1. 제품 오버view
The Sunlite PLT26/E/SP27K is a 26-watt compact fluorescent plug-in light bulb designed for use with external electronic ballasts. This 4-pin bulb provides 1800 lumens of light output with a color rendering index (CRI) of 80, ensuring accurate color perception. It features a 2700K color temperature, producing a warm white light similar to traditional incandescent bulbs. The bulb is engineered for longevity, offering an average lamp life of 10,000 hours, and is compatible with GX24Q-3 4-Pin sockets.
Figure 1: Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb. This image displays the overall structure of the 4-pin compact fluorescent bulb.
2. 안전 정보
Please read and understand all safety instructions before installing or replacing the light bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- 전원 끄기 : Always turn off the power to the fixture at the circuit breaker or fuse box before attempting any installation, removal, or maintenance.
- 쿨다운: Allow the bulb to cool completely before handling or replacing it to prevent burns.
- 적절한 폐기: 이 소형 형광등amp contains a small amount of mercury. Dispose of the bulb according to local, state, and federal regulations. Do not dispose of in regular household trash.
- 밸러스트 호환성: Ensure that the fixture's electronic ballast is compatible with a 26-watt, 4-pin CFL bulb (GX24Q-3 base). Using an incompatible ballast can damage the bulb or fixture.
- 실내에서만 사용 가능: 이 전구는 실내에서 적절한 조명기구에 사용하도록 설계되었습니다.
- 비조광: This bulb is generally not dimmable unless explicitly stated on the packaging or fixture. Using it with a dimmer not designed for CFLs may cause damage or malfunction.
3. 설치
Follow these steps to properly install your Sunlite PLT26/E/SP27K light bulb:
- 전원이 꺼져 있는지 확인하십시오. Confirm that the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- 오래된 전구를 제거합니다(해당되는 경우): If replacing an existing bulb, gently grasp the base of the old bulb and pull it straight out from the socket. Avoid twisting the glass tubes.
- 소켓 검사: Ensure the GX24Q-3 4-pin socket is clean and free from debris.
- 핀 정렬: Carefully align the four pins on the base of the new Sunlite bulb with the corresponding slots in the fixture's socket.
- 전구 삽입: Push the bulb firmly and straight into the socket until it is securely seated. Do not force the bulb or twist the glass tubes.
그림 2: 클로즈업 view of the 4-pin base of the Sunlite PLT26/E/SP27K bulb. This image highlights the GX24Q-3 base for proper alignment during installation.
4. 운영
Once the bulb is securely installed and the power is restored, the Sunlite PLT26/E/SP27K bulb will illuminate when the light switch is turned on. Compact fluorescent lamps typically require a brief warm-up period to reach full brightness and stable color output. This is normal operation and not an indication of a defect.
5. 유지관리
The Sunlite PLT26/E/SP27K light bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- 청소: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe the glass tubes with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the bulb.
- 대사: When the bulb reaches the end of its operational life (approximately 10,000 hours), it will need to be replaced. Follow the installation steps in Section 3 in reverse to safely remove the old bulb and install a new one.
6. 문제 해결
If you encounter issues with your Sunlite PLT26/E/SP27K light bulb, refer to the following troubleshooting tips:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전구가 켜지지 않습니다 | 고정할 전원이 없음 전구가 제대로 끼워지지 않았습니다 전구가 불량합니다 밸러스트 결함 | 회로 차단기와 벽 스위치를 확인하세요 Ensure bulb is fully inserted into socket 전구를 새것으로 교체하세요 Consult an electrician to check/replace ballast |
| Bulb flickers or cycles on/off | Incompatible or failing ballast 전구 수명이 다해가다 연결이 느슨함 | Ensure ballast is compatible; replace if failing 전구 교체 Re-seat bulb firmly in socket |
| 조명 출력이 어두움 | 전구가 완전히 예열되지 않았습니다 전구 수명이 다해가다 | Allow a few minutes for bulb to reach full brightness 전구 교체 |
7. 사양
Detailed technical specifications for the Sunlite PLT26/E/SP27K Compact Fluorescent Light Bulb:
Figure 3: Sunlite PLT26/E/SP27K bulb illustrating its approximate length of 5.20 inches.
| 특징 | 사양 |
|---|---|
| 상표 | 선라이트 |
| 모델 번호 | PLT26/E/SP27K |
| 라이트 타입 | CFL, Fluorescent |
| 왓tage | 26 와트 |
| 명도 | 1800루멘 |
| 색온도 | 2700 켈빈(웜화이트) |
| 연색지수(CRI) | 80 |
| 전구베이스 | GX24Q-3 4-Pin |
| 평균 수명 | 10,000시간 |
| 권tage | 100-120볼트, 60헤르츠 |
| 전구 길이 | 약 5.20 인치 |
| 재료 | 구리(핀) |
| 실내/실외 사용 | 실내 |
8. 보증 및 지원
For specific warranty information regarding your Sunlite PLT26/E/SP27K light bulb, please refer to the product packaging or contact Sunlite customer support directly. General support and product inquiries can be directed to the manufacturer's official channels.
제조업체: 선라이트
Web대지: Visit the Sunlite Store on Amazon