소개
This instruction manual provides essential information for the proper installation, function, and maintenance of the Dorman 700365 Auto Part. This component is designed as a direct replacement engine oil drain plug for specific automotive applications. Please read this manual thoroughly before proceeding with installation or use to ensure safety and optimal performance.
제품 끝view
The Dorman 700365 is an automotive replacement part, specifically an engine oil drain plug. Its primary function is to seal the oil pan, preventing oil leaks, and to allow for controlled drainage of engine oil during maintenance procedures. This part is engineered to meet or exceed original equipment specifications for fit, form, and function.
Image showing the Dorman 700365 Auto Part, which is an engine oil drain plug. It features a threaded shaft with a conical tip and a flat head for installation.
설치
안전이 최우선입니다. Always ensure the vehicle is safely supported on jack stands or a lift. Allow the engine to cool before working with hot oil. Wear appropriate personal protective equipment, including gloves and eye protection.
- 차량 준비: Park the vehicle on a level surface and engage the parking brake. Place a suitable oil drain pan beneath the engine's oil pan.
- 배수 플러그 찾기: Identify the existing oil drain plug on the bottom of the oil pan.
- 기존 플러그를 제거하세요: Using the correct wrench, carefully loosen and remove the old drain plug. Allow all engine oil to drain completely into the pan.
- 검사 및 청소: Inspect the oil pan's drain plug threads for any damage. Clean the area around the drain hole.
- 새 플러그를 설치하세요: Ensure the Dorman 700365 drain plug has a new crush washer or gasket (if applicable). Thread the new drain plug into the oil pan by hand to prevent cross-threading.
- 사양에 따른 토크: Using a torque wrench, tighten the drain plug to the vehicle manufacturer's specified torque setting. 너무 조이지 마세요, as this can damage the oil pan threads.
- 오일 보충: Refill the engine with the correct type and amount of new engine oil as specified by the vehicle manufacturer.
- 누출 확인: Start the engine and allow it to run for a few minutes. Turn off the engine and carefully check around the new drain plug for any signs of oil leaks.
If you are unsure about any step, it is recommended to consult a qualified automotive technician or refer to your vehicle's service manual.
기능 및 작동
Once properly installed, the Dorman 700365 Auto Part functions as a critical seal for the engine's oil pan. It securely retains engine oil within the lubrication system, preventing leaks and maintaining proper oil levels. During routine oil changes, the plug is removed to allow old oil to drain, and then reinstalled to seal the pan for the new oil. Its design ensures a tight seal when torqued correctly, contributing to the overall health and efficiency of the engine.
유지
- 정기 검사: During every oil change, visually inspect the drain plug and the surrounding area of the oil pan for any signs of leaks, cracks, or damage.
- Gasket/Washer Replacement: It is highly recommended to replace the crush washer or gasket every time the oil drain plug is removed. This ensures a proper seal and prevents leaks.
- 적절한 토크: Always ensure the drain plug is tightened to the vehicle manufacturer's specified torque. Overtightening can strip threads, while undertightening can lead to leaks.
- 청결: Keep the drain plug and oil pan area clean to easily spot any potential leaks.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 오일 드레인 플러그에서 오일 누출 |
|
|
| Difficulty Removing/Installing Plug |
|
|
문제가 지속될 경우 전문 자동차 정비사에게 문의하십시오.
명세서
- 상표: 도르만
- 모델 번호: 700365
- 부품 유형: Engine Oil Drain Plug
- ASIN: B0049DPSN8
- 첫 이용 가능 날짜: 29년 2022월 XNUMX일
- 호환성: Refer to vehicle manufacturer's specifications for proper fitment.
보증 및 지원
Dorman products are manufactured to high-quality standards. For specific warranty information, please refer to the official Dorman web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
기술 지원이나 추가 문의 사항은 다음 웹사이트를 방문하십시오. 도르만 프로덕츠 web대지 또는 고객 서비스 부서에 문의하세요.
