1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Taco 006-B4 Bronze Circulator Pump. The Taco 006-B4 is designed for circulating hot or chilled fresh water in various open or closed loop applications, including hydronic heating, domestic hot water recirculation, hydro-air heating/cooling, heat recovery units, water source heat pumps, drain-down open loop solar systems, and potable water applications. Please read this manual thoroughly before installation and operation.
2. 안전 정보
경고: 이러한 안전 지침을 따르지 않을 경우 심각한 부상이나 재산 피해가 발생할 수 있습니다.
- 펌프를 정비하기 전에 항상 전원을 분리하세요.
- 설치 및 서비스는 자격을 갖춘 인력에 의해서만 수행되어야 합니다.
- 모든 전기 연결이 해당 지역의 법규와 규정을 준수하는지 확인하세요.
- Do not operate the pump without water flowing through it, as this can cause damage.
- The pump operates at 115 Volts. Exercise caution to prevent electrical shock.
- The pump can become hot during operation. Avoid direct contact with the pump housing.
- 설치 및 유지관리 시에는 적절한 개인 보호 장비(PPE)를 착용하세요.
3. 제품 오버view
The Taco 006-B4 is a compact and efficient bronze circulator pump designed for reliable performance in various water circulation systems. Its unique design features a replaceable cartridge containing all moving parts, simplifying service and extending product life.
주요 특징:
- Bronze construction for corrosion resistance.
- Standard high capacity output with a compact design.
- Quiet and efficient operation.
- Direct drive motor with low power consumption (0.025 HP).
- Unique replaceable cartridge design for easy field service.
- Self-lubricating, requiring no mechanical seal and minimal maintenance.
- Suitable for potable water applications.
Figure 1: Taco 006-B4 Bronze Circulator Pump. This image shows the compact design of the circulator pump with its bronze housing and electrical connection box.
4. 설정 및 설치
Proper installation is crucial for the optimal performance and longevity of your circulator pump. It is highly recommended that installation be performed by a qualified plumber or HVAC technician.
4.1 설치 전 확인 사항
- Verify that the pump model (006-B4) is suitable for your application.
- Ensure the power supply matches the pump's requirements (115 Volts AC/DC).
- Confirm that the piping system is clean and free of debris.
- Have all necessary tools and materials, including appropriate fittings for 3/4-inch sweat connections.
4.2 Mounting and Piping
- Choose a location that allows for easy access for future servicing and provides adequate ventilation.
- Mount the pump securely in the piping system. The pump is designed for 3/4-inch sweat connections. Ensure proper soldering techniques are used to prevent leaks.
- Ensure the pump is installed with the motor shaft in a horizontal position to ensure proper lubrication and operation.
- Install isolation valves on both sides of the pump to facilitate future maintenance without draining the entire system.
- Fill the system with water and purge all air before operating the pump.
4.3 전기 연결
- 전기 연결 작업을 하기 전에 반드시 주 전원 공급 장치가 꺼져 있는지 확인하십시오.
- Connect the pump to a dedicated 115 Volt AC/DC circuit, protected by a fuse or circuit breaker as required by local electrical codes.
- Follow the wiring diagram provided with the pump or consult a qualified electrician.
- 모든 연결이 단단하고 안전한지 확인하세요.
5. 운영
5.1 초기 시동
- After installation and filling the system, ensure all air has been purged from the piping.
- Restore power to the pump. The pump should start operating quietly.
- 연결 부위 주변에 누출이 있는지 확인하십시오.
- Monitor the system for proper circulation and temperature distribution.
5.2 정상 작동
- The Taco 006-B4 operates with a flow range of 0-10 GPM and a head range of 0-9 feet.
- It is designed to handle fluid temperatures between 40°F (4°C) and 220°F (104°C).
- The maximum working pressure for this pump is 125 psi.
- The pump's 0.025 horsepower motor ensures efficient circulation with low power consumption.
- The pump is self-lubricating and does not require external lubrication.
6. 유지관리
The Taco 006-B4 circulator pump is designed for maintenance-free operation due to its self-lubricating properties and unique replaceable cartridge design.
6.1 정기 점검
- Periodically inspect the pump and piping for any signs of leaks.
- 작동 중에 이상한 소음이 들리는지 주의 깊게 살펴보십시오. 이상한 소음은 문제가 발생했음을 나타낼 수 있습니다.
- Ensure the pump is not running dry. Operating the pump without water will cause damage and is not covered under warranty. If the water supply to the house is turned off, ensure the pump is also unplugged or powered down.
6.2 카트리지 교체
The unique replaceable cartridge contains all the moving parts of the circulator. If the pump requires service beyond simple checks, the cartridge can be replaced, effectively renewing the pump's internal components. Refer to the specific cartridge replacement instructions provided by Taco or consult a qualified technician.
- 경고: Disconnect all power to the pump before attempting any service.
- Close the isolation valves on both sides of the pump.
- Drain the water from the pump section.
- Follow the manufacturer's instructions for removing and replacing the cartridge assembly.
- After replacement, reopen isolation valves, refill the system, purge air, and restore power.
7. 문제 해결
This section provides solutions to common issues you might encounter with your Taco 006-B4 circulator pump. For problems not listed here, or if solutions do not resolve the issue, contact a qualified technician.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 작동하지 않음 | No power; tripped circuit breaker; faulty wiring; seized motor. | Check power supply and circuit breaker. Verify wiring connections. If motor is seized, consider cartridge replacement or professional service. |
| Pump runs but no circulation | Air in system; closed isolation valves; clogged impeller; incorrect rotation. | Purge air from the system. Ensure isolation valves are fully open. Inspect impeller for obstructions (requires professional service). Verify correct motor rotation if applicable. |
| 이상한 소음이나 진동 | Air in system; cavitation; worn bearings (in cartridge); debris in pump. | Purge air from the system. Ensure adequate water flow to prevent cavitation. If noise persists, consider cartridge replacement. |
| Pump is hot to the touch | Normal operation; running dry; restricted flow; motor overload. | Some heat is normal. Ensure pump is not running dry. Check for restricted flow in piping. If excessively hot, disconnect power and seek professional advice. |
| 연결부 누수 | Improperly sealed connections; damaged fittings. | Tighten connections. If leaks persist, drain system and re-seal or replace fittings. |
8. 사양
| 모델 번호 | 006-B4 |
| 연결 크기 | 3/4인치 땀 |
| 재료 | Bronze (Housing), Cast Iron (Motor Casing) |
| 유량 범위 | 0-10 GPM (Gallons Per Minute) |
| 헤드 범위 | 0-9피트 |
| 최소 유체 온도 | 화씨 40도(섭씨 4도) |
| 최대 유체 온도 | 화씨 220도(섭씨 104도) |
| 최대 작동 압력 | 125프사이 |
| 권tage | 115 볼트 |
| 전원 | 교류/직류 |
| 모터 마력 | 0.025마력 (1/40마력) |
| 품목 무게 | 4.41파운드(2kg) |
| 제품 치수 | 5 x 4 x 7인치(12.7 x 10.2 x 17.8cm) |
9. 보증 및 지원
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official Taco website. If you require technical support, have questions about installation, or need assistance with troubleshooting, please contact Taco customer service or your authorized dealer.
제조업체: 타코 주식회사
Web대지: www.tacocomfort.com
