1. 서론
그만큼 AMP Research PowerStep is an automatic, electric-powered running board designed to provide convenient and safe access to your truck. It extends instantly when the vehicle door is opened and retracts out of sight when the doors close, offering improved ground clearance, aerodynamics, and a clean appearance. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PowerStep system.
주요 특징:
- Automatic Deployment: Steps extend and retract automatically with door operation.
- 견고한 구조: Features die-cast aluminum alloy components and precision stainless steel pivot pins for stability.
- 높은 하중 용량: 6-inch wide, cab-length step boards capable of supporting a 600 lb. load.
- 강화된 안전성: Textured, slip-resistant stepping surface, onboard LED lighting, and 'Anti-Pinch' technology.
- 차량별 호환성: Designed for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax models.
2. 설정 및 설치
그만큼 AMP Research PowerStep is engineered for straightforward installation. For detailed, step-by-step instructions specific to your vehicle model, please refer to the official 설치 설명서(PDF). This section provides a general overview.
설치 전 고려사항:
- Ensure you have all components listed in the packing list.
- Basic tools are required. Some installations may require drilling small hole(s).
- Verify vehicle compatibility (2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax).
일반 설치 단계:
- Review the complete installation manual before beginning.
- Mount the PowerStep linkage assemblies to the vehicle's frame.
- Attach the step boards to the linkage assemblies.
- Install the control module and connect the wiring harness to the vehicle's electrical system.
- Connect the LED step lights.
- Test the operation of the PowerSteps to ensure proper deployment and retraction.
이미지: AMP Research PowerStep running boards, ready for installation.
Image: A person demonstrating the ease of entry into a truck with the PowerStep deployed.
3. 운영
그만큼 AMP Research PowerStep system is designed for intuitive, automatic operation, requiring no manual intervention once installed correctly.
Automatic Deployment and Retraction:
- When a vehicle door is opened, the PowerStep will automatically deploy within approximately one second, providing a convenient step.
- When all vehicle doors are closed, the PowerStep will retract and stow itself discreetly under the vehicle, typically within three seconds.
- The integrated LED lights illuminate the step area upon deployment for enhanced visibility in low-light conditions.
- The 'Anti-Pinch' technology is designed to detect obstructions during retraction and will stop the step's movement to prevent injury or damage.
이미지: 클로즈업 view highlighting the textured, slip-resistant surface of the PowerStep, ensuring secure footing.
4. 유지관리
정기적인 유지관리는 제품의 수명과 최적의 성능을 보장합니다. AMP Research PowerStep.
청소:
- Periodically clean the step surface and the linkage mechanisms to remove dirt, mud, salt, or other debris.
- Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- 깨끗한 물로 깨끗이 헹구세요.
점검:
- Inspect the pivot points and moving parts for any signs of wear or damage.
- Ensure all fasteners are secure. Do not overtighten.
- Check the wiring for any fraying or exposed sections.
- Lubricate the pivot points with a silicone-based lubricant as needed, especially in harsh weather conditions.
5. 문제 해결
If you encounter issues with your PowerStep, refer to the table below for common problems and their potential solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Steps do not deploy or retract. | Power supply issue, loose wiring, motor malfunction, or obstruction. | Check vehicle's fuse box. Inspect all wiring connections for tightness and corrosion. Remove any obstructions. If problem persists, consult the full installation manual or professional assistance. |
| Steps are noisy during operation. | Lack of lubrication, dirt/debris in mechanism. | Clean the linkage mechanisms thoroughly. Apply a silicone-based lubricant to all pivot points. |
| LED 조명이 작동하지 않습니다. | Loose connection, damaged wiring, or faulty LED. | Check the wiring connections to the LED lights. Inspect for any visible damage to the light strips. |
| Steps deploy unevenly or are crooked. | Improper installation, loose mounting hardware, or damaged linkage. | Re-check mounting hardware for proper torque. Ensure the linkage arms are not bent or damaged. Refer to the installation manual for correct alignment. |
이미지: 밑면 view of the PowerStep, illustrating the low-profile LED lighting and robust construction.
6. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | AMP 연구 |
| 모델 번호 | 75137-01A |
| 재료 | 알류미늄 |
| 색상 | 검은색 |
| 외부 마감 | 그린 |
| 품목 치수(L x W x H) | 8 x 81 x 13 인치 |
| 품목 무게 | 45 파운드 |
| 중량 제한 | 600 파운드 |
| 한국어: | 815410010347 |
| 차량 서비스 유형 | Truck (Specifically 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax) |
7. 보증 및 지원
보증 정보:
AMP Research stands behind its products with a hassle-free, comprehensive 5-year/60,000-mile warranty. 본 보증은 정상적인 사용 환경에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.
고객 지원:
For further assistance, technical support, or warranty claims, please contact AMP Research customer service. You may also find additional resources and FAQs on the official AMP 연구 web대지.
For the complete installation guide and other documentation, please refer to the official user guide PDF.
