1. 서론
The Seco-Larm Enforcer SD-9263-KSVQ is an outdoor-rated, no-touch request-to-exit plate designed for controlled access systems. It utilizes infrared (IR) technology to detect hand waves, activating a door release without physical contact. This unit is ideal for environments requiring high hygiene standards. It also features a mechanical override for emergency or power failure situations.
2. 주요 특징
- No-Touch Activation: Activates with a simple wave of the hand, minimizing contact.
- Adjustable Sensor Range: Detection range can be set from 2 to 7 inches (5 to 18 cm).
- 시각적 피드백: A ring illuminator changes color (red to green or green to red, selectable) upon activation.
- 기계적 오버라이드: Includes a manual button for door operation, even during power outag에스.
- 내구성 있는 구조: Made from stainless steel with an IP65 weatherproof rating for outdoor use.
- 간편한 배선: Features a quick-connect screwless terminal block for simplified installation.
- Adjustable Trigger Duration: Output relay trigger duration is adjustable from 0.5 to 20 seconds, or set to toggle mode.
3. 설정 및 설치
Proper installation is crucial for the optimal performance and longevity of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. This device is designed for door mount applications.
3.1 패키지 내용
- Seco-Larm Enforcer No Touch Request-to-Exit Plate (SD-9263-KSVQ)
- 장착 하드웨어
- Keys for mechanical override
3.2 장착
- Select a suitable location on the door frame or wall adjacent to the door, ensuring it is within easy reach for users.
- Use the provided mounting hardware to securely attach the plate. Ensure the plate is level and firmly fixed to prevent movement.
- Route necessary wiring through the wall or door frame to the quick-connect terminal block on the back of the plate.
3.3 배선
Connect the plate to your access control system or door strike using the screwless terminal block. Refer to your access control system's manual for specific wiring diagrams. The plate includes a 1A relay output.
- 전원 입력: Connect to a stable power source (typically 12V DC).
- 릴레이 출력: Connect to the door strike or access control panel's input.
- 지면: Ensure proper grounding for safe operation.
Note: All wiring should be performed by a qualified technician in accordance with local electrical codes.
그림 1: 앞쪽 view of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. It features a brushed stainless steel finish, an illuminated IR sensor with a hand icon, and a mechanical override button. Text on the plate indicates 'WAVE TO OPEN' and 'ENFORCER'.
4. 사용 설명서
4.1 No-Touch Activation
- Approach the Seco-Larm Enforcer plate.
- Wave your hand within the adjustable sensor range (2 to 7 inches) of the IR sensor.
- The ring illuminator will change color (e.g., from red to green) to indicate successful activation.
- The door will unlock or open according to the configured trigger duration.
4.2 Mechanical Override
In the event of a power failure or if no-touch activation is not desired, the mechanical override can be used.
- Locate the manual override button on the plate.
- Press the button to activate the door release mechanism.
4.3 Adjusting Sensor Range and Trigger Duration
The sensor range and trigger duration can be adjusted via internal potentiometers or dip switches (refer to the detailed wiring diagram provided with the product for exact locations and procedures).
- 센서 범위 : Adjust to suit the environment, typically between 2 and 7 inches. Avoid setting it too sensitive in high-traffic areas to prevent false activations.
- 트리거 기간: Set the time the relay remains active (0.5 to 20 seconds) or select toggle mode for continuous activation until a second wave.
5. 유지관리
The Seco-Larm Enforcer No Touch Request-to-Exit Plate requires minimal maintenance due to its durable stainless steel construction and IP65 rating.
- 청소: Periodically wipe the surface with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or sensor.
- 점검: Regularly check for any signs of physical damage or loose connections. Ensure the mounting remains secure.
- 센서 성능: Test the no-touch activation periodically to ensure the sensor is functioning correctly and its range is appropriate for the environment.
6. 문제 해결
If you encounter issues with your Seco-Larm Enforcer No Touch Request-to-Exit Plate, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No-touch activation not working |
|
|
| Illuminator not changing color |
|
|
| Door does not unlock after activation |
|
|
| Mechanical override not working |
|
|
7. 사양
- 모델: SD-9263-KSVQ
- 재료: 스테인리스 스틸
- 치수: 4.53 x 2.76 x 0.4인치(115 x 70 x 10mm)
- 품목 무게: 4.8 온스(136그램)
- 센서 유형: 적외선 (IR)
- 센서 범위 : Adjustable 2 to 7 inches (5 to 18 cm)
- 릴레이 출력: 1A
- 트리거 기간: Adjustable 0.5 to 20 seconds or Toggle
- 비바람에 견디는 등급 : IP65
- 장착 유형: 도어 마운트
- 포함된 구성 요소: Light (illuminator)
8. 보증 및 지원
8.1 보증 정보
This Seco-Larm Enforcer product is covered by a 1년 한정 보증 구매일로부터 유효합니다. 본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 단, 오용, 사고, 무단 개조 또는 부적절한 설치로 인한 손상은 보증 대상에서 제외됩니다.
8.2 기술 지원
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Seco-Larm customer support. Have your product model number (SD-9263-KSVQ) and date of purchase ready when contacting support.
Please visit the official Seco-Larm web최신 연락처 정보와 지원 리소스를 제공하는 사이트입니다.
