1. 제품 오버view
The Sicce Scuba Aquarium Heater is an automatic, fully submersible heater constructed from durable, high thermal conductivity glass. It is specifically designed for maintaining optimal water temperatures in both freshwater and saltwater aquariums.
주요 특징은 다음과 같습니다.
- 담수 및 바닷물 수족관에 적합합니다.
- Precise temperature adjustment from 18°C to 32°C (64°F to 90°F).
- Completely submersible design.
- Integrated overheating protection for dry operation.
- On/off control light for operational status indication.
Image of the Sicce Scuba Aquarium Heater, showing its submersible glass body and temperature adjustment knob.
2. 안전 지침
Please read and understand all safety instructions before installing or operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the heater is fully submerged in water before connecting it to a power source.
- Unplug the heater from the power outlet before performing any maintenance, cleaning, or handling of the aquarium.
- Do not operate the heater if the power cord or the heater body is damaged.
- This appliance is for indoor use only and must not be used in wet conditions outside of the aquarium.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 전원 코드를 따라 물이 흘러 콘센트로 들어가는 것을 방지하기 위해 코드에 물받이 고리를 만들어 주십시오.
- Never attempt to repair the heater yourself. Contact qualified personnel for service.
3. 설정
- 짐 풀기: 히터를 포장에서 조심스럽게 꺼내십시오. 손상된 부분이 있는지 확인하십시오.
- 놓기: Position the heater vertically in the aquarium, ensuring it is completely submerged in water. Avoid placing it directly in the substrate or near strong water currents that could expose it to air.
- 설치: Use the included suction cups to securely attach the heater to the inside glass wall of the aquarium. Ensure it is stable and cannot be dislodged by fish or other aquarium inhabitants.
- 온도 설정: Rotate the adjustment knob located at the top of the heater to set your desired water temperature. The temperature scale is marked in degrees Celsius.
- 전원 연결: Once the heater is securely installed and fully submerged, connect the power plug to a suitable, grounded electrical outlet.
4. 사용 설명서
After setup, the Sicce Scuba Aquarium Heater will begin to operate automatically.
- The heater is designed to maintain the set temperature by automatically turning on and off as needed.
- The integrated control light will illuminate when the heater is actively heating the water. It will turn off when the desired temperature is reached.
- Allow approximately 15-30 minutes for the heater to stabilize and for the aquarium water temperature to begin adjusting after initial installation or after changing the temperature setting.
- Monitor the aquarium temperature with a separate thermometer to ensure the heater is functioning correctly and maintaining the desired temperature.
5. 유지관리
정기적인 유지관리를 통해 히터의 최적의 성능과 수명을 보장할 수 있습니다.
- 전원 분리: Always unplug the heater from the power outlet before performing any maintenance or cleaning.
- 청소: Periodically remove the heater from the aquarium and gently clean its surface to remove any algae, mineral deposits, or debris. Use a soft cloth or sponge and aquarium-safe cleaning solutions if necessary. Avoid abrasive materials that could scratch the glass.
- 점검: Regularly inspect the heater body, power cord, and plug for any signs of wear, cracks, or damage. If any damage is observed, discontinue use immediately and replace the heater.
- 재설치: After cleaning, ensure the heater is fully submerged and securely mounted before reconnecting it to power.
6. 문제 해결
If you encounter issues with your Sicce Scuba Aquarium Heater, refer to the following troubleshooting guide:
- 히터가 켜지지 않음:
- Check if the power plug is securely inserted into a working electrical outlet.
- Ensure the heater is fully submerged in water. The overheating protection will prevent it from operating if not submerged.
- Verify the temperature setting is above the current aquarium water temperature.
- Aquarium temperature is too high or too low:
- Confirm the temperature setting on the heater matches your desired temperature.
- Check for adequate water circulation around the heater. Poor circulation can lead to uneven heating.
- 히터의 와트 수를 확인하세요.tage is appropriate for your aquarium size.
- Use a separate, accurate thermometer to verify the actual water temperature.
- Control light not working:
- If the heater is heating but the light is off, the light may be faulty. The heater may still be functional.
- If the heater is not heating and the light is off, refer to the "Heater not turning on" section.
If these steps do not resolve the issue, please contact Sicce customer support.
7. 사양
| 모델 번호: | 989067 |
| 힘: | 300와트 |
| 치수(길이 x 너비 x 높이): | 38.1 x 6.2 x 6.2cm(15 x 2.4 x 2.4인치) |
| 무게: | 230그램(0.51파운드) |
| 온도 범위: | 18°C - 32°C (64°F - 90°F) |
| 호환성: | 담수 및 해수 수족관 |
| 원산지: | 이탈리아 |
8. 보증 및 지원
Warranty information for your Sicce Scuba Aquarium Heater is typically provided with the product packaging or can be found on the official Sicce web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For technical support, spare parts, or further assistance, please contact Sicce customer service through their official website or authorized distributors. Refer to your retailer's return policy for details on returns and defective products.
Sicce Official Web대지: www.sicce.com
