Klipsch Synergy S-10 Premium WDST Surround Speakers User Manual

1. 서론

The Klipsch Synergy S-10 Premium WDST Surround Speakers are designed to enhance your home audio experience by providing precise and enveloping sound effects. Utilizing Klipsch's Wide Dispersion Surround Technology (WDST), these speakers aim to immerse the listener in audio content while offering flexible placement options. This manual provides essential information for the setup, operation, and maintenance of your S-10 speakers.

이미지 1.1: 앞면 view of the Klipsch Synergy S-10 Premium WDST Surround Speaker, showcasing its black ash vinyl finish and dual tweeters.

2. 특징

The Synergy S-10 speakers incorporate several design elements for optimal audio performance:

• WDST Surround Technology: Provides wide sound dispersion for an immersive listening experience and flexible speaker placement.
• 음향 부품: Features a 4-inch Injection Molded Graphite (IMG) woofer and dual 0.75-inch aluminum diaphragm compression drivers.
• Tractrix Horns: The compression drivers are mated to 90°x60° square Tractrix Horns, designed for superior clarity and dynamic sound.
• 캐비닛 디자인: Constructed with a black ash vinyl finish and high-gloss black accents, offering a sleek aesthetic.
• 벽면 장착: Includes an integrated keyhole bracket on the rear panel for easy wall installation.
• Linear Travel Suspension: Minimizes distortion for clear high frequencies.

3. 설정 및 설치

Proper setup is crucial for achieving the best sound performance from your Klipsch Synergy S-10 speakers.

3.1 배치

• The S-10 speakers are designed as surround sound speakers. Position them to the sides or slightly behind your primary listening area.
• Due to WDST technology, these speakers offer flexibility in placement, allowing for effective sound dispersion even in varied room layouts.
• For optimal effect, ensure the speakers are placed at approximately ear level when seated, or slightly above if wall-mounted.

3.2 벽면 장착

The S-10 speakers feature an integrated keyhole bracket for wall mounting.

1. Identify a suitable location on the wall, considering speaker placement guidelines.
2. Securely fasten a screw (not included) into the wall, ensuring it can support the speaker's weight (5 lbs / 2.3 kg). Use appropriate wall anchors if mounting into drywall.
3. Align the keyhole bracket on the back of the speaker with the screw head and slide the speaker down to secure it.

3.3 배선 연결

스피커를 오디오 수신기에 연결하거나 amp스피커선을 이용한 리퍼.

• The S-10 speakers use single binding posts for connection.
• Ensure that the positive (+) terminal on the speaker is connected to the positive (+) terminal on your amp앰프의 음극(-) 단자를 전원 어댑터의 음극(-) 단자에 연결하십시오. amp앰프. 극성이 잘못되면 음질이 저하될 수 있습니다.
• 스피커 케이블은 길이에 맞는 굵기의 고품질 제품을 사용하십시오.

4. 운영

Once properly set up, your Klipsch Synergy S-10 speakers are ready for use.

• These speakers are designed to function as surround channels in a multi-channel home theater system (e.g., 5.1, 7.1).
• Ensure your audio receiver is configured to recognize and utilize surround speakers. Refer to your receiver's manual for specific settings.
• The S-10 speakers are rated for 50 W RMS / 200 W Peak power handling and have an impedance of 8 ohms. Ensure your amplifier의 출력은 이러한 사양과 일치하여 손상을 방지합니다.
• 낮은 볼륨으로 시작하여 듣기에 편안한 수준으로 점차 높이십시오.

5. 유지관리

To ensure the longevity and optimal performance of your Klipsch Synergy S-10 speakers, follow these simple maintenance guidelines:

• 청소: Dust the speaker cabinets regularly with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the finish.
• 배치 환경: Keep speakers away from direct sunlight, excessive heat, and moisture. Ensure adequate ventilation around the speakers.
• 그릴 : The speaker grilles protect the drivers. Handle them carefully if removed for cleaning or aesthetic preference.

6. 문제 해결

If you encounter issues with your Klipsch Synergy S-10 speakers, consider the following common troubleshooting steps:

• 소리 없음:
  • Verify all speaker wire connections are secure and correctly polarized (+ to + and - to -).
  • 확인하세요 amplifier/receiver settings to ensure the correct input and speaker channels are selected and enabled.
  • 확인하다 amp앰프 전원이 켜져 있고 보호 모드가 아닙니다.
• 왜곡된 소리:
  • 볼륨 레벨을 줄이세요 amp앰프. 스피커를 과도하게 구동하면 왜곡이 발생할 수 있습니다.
  • 스피커 배선 연결부에 느슨한 가닥이나 단락이 있는지 확인하십시오.
  • 확인하십시오 amplifier's power output is within the recommended range for the S-10 speakers.
• 고르지 못한 소리:
  • 청취 영역을 기준으로 스피커가 대칭적으로 배치되었는지 확인하십시오.
  • Verify balance settings on your amp리시버/리시버.

If these steps do not resolve the issue, consult your amplifier/receiver manual or contact Klipsch customer support.

7. 사양

Detailed technical specifications for the Klipsch Synergy S-10 speakers:

8. 보증 및 지원

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Klipsch web대지.

If you require technical assistance or have questions not covered in this manual, please contact Klipsch customer support through their official channels.