소개
This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Uline Comfort-Grip Knife. Please read this manual thoroughly before operating the knife and retain it for future reference.
안전 정보
WARNING: Blades are extremely sharp. Handle with extreme care. Always retract the blade when not in use. Keep out of reach of children.
Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when handling or replacing blades.
구성 요소
The Uline Comfort-Grip Knife consists of the following main components:
- 핸들: 편안한 그립감을 위해 인체공학적으로 디자인되었습니다.
- Blade Retraction Button: Used to extend and retract the blade.
- 잎: Replaceable carbon steel utility blade.
- Blade Release Mechanism: Allows for quick blade changes.
설정
Blade Installation (Initial Setup)
Your Uline Comfort-Grip Knife comes with one blade pre-installed or included separately. If the blade is not installed, follow these steps:
- Locate the blade release mechanism, typically a button or lever near the front of the knife.
- Press and hold the blade release mechanism.
- Carefully insert a new utility blade into the blade slot until it clicks into place. Ensure the blade is oriented correctly with the sharp edge facing forward.
- Release the blade release mechanism. Gently pull on the blade to ensure it is securely locked.
메모: Always ensure the blade is fully seated and locked before use to prevent accidental dislodgement.
작동 지침
블레이드 확장 및 축소
The Uline Comfort-Grip Knife features a retractable blade with three positions for versatility and safety.
- To extend the blade, locate the textured thumb slide button on the top of the handle.
- Push the thumb slide button forward until the blade extends to your desired cutting depth. The knife has three distinct blade positions.
- To retract the blade, pull the thumb slide button backward until the blade is fully enclosed within the handle.
중요한: Always retract the blade fully when the knife is not in active use or when storing it.
절단 기술
최적의 성능과 안전을 위해:
- 항상 몸에서 잘라내십시오.
- Use a cutting mat or a sacrificial surface underneath the material being cut.
- Apply firm, even pressure. Do not force the blade.
- For thicker materials, make multiple shallow passes rather than one deep cut.
유지
블레이드 교체
Dull blades are dangerous and can lead to accidents. Replace the blade as soon as it shows signs of dullness or damage.
- Ensure the blade is fully retracted.
- Locate and press the blade release mechanism.
- Carefully slide the old blade out. Dispose of used blades safely in a designated blade disposal container or wrapped securely to prevent injury.
- Insert a new Uline replacement blade (available separately) into the slot until it locks into place.
- Release the blade release mechanism and verify the new blade is secure.
청소 및 보관
Keep your knife clean and dry to ensure longevity and proper function.
- Wipe the knife clean with a dry cloth after each use.
- Do not immerse the knife in water or cleaning solutions.
- Store the knife in a dry place with the blade fully retracted, away from moisture and extreme temperatures.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 칼날이 부드럽게 늘어나거나 줄어들지 않습니다. | Debris in the blade channel; mechanism obstruction. | Clean the blade channel of any debris. Ensure the blade is not bent or damaged. |
| Blade feels loose or wobbly. | Blade not fully seated; worn blade release mechanism. | Ensure the blade is correctly installed and locked. If the issue persists, the knife may need replacement. |
| Knife not cutting effectively. | 날이 둔해지거나 손상됨. | Replace the blade with a new, sharp Uline replacement blade. |
명세서
- 모델: B004SIPL18
- 상표: 유라인
- Handle Dimensions (L x H x D): 6 x 1.3 x 0.8 인치
- Blade Dimensions (L x H): 2.4 x 0.74 인치
- 블레이드 두께: 0.6mm (XNUMXmm)
- 손잡이 소재: Zinc / Rubber
- 블레이드 소재: 탄소강
- 핸들 유형: 수동 수납식
- 품목 무게: 4.8 온스
- 첫 이용 가능 날짜: 17년 2011월 XNUMX일
보증 정보
ULINE products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official ULINE website. Typically, products are covered against defects in materials and workmanship under normal use.
고객 지원
If you have any questions, require assistance, or need to order replacement parts (such as blades), please contact ULINE customer support:
- Web대지: www.uline.com
- 핸드폰: Please refer to the ULINE web지역 연락처 사이트.
When contacting support, please have your product model number (B004SIPL18) and purchase details ready.
