소개
This manual provides instructions for the installation, operation, and maintenance of the Altronix OLS120 Power Supply/Charger. The OLS120 is designed to provide regulated 12VDC or 24VDC power at 4 amps, with integrated AC and battery monitoring capabilities, utilizing a 115VAC input.
중요 안전 지침
- 설치 및 서비스는 자격을 갖춘 서비스 담당자만 수행해야 합니다.
- To reduce the risk of electric shock, disconnect AC power before servicing.
- 과열을 방지하려면 적절한 환기를 유지하세요.
- 본 제품을 비나 습기에 노출시키지 마십시오.
- Use only recommended battery types for backup power.
제품 끝view
The Altronix OLS120 is a robust power supply/charger unit engineered for reliable performance in various applications requiring stable DC power and battery backup.
주요 특징
- Selectable 12VDC or 24VDC output.
- 4 amp continuous supply current.
- Integrated AC and battery monitoring.
- 115VAC input for power.
구성 요소 식별
This image displays the Altronix OLS120 circuit board, highlighting various components essential for its operation. Familiarize yourself with these components before installation.
주요 구성 요소:
- 권tage 선택기 스위치: Located at the top right, labeled "OFF 24VDC ON 12VDC". This switch allows selection between 12VDC and 24VDC output.
- AC Input Terminals: Positioned at the bottom left, marked for 115VAC input connections.
- DC 출력 단자: Located at the bottom right, these terminals are for connecting devices that require 12VDC or 24VDC power.
- 배터리 단자: Found at the bottom right, near the PTCs, for connecting backup batteries.
- AC Fail Indicator (LED): An LED near the "AC FAL" label, which illuminates upon loss of AC power.
- Low Battery Indicator (LED): An LED near the "LOW BAT" label, indicating a low battery condition.
- 변신 로봇: A central component, often labeled with part numbers like "P POL-30030", responsible for stepping down the AC voltage.
- 커패시터: Large cylindrical components (e.g., "C2", "C29A") used for filtering and energy storage.
- Fuses/PTCs: Overcurrent protection devices (e.g., "PTC1", "PTC2") to safeguard the circuit.
설정 및 설치
1단계: 장착
Securely mount the OLS120 in a suitable enclosure or location, ensuring adequate ventilation to prevent heat buildup.
2단계: 볼륨tage 선택
볼륨 찾기tage selector switch (labeled "OFF 24VDC ON 12VDC") on the circuit board. Set the switch to the desired output voltage (12VDC or 24VDC) before connecting any power.
Step 3: AC Power Connection
Connect the 115VAC input power to the designated AC input terminals. Ensure proper polarity and secure connections. Refer to local electrical codes for wiring practices.
Step 4: DC Output Connection
Connect your devices requiring DC power to the DC output terminals. Observe correct polarity to prevent damage to the connected equipment.
Step 5: Battery Connection (Optional)
For battery backup functionality, connect a suitable rechargeable battery to the battery terminals. Ensure correct polarity. The OLS120 will charge the battery and automatically switch to battery power upon AC failure.
작업
전원 켜기
Once all connections are secure and verified, apply 115VAC power to the unit. The unit will power on and begin providing regulated DC output.
상태 표시기
- AC Fail (LED): This indicator illuminates when the AC input power is lost, signaling that the unit is operating on battery backup (if connected).
- Low Bat (LED): This indicator illuminates when the connected battery voltage drops below a pre-set threshold, indicating that the battery requires charging or replacement.
유지
일반 관리
Keep the unit clean and free from dust accumulation. Ensure that all ventilation openings are not obstructed to maintain optimal operating temperature.
배터리 유지 관리
If a backup battery is used, periodically check its condition and charge level. Replace the battery as recommended by the battery manufacturer or when its performance degrades.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| DC 출력 없음 | AC 입력 전원 없음 | AC 전원 및 연결 상태를 확인하십시오. |
| DC 출력 없음 | 잘못된 볼륨tage 선택 | 볼륨 확인tage selector switch is set correctly (12VDC or 24VDC). |
| AC Fail LED On | Loss of AC power | Restore AC power. |
| Low Bat LED On | 배터리가 방전되었거나 결함이 있음 | Check battery charge and condition; replace if necessary. |
| 간헐적 출력 | 느슨한 연결 | 모든 배선 연결을 보호하세요. |
For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact Altronix technical support for further assistance.
명세서
- 제품 크기: 8.4 x 5.7 x 2.9 인치
- 품목 무게: 1.2파운드
- 출력 볼륨tage: 12VDC 또는 24VDC (선택 가능)
- 출력 전류: 4 amp
- 입력 Voltage: 115VAC
- 제조업체: 알트로닉스
- 모델 번호: 올스120D2X
- 첫 이용 가능 날짜: 31년 2010월 XNUMX일
보증 및 기술 지원
Altronix products are backed by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the official Altronix web사이트 또는 구매 시 포함된 문서를 참조하세요.
For technical assistance, product inquiries, or support, please contact Altronix customer service directly. Contact information can typically be found on the manufacturer's web대지.
Manufacturer: Altronix Corp.
