인텔 D425KT 이노베이션 시리즈 마더보드 사용 설명서

소개

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Intel D425KT Innovation Series Motherboard. Designed with an integrated Intel Atom D425 Processor and Intel NM10 Express Chipset, this mini-ITX motherboard offers a compact and energy-efficient computing solution. Please read this manual thoroughly before proceeding with installation or operation.

그림 1: Intel D425KT Motherboard and its retail packaging. The image displays the compact mini-ITX form factor motherboard alongside its blue and black box, highlighting the Intel Atom processor branding.

1. 설정 및 설치

Before beginning installation, ensure you have a clean, static-free workspace. It is recommended to wear an anti-static wrist strap to prevent damage to components.

1.1. 패키지 내용물 확인

Verify that all components listed in your product's packing list are present. Typically, this includes the Intel D425KT motherboard, I/O shield, SATA cables, and documentation.

1.2. 구성요소 종료view

그림 2: 위에서 아래로 view of the Intel D425KT Motherboard. This image provides a clear layout of the motherboard, showing the integrated Atom processor heatsink, memory slots, SATA ports, and various headers for system connections.

1.3. 메모리 설치

The Intel D425KT uses DDR3 SO-DIMM (notebook) memory. Locate the memory slot(s) on the motherboard. Gently push down the clips at each end of the slot. Align the notch on the memory module with the key in the slot. Insert the module firmly until the clips snap into place, securing the module.

1.4. 전원 연결

Connect the 24-pin ATX main power connector from your power supply to the corresponding port on the motherboard. Additionally, connect the 4-pin P4 CPU power cable to the designated connector near the CPU socket.

1.5. 저장 장치 연결

Connect your SATA storage devices (hard drives, SSDs) to the SATA ports on the motherboard using SATA data cables. Ensure the power cables from your power supply are also connected to these devices.

1.6. 전면 패널 연결

Connect the front panel cables from your computer case (Power LED, HDD LED, Power Switch, Reset Switch, USB ports, Audio ports) to their respective headers on the motherboard. Refer to the motherboard's silkscreen labels for correct pin alignment.

1.7. 후면 패널 연결

Install the I/O shield into your computer case. Connect your peripherals (keyboard, mouse, monitor, network cable, audio devices) to the appropriate ports on the motherboard's rear I/O panel.

그림 3: Rear I/O ports of the Intel D425KT Motherboard. This image clearly shows the various connectivity options available at the back of the motherboard, including PS/2 ports, serial ports, VGA, USB, Ethernet, and audio jacks.

2. 사용 설명서

2.1. 첫 번째 부팅

After all connections are secure, connect the power cord to your power supply and turn on the system. The system should power on, and you should see the BIOS POST screen on your monitor.

2.2. BIOS/UEFI 설정

During the POST sequence, press the designated key (usually 델 or F2) to enter the BIOS setup utility. Here you can configure boot order, system time, and other hardware settings. Save and exit the BIOS after making any changes.

2.3. 운영체제 설치

Insert your operating system installation media (USB drive or CD/DVD) and follow the on-screen prompts to install your preferred operating system. Ensure the boot order in BIOS is set to prioritize your installation media.

2.4. 드라이버 설치

After the operating system is installed, install the necessary drivers for the motherboard's components (chipset, audio, LAN, graphics). These drivers are typically provided on a CD/DVD included with the motherboard or can be downloaded from the Intel support web대지.

3. 유지관리

3.1. 청소

Regularly clean the interior of your computer case to prevent dust buildup, which can lead to overheating. Use compressed air to gently remove dust from the motherboard, heatsinks, and fans. Ensure the system is powered off and unplugged before cleaning.

3.2. BIOS 업데이트

인텔 지원 정보를 주기적으로 확인하세요. website for updated BIOS versions. BIOS updates can improve system stability, compatibility, and performance. Follow the instructions provided by Intel carefully when performing a BIOS update.

3.3. 환경 고려 사항

Operate the motherboard in a well-ventilated environment with stable temperature and humidity. Avoid exposing the system to extreme temperatures, direct sunlight, or excessive moisture.

4. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대한 해결책을 제공합니다.

4.1. 힘이 없다

• Check all power connections: 24-pin ATX, 4-pin P4, and power supply cable to wall outlet.
• 전원 공급 스위치가 'ON' 위치에 있는지 확인하세요.
• 다른 시스템이나 전원 공급 장치 테스터를 사용하여 전원 공급 장치를 테스트하십시오.

4.2. 디스플레이 없음

• Verify the monitor is connected to the correct video output port (VGA on this motherboard) and is powered on.
• Reseat the memory modules. Incorrectly seated RAM is a common cause of no display.
• Clear the CMOS by removing the CMOS battery for 30 seconds or using the clear CMOS jumper (refer to motherboard diagram for location).

4.3. 시스템 불안정/충돌

• 모든 드라이버가 올바르게 설치되고 최신 상태인지 확인하세요.
• Check CPU and chipset temperatures using monitoring software. Ensure adequate cooling.
• 메모리 진단 도구를 실행하여 RAM에 오류가 있는지 확인하십시오.
• Verify hard drive health.

5. 사양

Below are the key technical specifications for the Intel D425KT Motherboard:

6. 보증 및 지원

6.1. 보증 정보

Intel products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your Intel D425KT motherboard, please refer to the warranty card included with your product or visit the official Intel support web대지.

6.2. 기술 지원

For technical assistance, driver downloads, or further information, please visit the official Intel support web대지:

Intel Support for Motherboards

When contacting support, please have your product model (BOXD425KT) and serial number ready.