1. 서론
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. 안전 지침
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- 항상 접지된 전원 콘센트에 장치를 연결하십시오.
- Ensure the power adapter's voltage는 지역 전원 공급 장치와 일치합니다.
- 본 제품을 비, 습기 또는 과도한 습도에 노출시키지 마십시오.
- 장치를 열원 근처나 직사광선에 노출시키지 마십시오.
- 전원 코드가 손상된 경우 제품을 작동하지 마십시오.
- Refer all servicing to qualified service personnel. There are no user-serviceable parts inside.
- 청소나 유지관리 작업을 하기 전에 전원을 차단하세요.
3. 패키지 내용
포장을 개봉할 때 아래 나열된 모든 품목이 있는지, 그리고 양호한 상태인지 확인하십시오.
- Elation Professional SDC-6 v2 DMX Controller
- 9V 전원 어댑터
- 사용 설명서 (본 문서)
4. 설정
Follow these steps to set up your SDC-6 v2 DMX controller:
- 놓기: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- DMX 연결: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- 전원 연결: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
그림 4.1: 상단 view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
그림 4.2: 측면 view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. 사용 설명서
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. 전원 표시등
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. 유지관리
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- 청소: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- 저장: When not in use for extended periods, store the controller in a cool, dry place, protected from dust and extreme temperatures.
- 힘: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. 문제 해결
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 표시등 없음 | 전원 어댑터가 연결되지 않았거나 고장났습니다. 전원 콘센트가 작동하지 않습니다. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| 간헐적 제어 | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. 사양
| 모델 | SDC6 |
| 상표 | Elation Professional (ADJ) |
| 채널 | 6 DMX Channels + 1 Master Fader |
| DMX 커넥터 | 3-pin XLR DMX Output |
| 전원 공급 장치 | 9V DC (포함된 전원 어댑터 사용) |
| 치수(길이 x 너비 x 높이) | 173mm x 153mm x 55mm(6.81인치 x 6.02인치 x 2.17인치) |
| 무게 | 1kg(2.2파운드) |
| 색상 | 검은색 |
| 원산지 | 중국 |
9. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
