HobbyZone HBZ4913

하비존 데칼 시트: Champ - 사용 설명서

Model: HBZ4913

브랜드: 하비존

제품 끝view

This instruction manual provides guidance for the proper application and care of the HobbyZone Decal Sheet designed for the Champ model. These decals are intended for cosmetic enhancement and replacement on compatible HobbyZone aircraft models.

하비존 채널amp Decal Sheet showing various decals including 'G-FLYR' and HobbyZone logo.

Image: The HobbyZone Champ Decal Sheet, featuring various markings and the HobbyZone logo, ready for application.

Setup: Application Preparation

Before applying the decals, ensure the surface is properly prepared to achieve optimal adhesion and appearance.

  1. 표면 청소: Thoroughly clean the area where the decal will be applied. Use a mild soap and water solution or an appropriate model-safe cleaner. Ensure the surface is free of dust, grease, oil, and fingerprints. Allow the surface to dry completely.
  2. 도구 모으기: Prepare the necessary tools: a pair of sharp scissors or a hobby knife, a soft cloth or squeegee, and optionally, masking tape for positioning.
  3. Inspect Decals: Carefully inspect the decal sheet for any imperfections. Identify the specific decals you intend to use.
  4. Pre-cut (Optional): If the decals are not pre-cut, carefully cut around the desired decal using sharp scissors or a hobby knife, leaving a small margin around the design.

Operating: Decal Application Process

Follow these steps for precise and effective decal application.

  1. 위치: Gently peel the decal from its backing sheet. For larger decals, it may be helpful to peel only a small section first. Carefully align the decal on the desired surface. You may use masking tape to temporarily hold one edge in place for precise alignment.
  2. 애플리케이션: Once positioned, slowly press the decal onto the surface, working from one edge to the other. Use a soft cloth or squeegee to smooth out the decal, applying gentle, even pressure to remove any air bubbles. Work outwards from the center of the decal.
  3. 기포 제거: If air bubbles appear, gently lift the nearest edge of the decal and re-apply, smoothing it down. For stubborn small bubbles, a very fine needle can be used to carefully prick the bubble, then smooth it out.
  4. 최종 접착력: Once the decal is fully applied and smoothed, press firmly over the entire decal with a soft cloth to ensure complete adhesion.
  5. 건조 시간: Allow the decals to cure for at least 24 hours before handling the decaled surface extensively or exposing it to moisture.

유지

Proper care will help maintain the longevity and appearance of your applied decals.

문제 해결

Common issues and their solutions during decal application.

문제가능한 원인해결책
Air Bubbles Under Decal도포가 고르지 않고, 공기가 갇혀 있습니다.Gently lift the nearest edge and re-smooth from the center outwards. For small bubbles, carefully prick with a fine needle and smooth.
Decal Not StickingSurface not clean; insufficient pressure during application.Ensure surface is clean and dry before application. Apply firm, even pressure across the entire decal.
Decal Peeling at EdgesIncomplete adhesion at edges; rough handling.Press down firmly on edges during application. Avoid touching edges after application until fully cured.
Decal MisalignedImproper initial positioning.If caught immediately, gently lift and reposition. If decal has set, it may be difficult to correct without damage. Consider removing and replacing with a new decal if available.

명세서

Key specifications for the HobbyZone Decal Sheet: Champ (HBZ4913).

하비존 채널amp Decal Sheet with dimensions overlay, showing a height of 7.5 inches or 19 cm.

Image: The decal sheet with an overlay indicating its approximate dimensions, specifically a height of 7.5 inches (19 cm).

보증 및 지원

This decal sheet is an accessory item. Warranty information for the HobbyZone Champ aircraft, for which these decals are intended, is typically provided with the aircraft itself. For specific warranty details regarding this accessory or for product support, please refer to the official HobbyZone or Horizon Hobby web대지.

공식적인 Web대지: www.horizonhobby.com

관련 문서 - HBZ4913

사전view 하비존 채널amp HBZ4900 RTF RC 비행기 사용 설명서
HobbyZone Ch에 대한 포괄적인 사용 설명서amp HBZ4900 즉시 비행 가능한(RTF) 원격 조종 비행기. 설정, 작동, 안전 예방 조치, 충전, 비행 및 유지 보수에 대해 알아보세요.
사전view Hobbyzone Sport Cub S 2: Aeromodello RC에 따른 Itruzioni 설명서
Hobbyzone Sport Cub S 2의 무선 통신에 대해 모든 사용자와 모든 사용자 지정을 완료하고 구성을 확인하세요.
사전view HobbyZone Apprentice S 2 바인딩 절차 부록
HobbyZone Apprentice S 2 RC 항공기 송신기를 수신기에 바인딩하는 단계별 가이드입니다. 이 부록은 바인딩 과정에 대한 명확한 지침과 시각적 설명을 제공합니다.
사전view HobbyZone Apprentice S 2 1.2m 바인딩 절차
HobbyZone Apprentice S 2 1.2m RC 항공기 수신기를 송신기에 바인딩하는 방법에 대한 설명서입니다. 이 가이드는 안전하고 올바른 작동을 위한 올바른 바인딩 절차를 다룹니다.
사전view Hobbyzone Sport Cub S 2 615mm RC 비행기 - 사용 설명서 및 비행 가이드
RTF와 BNF 버전 모두에 대한 설정, 작동, 안전 예방 조치, 충전 및 문제 해결을 다루는 Hobbyzone Sport Cub S 2 615mm RC 비행기에 대한 포괄적인 가이드입니다.
사전view Hobbyzone Sport Cub S 2 615mm RC 비행기 사용 설명서
Hobbyzone Sport Cub S 2 615mm RC 비행기의 종합적인 사용 설명서로, 설치, 작동, 안전, 문제 해결 및 유지 보수에 대한 내용을 다룹니다. SAFE 기술, 송신기 설치 및 배터리 취급에 대한 자세한 지침이 포함되어 있습니다.