1. 소개 및 제품 끝view
This manual provides essential information for the proper installation, operation, and maintenance of your SOLAS HR Titan 4 Stainless Steel 4-Blade Propeller. Please read this manual thoroughly before installation and use to ensure safe and efficient performance.
This image displays the SOLAS HR Titan 4 propeller, featuring four highly polished stainless steel blades. The central hub, designed for shaft attachment, is visible with its internal splines, indicating a right-hand rotation propeller.
The SOLAS HR Titan 4 propeller is engineered for powerful thrust and smooth performance. Constructed from a high-grade stainless steel alloy with an optimal percentage of chromium, nickel, and molybdenum, it offers superior strength, corrosion resistance, and durability. Its high-rake and cupped-blade design contributes to excellent stern lift and acceleration, while also enhancing speed and fuel economy in the mid-range.
주요 특징:
- Powerful thrust and smooth performance
- Increased speed and economy in the mid-range
- Great stern lift and acceleration
- 14-1/8" Diameter, 19" Pitch
- 오른손 회전
2. 안전 정보
Always prioritize safety when handling and installing marine propellers. Failure to follow safety guidelines can result in serious injury or damage to equipment.
- 엔진 꺼짐: Ensure the engine is completely off and the ignition key is removed before approaching the propeller.
- Secure Boat: Always secure the boat to prevent movement during propeller work.
- 보호 장비: Wear appropriate protective gloves to prevent cuts from sharp propeller edges.
- 클리어 영역: Keep hands, feet, and loose clothing clear of the propeller blades.
- 전문적인 설치: If you are unsure about any step, consult a qualified marine technician.
3. 설정 및 설치
Proper installation is crucial for optimal performance and safety. Refer to your engine's service manual for specific torque specifications and additional instructions.
필요한 도구:
- Propeller wrench or socket set
- Cotter pin pliers
- Grease (marine grade)
- New cotter pin (always use a new one)
설치 단계:
- Ensure the engine is off and the boat is securely positioned.
- Remove the old propeller (if applicable) by straightening and removing the cotter pin, then unscrewing the propeller nut. Carefully slide off the old propeller, thrust washer, and any other components.
- Inspect the propeller shaft for any damage or corrosion. Clean the shaft thoroughly.
- Apply a thin layer of marine-grade grease to the propeller shaft splines.
- Slide the new SOLAS HR Titan 4 propeller onto the shaft, ensuring the splines align correctly.
- Install the thrust washer, propeller nut, and any other components as per your engine manufacturer's instructions.
- Tighten the propeller nut to the manufacturer's specified torque.
- Insert a new cotter pin through the propeller nut and shaft hole, bending the ends to secure it. Never reuse an old cotter pin.
- Verify that the propeller is securely fastened and rotates freely without obstruction.
4. 사용 설명서
The SOLAS HR Titan 4 propeller is designed for optimal performance. Observe the following guidelines during operation:
- 초기 테스트: After installation, perform a cautious test run in calm waters to ensure proper function and no unusual vibrations.
- RPM 범위: Ensure your engine operates within its recommended wide-open throttle (WOT) RPM range with the new propeller. An incorrect RPM can lead to engine damage or inefficient performance.
- 장애물을 피하십시오: Always be aware of your surroundings and avoid striking submerged objects, which can damage the propeller and lower unit.
- 트림 조정: Experiment with engine trim to find the optimal angle for your boat's load and water conditions, maximizing efficiency and speed.
5. 유지관리
Regular maintenance extends the life and performance of your propeller.
- 정기 검사: Periodically inspect the propeller for nicks, bends, or cracks. Even minor damage can affect performance and fuel efficiency.
- 청소: Clean the propeller regularly, especially after use in saltwater, to prevent corrosion and marine growth.
- 샤프트 윤활: Annually remove the propeller, clean the shaft, and reapply marine-grade grease to the splines to prevent corrosion and seizing. Always use a new cotter pin upon reinstallation.
- 수리하다: If damage is found, have the propeller professionally repaired by a qualified propeller shop. Do not attempt to repair it yourself, as improper balancing can cause severe vibration and damage to your engine's lower unit.
6. 문제 해결
이 섹션에서는 프로펠러 성능과 관련된 일반적인 문제들을 다룹니다.
일반적인 문제 및 해결책:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 과도한 진동 | Damaged or unbalanced propeller, bent propeller shaft, worn hub. | Inspect propeller for damage; have it repaired or replaced. Check propeller shaft for straightness. Inspect hub for wear. |
| Poor Acceleration/Top Speed | Incorrect propeller pitch, damaged propeller, engine issues. | Ensure propeller pitch is suitable for your boat/engine. Inspect propeller for damage. Consult engine manual for troubleshooting engine performance. |
| Engine Over-revving | Propeller pitch too low, propeller cavitation, hub slipping. | Consider a propeller with higher pitch. Check for propeller damage or hub issues. |
| Engine Under-revving | Propeller pitch too high, engine overloaded. | Consider a propeller with lower pitch. Reduce boat load. |
7. 사양
| 사양 | 세부 사항 |
|---|---|
| 모델 번호 | 2553-141-19 |
| 상표 | 솔라스 |
| 재료 | 스테인리스 스틸 |
| 블레이드 수 | 4 |
| 지름 | 14-1/8 인치 |
| 정점 | 19인치 |
| 회전 | 오른손 (RH) |
| 품목 무게 | 16파운드 |
| 제품 치수 | 15.5 x 15.5 x 8 인치 |
8. 보증 및 지원
For information regarding product warranty, returns, or technical support, please contact SOLAS customer service directly or refer to the official SOLAS web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
While extended protection plans may be available from third-party providers, these are separate from the manufacturer's warranty.
추가 지원이 필요하면 다음을 방문하세요. SOLAS official web대지.
