Scosche HA1710B Double DIN Radio Install Dash Kit Instruction Manual

1. 서론

This manual provides detailed instructions for installing the Scosche HA1710B Double DIN Radio Install Dash Kit. This kit is designed to facilitate the installation of an aftermarket car stereo into select 2001-05 Honda Civic vehicles, providing a factory-like appearance.

Please read all instructions carefully before beginning the installation process. Ensure all necessary tools and components are available.

2. 호환성

This dash kit is compatible with select 2001-05 혼다 시빅 models. It is not compatible with Civic Si 모델.

For specific compatibility, refer to the fit guide image below. This kit is designed for Double DIN installations only.

Image: Fit Guide for Scosche HA1710B Dash Kit. This guide illustrates vehicle compatibility, specifically noting that the kit works with 2001-05 Honda Civic DX, LX, and EX models, but is not for use with Civic Si models. It also indicates that it is for Double DIN installations only.

Scosche Double DIN Kits accommodate True Double DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Some radios labeled as Double DIN may be oversized, potentially requiring minor trimming of the kit for a proper fit.

Image: Industry Standard Sized Opening. This diagram provides the dimensions for the stereo opening in the dash kit, which are 96.8mm (3-13/16 inches) in height and 173mm (6-13/16 inches) in width. This is for reference to ensure your aftermarket stereo will fit.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Radio Bezel (Dash Kit)
• 사용 설명서
• Mounting Brackets (Left and Right)
• Hardware (screws, clips)

Image: Scosche HA1710B Dash Kit. This image displays the primary dash kit bezel, which frames the aftermarket stereo.

이미지: 각도 view of the Scosche HA1710B Dash Kit. This perspective highlights the design and mounting tabs of the dash kit bezel.

Image: Car Stereo Dash Kit Components. This image shows the dash kit along with representations of a wire harness and antenna adapter, noting that the latter two are sold separately.

4. 안전 정보

• 단락 및 감전을 방지하기 위해 전기 작업을 시작하기 전에 항상 차량 배터리의 음극 단자를 분리하십시오.
• 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
• 차량을 평평한 곳에 주차하고 주차 브레이크를 걸어 두세요.
• Refer to your vehicle's service manual for specific instructions on removing factory components.
• If you are unsure about any step, consult a qualified professional installer.

5. 설치

다음 영상은 포괄적인 개요를 제공합니다.view of the installation process, from preparation to final testing. Detailed steps are also provided below.

5.1. 준비

1. 배터리 분리: 차량 배터리의 음극 단자를 분리하십시오.
2. Review 지침: Read through the entire instruction manual provided with the dash kit and your new stereo.
3. Identify Tabs: 다시 후viewing the instructions, identify and remove any tabs on the dash kit components that are not required for your specific application.

5.2. Factory Radio Removal

4. Remove Trim Panels: Using a panel removal tool, carefully pry off and remove any trim panels surrounding your factory stereo.
5. Unscrew Factory Radio: Locate and unscrew the mounting screws holding the factory radio in place.
6. Unplug Harnesses: Gently pull out the factory radio and unplug all electrical harnesses and antenna cables from the back.

5.3. 배선 연결

Connect the aftermarket stereo's wiring harness to the vehicle's wiring harness. Match wire colors according to the instructions provided with your aftermarket stereo and the Scosche wiring adapter (if purchased separately).

• Use splice connectors or solder connections for secure and reliable electrical contact.
• Ensure all connections are properly insulated with electrical tape or heat shrink tubing.
• 일부 전선은 다음과 같습니다. amplifier turn-on, parking brake sense, and steering wheel control connections, may require specific routing or additional adapters not included in this kit.

5.4. 대시 키트 조립

7. 브래킷 부착: Secure the left and right mounting brackets to your new aftermarket stereo using the screws provided with the stereo.
8. Insert Stereo: Slide the assembled stereo and brackets into the dash kit bezel.

5.5. New Stereo Installation

9. 배선 연결: Plug the vehicle's wiring harness into the aftermarket stereo's harness. Connect the antenna cable.
10. Mount Stereo: Carefully slide the new stereo assembly into the dashboard opening. Secure it with the factory mounting screws.
11. 트림 재설치: Reattach all removed trim panels, ensuring they snap securely into place.

5.6. 최종 단계

12. 배터리를 다시 연결하십시오: 음극 배터리 단자를 다시 연결하십시오.
13. 테스트 기능: Turn on the vehicle and test all functions of the new stereo, including audio, radio, and any connected accessories.

6. 운영

This dash kit provides the mounting solution for your aftermarket stereo. For detailed operating instructions of your new stereo, please refer to the instruction manual provided by the stereo manufacturer.

7. 유지관리

• 주기적으로 장착 나사가 단단히 조여졌는지 확인하십시오.
• Clean the dash kit and stereo faceplate with a soft, damp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
• Ensure no debris accumulates around the stereo or in the dash opening.

8. 문제 해결

• Stereo does not power on:
  • 배터리 연결을 확인하십시오.
  • Verify all wiring harness connections are secure and correct.
  • Check the stereo's fuse.
• Poor fit of stereo in dash kit:
  • Ensure all unnecessary tabs on the dash kit were removed.
  • Confirm your aftermarket stereo's dimensions are within the kit's specifications (96.8mm x 173mm). Minor trimming may be required for oversized units.
  • Verify factory radio brackets are used as required.
• Dash kit does not fit vehicle:
  • Double-check vehicle compatibility (2001-05 Honda Civic, non-Si models).
  • Ensure all factory components were removed correctly.

9. 사양

10. 보증 및 지원

The Scosche HA1710B Dash Kit is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support.

For technical assistance or warranty claims, please contact Scosche customer support directly. Refer to the official Scosche web연락처 정보는 웹사이트 또는 제품 포장에서 확인할 수 있습니다.