1. 소개 및 이상view
The Tetra WP Aquarium Water Pump is designed to provide efficient water circulation for aquariums ranging from 80 to 200 liters. This powerful, submersible pump features an adjustable flow system, ensuring optimal water movement for a healthy aquatic environment. Its compact design allows for easy placement and quiet operation, making it an ideal choice for maintaining water quality.
주요 특징은 다음과 같습니다.
- Powerful Impeller System: Delivers high water flow for effective circulation.
- 조정가능한 흐름율: Allows precise control over water movement to suit your aquarium's needs.
- 완전 잠수정: 물에 완전히 잠길 수 있도록 설계되었습니다.
- 조용한 작동: Engineered to run silently, minimizing disturbance.
- 간편한 설치 및 유지 관리: Simple setup and straightforward cleaning procedures.
2. 안전 지침
Before operating the Tetra WP Aquarium Water Pump, please read and understand all safety instructions to prevent injury or damage to the product or your aquarium. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- 펌프의 유지보수, 설치 또는 제거 작업을 하기 전에 항상 전원을 차단하십시오.
- 전원 플러그를 만질 때는 손이 건조한지 확인하십시오.
- The pump is designed for indoor use only and must be fully submerged in water during operation.
- 전원 코드나 플러그가 손상된 경우 펌프를 작동하지 마십시오.
- 이 설명서에 명시된 용도 이외의 목적으로 펌프를 사용하지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 볼륨을 확보하세요tage indicated on the pump matches your local power supply.
3. 패키지 내용
상자를 조심스럽게 열고 모든 물품이 있는지, 그리고 양호한 상태인지 확인하십시오. 패키지에는 다음이 포함되어야 합니다.
- 1 x Tetra WP Aquarium Water Pump (Model WP 600)
Note: Additional tubing or accessories may need to be purchased separately depending on your specific aquarium setup.
4. 설정
Follow these steps for proper installation of your Tetra WP Aquarium Water Pump:
- 펌프를 준비하세요: Ensure the pump is clean and free from any debris.
- 위치: Place the pump fully submerged inside your aquarium. The pump is equipped with suction cups for secure attachment to the aquarium glass. Ensure it is positioned where it can effectively circulate water without being obstructed by decorations or substrate.
- Connect Tubing (Optional): If you are using the pump to drive a filter or other accessory, connect the appropriate tubing to the pump's outlet nozzle.
- 유량 조정: Locate the flow adjustment slider on the pump. Set it to the desired water flow intensity. Start with a moderate setting and adjust as needed after observing your aquarium's water movement.
- 전원 연결: Once the pump is securely placed and fully submerged, connect the power plug to a suitable electrical outlet.
5. 운영
Once installed, operating the Tetra WP pump is straightforward:
- 전원 켜기: Plug the pump into a power outlet. The pump will start immediately.
- 흐름 조정: Use the green slider on the front of the pump to increase or decrease the water flow. Adjust it to achieve the desired current for your fish and plants.
- 연속 작업: The pump is designed for continuous operation. Monitor your aquarium's water parameters and fish behavior to ensure optimal conditions.
6. 유지관리
Regular maintenance ensures the longevity and efficient performance of your pump. Always disconnect the power before performing any maintenance.
- 정기 청소: Periodically remove the pump from the aquarium. Disassemble the front cover and impeller housing. Clean the impeller and its chamber thoroughly to remove any accumulated debris, algae, or mineral deposits. A small brush can be helpful.
- 막힌 부분이 있는지 확인하세요. Inspect the intake grilles and outlet nozzle for any blockages that might impede water flow.
- 임펠러 검사: Check the impeller for any signs of wear or damage. A worn impeller can lead to reduced performance or increased noise.
- 재조립: Reassemble the pump carefully, ensuring all parts are correctly fitted.
For optimal aquarium health and filter performance, consider using products like Tetra FilterActive Bacteria after filter changes, filter cleaning, or water changes. This helps maintain biological activity and extends the interval between cleanings.
7. 문제 해결
If you encounter issues with your Tetra WP pump, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | No power; Impeller jammed; Airlock | Check power connection; Disconnect and clean impeller; Ensure pump is fully submerged and free of air bubbles. |
| 물의 흐름이 감소함 | Clogged intake/outlet; Dirty impeller; Flow rate set too low | Clean intake grilles and outlet; Clean impeller; Adjust flow slider to a higher setting. |
| 펌프가 시끄럽거나 진동합니다 | Impeller dirty or damaged; Improper seating of components; Air trapped in pump | Disconnect and clean impeller; Ensure all parts are correctly assembled; Gently shake pump to release trapped air; Check for worn impeller. |
| 펌프가 간헐적으로 정지함 | Overheating; Loose connection; Impeller obstruction | Ensure pump is fully submerged; Check power connection; Clean impeller for obstructions. |
8. 사양
Detailed technical specifications for the Tetra WP 600 Aquarium Water Pump:
| 특징 | 사양 |
|---|---|
| 모델 | WP 600 |
| 적합한 수조 크기 | 80~200리터 |
| 최대 유량 | 시간당 600리터(l/h) |
| 전력 소비 | 11 와트 |
| 최대 배송 높이 | 1.3 meters (m) |
| Maximum Immersion Height | 1 meter (m) |
| 크기(대략) | 높이: 80mm, 깊이: 70mm, 너비: 50mm |
| 재료 | 금속(내부 부품), 플라스틱(외장) |
| 전원 | 케이블이 있는 전기 |
| GTIN(국제 무역 품목 번호) | 04004218188785 |
| ASIN | B004AWF0TA |
| 원산지 | 이탈리아 |
9. 보증 및 지원
The Tetra WP Aquarium Water Pump comes with a 2년 보증 구매일로부터 제조상의 결함에 대한 보증을 제공합니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주세요.
For returns or issues with defective/damaged products, please refer to the retailer's return policy or contact their customer support directly. For specific information regarding purchases made on marketplaces, consult their respective help pages.
For technical support or further inquiries about your Tetra product, please visit the official Tetra web사이트 또는 고객 서비스 부서에 문의하십시오.
