chamber with adjustable flow control
- 임펠러 커버
- Suction cups (pre-installed or separate)
- Various barb and threaded fittings for hose connections
- 사용 설명서(본 문서)
Image 3.1: Main components of the Syncra Silent pump, including the prechamber, impeller cover, and suction cups.
Image 3.2: Various barb and threaded fittings for different Syncra Silent models (0.5/1.0, 1.5, 2.0/2.5/3.0, 3.5/4.0/5.0).
4. 설정 및 설치
The Syncra Silent 2.0 pump can be used in two primary configurations: submersed or in-line (external).
4.1 Submersed Use
- Attach the appropriate barb fitting to the pump's outlet.
- Connect your hose to the barb fitting.
- Ensure the suction cups are securely attached to the bottom of the pump.
- Place the pump entirely underwater in your aquarium, sump, pond, or reservoir. Ensure it is stable and not obstructed.
- Route the power cord safely, creating a drip loop before plugging into an electrical outlet.
4.2 In-line (External) Use
- Attach the appropriate threaded fittings to both the inlet and outlet of the pump.
- Connect your inlet and outlet hoses securely to the fittings.
- Position the pump on a stable, level surface. The included suction cups can help reduce vibrations.
- Ensure the pump is not exposed to direct weather or freezing temperatures if used outdoors.
- Route the power cord safely, creating a drip loop before plugging into an electrical outlet.
Image 4.1: Illustration of submersed and in-line installation methods for the Syncra Silent pump.
4.3 Flow Control and Features
The Syncra Silent 2.0 features a prechamber with adjustable flow control, allowing you to regulate the water flow rate. The pump is designed for tool-free disassembling for easy maintenance. Taller suction cups are included to prevent vibrations and ensure quiet operation.
Image 4.2: Key features include tool-free disassembling, adjustable flow control prechamber, and double high suction cups.
5. 사용 설명서
Once installed, ensure all connections are secure and the pump is positioned correctly for your application.
- 전원 켜기: Plug the pump into a suitable electrical outlet. The pump should start immediately.
- 흐름 조정: If your model includes an adjustable flow control, rotate the prechamber dial to increase or decrease the water flow as needed for your system.
- 모니터 작동: Observe the pump for the first few minutes to ensure proper water flow and quiet operation. Some initial air bubbles or slight noise may occur as air is purged from the system.
- 지속적인 사용: The Syncra Silent pump is designed for continuous operation.
메모:
- The pump is designed to be ultra-quiet. If you notice excessive noise, refer to the troubleshooting section.
- Ensure the pump is always submerged if used in a submersible configuration to prevent dry running, which can damage the motor.
6. 유지관리 및 청소
Regular maintenance ensures the longevity and optimal performance of your Syncra Silent pump. The pump features a special recirculation feature for rotor self-cleaning, but periodic manual cleaning is still recommended.
- 전원 분리: 유지보수를 하기 전에 항상 펌프의 전원 플러그를 콘센트에서 뽑으십시오.
- 분해 : The pump is designed for tool-free disassembly. Gently pull the front cover (prechamber) to remove it. Then, remove the impeller cover and the impeller assembly.
- 깨끗한 구성 요소:
- Clean the impeller, impeller shaft, and the pump housing interior using a soft brush and clean water.
- Remove any debris, algae, or mineral deposits that may have accumulated.
- For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing with clean water.
- 구성 요소 검사: Check the impeller for any signs of wear or damage. Ensure the ceramic shaft and bushings are intact. Replace any worn or damaged parts with genuine Sicce spare parts.
- 재조립: Reassemble the pump in reverse order, ensuring all parts fit securely.
- 시험: After reassembly, place the pump back into its operating environment and plug it in to test its function.
Image 6.1: The high-quality impeller component, crucial for silent and energy-saving performance.
7. 문제 해결 가이드
If your SICCE Syncra Silent 2.0 pump is not functioning as expected, consult the following table for common issues and solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Pump does not start or runs intermittently. |
|
|
| 물 흐름 감소. |
|
|
| 과도한 소음 또는 진동. |
|
|
8. 기술 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | Syncra Silent 2.0 |
| 상표 | 시체 |
| 전원 | 교류/직류 |
| 권tage | 120 볼트 |
| 왓tage | 35 와트 |
| 최대 유량 | 568 GPH (approx. 1 Gallon Per Minute) |
| 최대 리프팅 높이 | 1.5피트(0.45미터) |
| 제품 크기(L x W x H) | 4.9" x 3" x 3.8"(12.4cm x 7.6cm x 9.6cm) |
| 품목 무게 | 16온스(1파운드) |
| 재료 | Stainless Steel (internal components), Durable Plastic |
| 응용 프로그램 | Aquariums, Fountains, Ponds, Hydroponics, Terrariums |
| 호환성 | Freshwater & Saltwater |
Image 8.1: Dimensional drawings for various Syncra Silent pump models (0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0).
Image 8.2: Visual comparison of different Syncra Silent pump sizes.
9. 보증 및 지원
The SICCE Syncra Silent 2.0 pump comes with a standard 3년 보증. 이 보증은 다음으로 확장될 수 있습니다. 5년 with online product registration. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please visit the official Sicce web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 또한 Sicce Store on Amazon 추가 제품 정보 및 지원 리소스를 확인하세요.
Image 9.1: Sicce, a brand with over 40 years of experience in the aquarium and gardening market.
