Leviton 20A 125V Industrial Grade 4-in-1 Receptacle User Manual

소개

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Leviton 20A 125V Industrial Grade 4-in-1 Receptacle, Model 21254-HI. Please read this manual thoroughly before installation and retain it for future reference.

안전 정보

경고: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

주의: Use this device only with copper or copper-clad wire. Do not use with aluminum wire.

제품 특징

• 20 Amp, 125 Volt rating
• Grounding type receptacle
• Durable Nylon body material
• Zinc-plated steel 8-32 mounting screws
• Industrial Series Extra Heavy Duty Hospital Grade design
• 4-in-1 receptacle configuration
• Ivory color finish

패키지 내용

• 1 x Leviton 20A 125V Industrial Grade 4-in-1 Receptacle (Model 21254-HI)

Image: Leviton 20A 125V Industrial Grade 4-in-1 Receptacle in Ivory. This image shows the front view of the electrical outlet with four receptacles.

설치 지침

1. 전원 끄기: Locate the circuit breaker or fuse box that controls the power to the outlet where you intend to install the receptacle. Turn off the power completely and verify it is off using a voltag전자 테스터.
2. (해당되는 경우) 기존 용기를 제거하십시오. Carefully remove the wall plate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting their connections (hot, neutral, ground).
3. 전선 준비: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. Ensure wires are straight and free of nicks.
4. 전선 연결:
   • 연결하다 녹색 또는 구리 접지선 to the green grounding screw on the receptacle.
   • 연결하다 white neutral wire to the silver-colored screw terminals.
   • 연결하다 black or colored hot wire to the brass-colored screw terminals.

   Ensure all connections are tight and secure. For back-wiring, insert stripped wires into the appropriate holes and tighten screws.

5. 마운트 수용기: Carefully fold the wires into the electrical box. Secure the new receptacle to the electrical box using the provided mounting screws.
6. 벽면 플레이트 설치: Attach the wall plate over the receptacle.
7. 복원력 : 회로 차단기나 퓨즈 박스에서 전원을 다시 켜세요.
8. 시험: Test the receptacle with a known working device to ensure proper operation.

설치 과정의 어떤 부분이든 확실하지 않은 경우에는 항상 자격을 갖춘 전기 기술자와 상담하세요.

작업

The Leviton 21254-HI receptacle provides four outlets for connecting electrical devices. Simply insert the plug of your device into any of the available outlets. This heavy-duty receptacle is designed for demanding environments, offering reliable power connections.

중요한: Do not overload the receptacle. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle.

유지

• 청소: To clean the receptacle, first turn off the power at the circuit breaker. Use a soft, damp 표면을 닦을 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오.
• 점검: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off power and replace the receptacle immediately.
• 견고함: Ensure mounting screws and wire connections remain tight. Loose connections can cause overheating.

문제 해결

명세서

보증 및 지원

For warranty information or technical support, please contact Leviton customer service. Details can typically be found on the product packaging or the official Leviton web대지.

레비톤 공식 Web대지: www.leviton.com