제품 끝view
The Hayward SPX1700FG Pipe Plug with Gasket is a replacement component designed for various Hayward pool pump models. This plug, accompanied by a gasket, is crucial for maintaining a watertight seal in your pump system, preventing leaks and ensuring optimal performance.
Image: Hayward SPX1700FG Pipe Plug with Gasket. This image shows the black pipe plug with its threaded end and a separate black O-ring gasket, highlighting the two components of the replacement part.
호환성
This pipe plug with gasket is compatible with a wide range of Hayward pump models, ensuring a proper fit and function for your pool system. Verify your pump model against the list below:
- 헤이워드 슈퍼펌프 SP2600X 시리즈: SP2600X5, SP2605X7, SP2607X10, SP2610X15, SP2615X20, SP2621X25
- Hayward Power-Flo LX and Power-Flo II Pump Series: SP1540C, SP1580, SP1580X15, SW1585X20, SW1585X25, SP1750, SP1775, SP1780
- Hayward MaxFlo Pump SP1800X Series: SP1800X5, 1805X7, 1807X10, 1808X10, 1810X15, 1811X15
- Hayward Power-Flo LX Pump SP1580 Series: SP1575LX, SP1580, SP1580X15, SP1520UN, EP1500LX
Image: Multiple Hayward SPX1700FG Drain Plugs with Gaskets. This image displays several black pipe plugs and O-rings, illustrating the typical packaging or quantity available for replacement parts.
특징
- 직접 교체: Specifically designed as a pipe plug with gasket replacement for the listed Hayward pump models.
- 내구성 있는 구조: Made from high-quality, durable materials to resist stripping, breaking, and UV degradation, ensuring long-lasting performance.
- Watertight Seal: Includes a high-quality O-ring gasket to ensure a secure and watertight seal, preventing leaks and maintaining pump efficiency.
- 간편한 설치: Designed for straightforward installation, allowing for quick replacement and minimal downtime.
설정 및 설치
Proper installation of the pipe plug and gasket is essential for preventing leaks and ensuring the efficient operation of your pool pump. Follow these general steps:
- 안전이 최우선입니다. Always turn off the power to your pool pump at the circuit breaker before performing any maintenance or installation.
- 펌프 배수: If replacing an existing plug, ensure the pump is drained of water. Place a bucket or container beneath the drain port to catch any remaining water.
- 기존 플러그를 제거하십시오(해당되는 경우): Carefully unscrew and remove the old pipe plug and gasket. Inspect the threads of the pump's drain port for any damage or debris.
- Prepare New Gasket: Ensure the new O-ring gasket is properly seated around the base of the new pipe plug. A small amount of silicone lubricant can be applied to the O-ring to aid in sealing and prevent pinching.
- 새 플러그를 설치하세요: Insert the new pipe plug with the gasket into the pump's drain port. Hand-tighten the plug until it is snug. 너무 조이지 마세요, as this can damage the plug or the pump housing.
- 누출 확인: Restore power to the pump and turn it on. Monitor the drain port for any signs of leaks. If a leak occurs, turn off the pump, slightly tighten the plug, and recheck.
Video: Hayward SPX1700FG Swimming Pool Pump Pipe Plug. This video demonstrates the physical appearance and features of the Hayward SPX1700FG pipe plug and gasket, showing its design and how the gasket fits.
Video: Drain Plugs with Gaskets Compatible with Hayward SPX1700FG. This video provides a visual guide to the drain plugs and gaskets, emphasizing their compatibility and the importance of the O-ring for a secure fit.
Video: Drain Plugs with O-Ring for Hayward Pumps SPX1700FG. This video showcases the drain plugs and their accompanying O-rings, demonstrating how the O-ring creates a tight seal to prevent leaks in Hayward pumps.
유지
Regular maintenance of your pipe plug and gasket can extend its lifespan and prevent issues:
- 계절별 점검: Before and after each swimming season, inspect the pipe plug and gasket for any signs of wear, cracking, or damage.
- Gasket Lubrication: Periodically apply a silicone-based lubricant to the O-ring gasket to keep it pliable and ensure a good seal. Avoid petroleum-based lubricants, as they can degrade rubber.
- 적절한 보관: If removing the plug for winterization, clean it thoroughly and store it in a cool, dry place away from direct sunlight and harsh chemicals.
- 너무 조이는 것을 피하세요: When reinstalling, hand-tighten only. Overtightening can compress the gasket excessively, leading to premature wear or damage to the plug and pump housing.
문제 해결
If you encounter issues with your pipe plug, consider the following troubleshooting steps:
- Leakage at Drain Port:
- Ensure the plug is hand-tightened securely.
- Inspect the O-ring gasket for cracks, tears, or flattening. Replace if damaged.
- Check the threads of both the plug and the pump port for debris or damage. Clean or replace as necessary.
- Apply silicone lubricant to the O-ring to improve the seal.
- Difficulty Removing/Installing Plug:
- If stuck, try applying gentle, steady pressure. Avoid excessive force that could break the plug.
- Ensure threads are clean and free of debris.
- Lubricate the O-ring and threads with silicone lubricant before installation.
명세서
| 기인하다 | 값 |
|---|---|
| 상표 | 헤이워드 |
| 모델 번호 | SPX1700FG |
| 색상 | 검은색 |
| 재료 | 플라스틱 |
| 제품 치수 | 2.31인치 길이 x 2.31인치 너비 x 1.85인치 높이 |
| 품목 무게 | 0.32온스(약 9.07g) |
| 전원 | 수동 |
| 한국어: | 610377040662 |
보증 및 지원
For specific warranty information and technical support regarding your Hayward SPX1700FG Pipe Plug with Gasket, please refer to the official Hayward web해당 웹사이트를 방문하거나 Hayward 고객 서비스 센터에 직접 문의하십시오. 보증 청구를 위해 구매 영수증을 보관하십시오.
Note: This product is a replacement part. Warranty terms may vary for replacement components.
