소개
The MXR Bass Envelope Filter M82 is an analog effect pedal designed specifically for bass guitar, delivering classic envelope filter sounds. It features independent controls for dry and effect signals, allowing for precise blending without sacrificing low-end frequencies. The pedal's wide range of filter tones can be adjusted using the Decay and Q controls, while the Sensitivity knob adapts the pedal's response to your playing dynamics and bass type (passive or active). Built with robust power supply circuitry for protection against voltage issues and true-bypass switching to maintain signal integrity, the M82 is housed in a durable, compact aluminum enclosure.
주요 특징
- Bypass Footswitch with LED: Engages or disengages the effect, with an LED indicator for status.
- Dry Control: Adjusts the level of the unaffected bass signal.
- FX 제어: Adjusts the level of the effected signal.
- Decay Control: Shapes the filter's sweep time.
- "Q" Control: Adjusts the filter's resonance or intensity.
- 감도 제어: Tailors the filter's response to playing dynamics and instrument output.
- True Bypass Switching: Preserves original tone when the effect is off.
- 내구성 있는 알루미늄 하우징: Compact and road-ready design.
설치 가이드
페달에 전원 공급
The MXR Bass Envelope Filter M82 requires an external 9-volt DC power adapter (e.g., Dunlop ECB003) with a center-negative polarity. This pedal does not have an internal battery compartment. Ensure the power source meets the pedal's requirements to prevent damage.
페달 연결하기
- 베이스 기타를 연결하세요 입력 페달 오른쪽 측면에 있는 잭에 표준 1/4인치 악기 케이블을 사용하여 연결합니다.
- 연결하다 산출 페달 왼쪽의 잭을 당신의 것에 연결하세요 amp앰프나 신호 체인의 다음 페달에 다른 1/4인치 악기 케이블을 사용하여 연결하십시오.
- Connect a 9-volt power adapter to the 9V 전원 입력 잭.
영상: 뒤쪽 view of the MXR Bass Envelope Filter M82 pedal. This image highlights the 1/4-inch input jack, the 1/4-inch output jack, and the 9V power input jack, along with regulatory markings. This is where you connect your instrument, amplifier 및 전원 공급 장치.
영상: 옆 view of the MXR Bass Envelope Filter M82 pedal, clearly showing the 1/4-inch output jack. This jack connects to your amplifier 또는 신호 체인의 다음 페달.
영상: 옆 view of the MXR Bass Envelope Filter M82 pedal, clearly showing the 1/4-inch input jack. Your bass guitar connects here.
작동 지침
영상: 맨 위 view of the MXR Bass Envelope Filter M82 pedal, displaying all control knobs (Dry, FX, Decay, Q, Sensitivity) and the footswitch with its LED indicator. This is the primary interface for adjusting the pedal's sound.
컨트롤 오버view
- 건조 손잡이:
- Controls the volume of your unaffected, direct bass signal. Use this to retain your instrument's natural low-end and blend it with the effect.
- FX 노브:
- Controls the volume of the envelope filter effect signal. Adjust this to determine how prominent the filter sound is in your mix.
- DECAY 노브:
- Adjusts the speed at which the filter sweep closes. Turning it clockwise results in a slower, longer sweep, while counter-clockwise settings produce a faster, snappier sweep.
- Q 노브:
- Determines the intensity or resonance of the filter effect. Higher 'Q' settings create a more pronounced, vocal-like "wah" sound, while lower settings are more subtle.
- SENSITIVITY Knob:
- Sets the threshold for the envelope filter's response to your playing dynamics. Adjust this to match your bass's output level (passive or active) and your picking/plucking attack. Turning it clockwise increases sensitivity, making the filter react to lighter playing.
- 풋스위치:
- Toggles the effect on and off. The adjacent LED illuminates when the effect is active.
Achieving Desired Tones
- Funk Tones: Start with high Sensitivity, moderate Q, and a fast Decay. Adjust Dry/FX to taste.
- Subtle Filter: Use lower Q and Sensitivity settings, with a higher Dry mix.
- Long Sweeps: Increase the Decay knob for a slower, more drawn-out filter movement.
- Experiment with the Sensitivity knob to find the sweet spot where the filter responds naturally to your playing style and instrument's output.
유지
- 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
- 저장: 페달은 극한의 온도와 습도를 피해 건조한 환경에 보관하세요.
- 전원 공급 장치: Always use a regulated 9V DC power supply with a center-negative polarity. Using an incorrect power supply can damage the unit.
- 사이: Ensure all cables are securely connected to prevent signal loss or intermittent operation.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 페달을 밟아도 소리가 나지 않습니다. |
|
|
| Effect is too subtle or not responding. |
|
|
| Effect is too harsh or overwhelming. |
|
|
| Loss of low-end frequencies. | Dry knob set too low. | Increase the Dry knob to blend in more of your original bass signal. |
명세서
| 모델 번호 | M82 |
| 품목 무게 | 10.9 온스(약 309그램) |
| 제품 치수 | 6 x 4.5 x 2.5인치(약 15.24 x 11.43 x 6.35cm) |
| 전원 | 9V DC (external power adapter required, center-negative) |
| 권tage | 9.00V |
| 하드웨어 인터페이스 | 1/4인치 오디오 입력/출력 |
| 신호 형식 | 비슷한 물건 |
| 하우징 소재 | 내구성이 뛰어난 알루미늄 |
| 색상 이름 | 보라 |
보증 및 지원
보증 정보 및 기술 지원에 대해서는 MXR 공식 웹사이트를 참조하십시오. web웹사이트를 방문하거나 공인 대리점에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
온라인 리소스: Visit the official MXR web대지
