소개
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Technoline WS 9136-IT Weather Station. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
제품 끝view
The Technoline WS 9136-IT is a versatile weather station designed to provide accurate indoor and outdoor temperature readings, along with weather forecasts and a radio-controlled clock. It features a clear display and user-friendly controls.
This image shows the Technoline WS 9136-IT Weather Station. The display features the current time (12:34), a DCF signal indicator, a weather forecast icon (partly cloudy), indoor temperature (23.5°C) with max/min values (25°C/18°C), and outdoor temperature (10.3°C) with max/min values (17°C/6°C). Buttons for 'SET', 'ALARM', 'MIN/MAX', and 'RESET' are visible below the display.
주요 특징:
- DCF-77 Radio-Controlled Clock with manual setting option
- 실내 및 실외 온도 디스플레이
- Min/Max Temperature Memory
- Weather Forecast and Trend Display
- Alarm with Snooze Function
- 배터리 충전 레벨 표시기
- Wall-Mount or Tabletop Use
- Includes Wireless Outdoor Sensor
설정
1. 배터리 설치:
- Open the battery compartment on the back of the main unit and the outdoor sensor.
- 필요한 배터리(일반적으로 AA 또는 AAA, 기기 표시 참조)를 삽입할 때 극성(+/-)을 올바르게 맞춰주세요.
- 배터리함을 단단히 닫으십시오.
2. 센서 배치:
- Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings.
- Ensure the sensor is within the effective transmission range (868 MHz) of the main unit, typically up to 30 meters in open air. Walls and obstacles may reduce this range.
3. 초기 동기화:
- After battery installation, the main unit will automatically begin searching for the DCF-77 radio signal for time synchronization and the outdoor sensor signal.
- This process may take several minutes. Ensure the unit is placed away from potential interference sources like electronic devices.
- Once synchronized, the time and outdoor temperature will appear on the display.
작업
1. 시간 설정 :
- 오토매틱: The clock automatically synchronizes with the DCF-77 signal. A signal icon will indicate successful reception.
- 수동 : If the DCF signal is unavailable, you can manually set the time using the 'SET' button. Press and hold 'SET' to enter time setting mode, then use other buttons (e.g., 'ALARM' or 'MIN/MAX') to adjust values and 'SET' to confirm.
2. 온도 디스플레이:
- The display shows current indoor and outdoor temperatures.
- 'MIN/MAX' 버튼을 누르세요 view the recorded minimum and maximum temperatures for both indoor and outdoor environments. Press again to cycle through current, minimum, and maximum values.
- To reset the Min/Max memory, press and hold the 'MIN/MAX' button while the minimum or maximum values are displayed.
3. 일기예보:
- The weather station predicts weather conditions for the next 12-24 hours based on atmospheric pressure changes.
- Icons such as sunny, partly cloudy, cloudy, or rainy will be displayed. Note that these are forecasts and may not always perfectly match current conditions.
4. Alarm Function:
- '알람' 버튼을 누르세요 view 알람 시간.
- Press and hold 'ALARM' to enter alarm setting mode. Use other buttons to adjust the hour and minute, and 'ALARM' to confirm.
- To activate/deactivate the alarm, press the 'ALARM' button briefly when the alarm time is displayed. An alarm icon will appear when active.
- When the alarm sounds, press any button (except 'RESET') to activate the snooze function. The alarm will sound again after approximately 5 minutes. Press 'RESET' to turn off the alarm completely.
유지
1. 배터리 교체:
- When the battery indicator appears on the display, replace the batteries in both the main unit and the outdoor sensor promptly.
- 항상 모든 배터리를 동일한 유형의 새 배터리로 동시에 교체하세요.
2. 청소:
- 부드러운 천으로 유닛과 센서를 청소하세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- Ensure no water enters the battery compartments or other openings.
문제 해결
일반적인 문제 및 해결책:
- No outdoor temperature display:
해결책: Check batteries in the outdoor sensor. Ensure the sensor is within range and not blocked by thick walls or interference. Try re-synchronizing by removing and reinserting batteries in both units. - Time not synchronizing (DCF-77):
해결책: Ensure the unit is placed in an area with good radio signal reception, away from electronic devices. The synchronization process can take several minutes, especially during initial setup or after battery replacement. Manual time setting is an alternative. - 부정확한 온도 측정:
해결책: For outdoor sensor, ensure it is not in direct sunlight or exposed to heat sources. For indoor unit, ensure it is not near windows, heating vents, or direct sunlight. - 디스플레이가 어둡거나 비어 있음:
해결책: 본체의 배터리를 교체하세요.
명세서
- 모델 번호: WS9136
- 치수(길이 x 너비 x 높이): 12.4 x 2.9 x 13cm
- 무게: 158그램
- 전원: 배터리 구동
- 연결 기술 : 868MHz (실외 센서용)
- 재료: 플라스틱
- 색상: Transparent/Silver
보증 및 지원
The Technoline WS 9136-IT Weather Station comes with a 2년 보증 구매일로부터. 보증 청구를 위해 구매 증빙을 보관하세요.
For technical support or further assistance, please refer to the manufacturer's official web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 web대지.
