소개
This manual provides detailed instructions for the safe and efficient operation of your ROBBE Power Peak Compact 6s EQ battery charger. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
제품 끝view
The ROBBE Power Peak Compact 6s EQ is a versatile battery charger designed for various battery types, including LiPo, LiFe, LiIon, NiMH, NiCd, and Pb batteries. It features an integrated balancer for lithium batteries and a clear display for monitoring charging parameters.
그림 1: The ROBBE Power Peak Compact 6s EQ battery charger. This image shows the compact black charger unit with a blue backlit LCD screen and four red control buttons. A battery pack, white with red and black wires, is connected to the charger's output ports on the left side.
설정
1. 개봉 및 검사
- 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
- Inspect the charger and accessories for any signs of damage. If any damage is found, do not use the device and contact your retailer.
- Ensure all listed components are present: charger unit, power cable, and any included adapter cables.
2. 전원에 연결
- Connect the provided power cable to the charger's power input port.
- Plug the other end of the power cable into a suitable AC power outlet (100-240V AC).
- The charger's display should illuminate, indicating it is powered on.
3. 배터리 연결
- Identify the correct charging cable and balance board (if applicable) for your battery type.
- Connect the main charging leads from the battery to the charger's output ports, ensuring correct polarity (red to positive, black to negative).
- For lithium batteries, connect the balance lead from the battery to the corresponding balance port on the charger.
- 계속하기 전에 모든 연결이 안전한지 확인하세요.
작동 지침
1. 메뉴 탐색
The charger features a clear LCD display and four control buttons (typically labeled as 'Menu', 'Inc/Dec', 'Start/Stop').
- 메뉴 버튼: 눌러서 메인 메뉴 옵션을 순환하세요.
- Inc/Dec Buttons: Use to adjust values or navigate within a sub-menu.
- 시작/중지 버튼: Press and hold to start a charging process; press briefly to stop.
2. Selecting Battery Type and Charging Mode
- From the main menu, use the 'Menu' button to select the desired battery type (e.g., LiPo, NiMH).
- Once the battery type is selected, use the 'Inc/Dec' buttons to choose the charging mode (e.g., Charge, Balance Charge, Fast Charge, Storage, Discharge).
- Confirm your selection by pressing the 'Start/Stop' button.
3. Setting Charging Parameters
- After selecting the mode, the display will prompt you to set parameters such as charging current (Amps) and cell count (for lithium batteries).
- Use the 'Inc/Dec' buttons to adjust these values according to your battery's specifications. Always refer to your battery's manufacturer recommendations for safe charging rates.
- Press 'Start/Stop' to confirm each parameter.
4. Starting and Monitoring the Charge
- Once all parameters are set, press and hold the 'Start/Stop' button to begin the charging process. The charger may perform a pre-charge check.
- The display will show real-time charging information, such as current, voltage, charged capacity, and elapsed time.
- Monitor the charging process. If any unusual behavior (e.g., excessive heat, swelling) is observed, immediately stop the charge by pressing the 'Start/Stop' button.
- The charger will automatically stop when the battery is fully charged and emit an audible alert.
5. 안전수칙
- Always charge batteries on a non-flammable surface and away from flammable materials.
- 충전 중인 배터리를 절대로 방치하지 마십시오.
- 충전하는 동안 적절한 환기를 유지하세요.
- 손상되거나 부풀어 오른 배터리는 충전하지 마세요.
- Use only compatible battery types and charging parameters.
- Keep the charger away from moisture and extreme temperatures.
유지
1. 청소
- Before cleaning, disconnect the charger from the power source and any connected batteries.
- 부드럽고 마른 천으로 충전기 외부를 닦아주세요.
- Do not use liquid cleaners or solvents, as these can damage the electronics.
- 환기구에 먼지나 이물질이 없는지 확인하세요.
2. 보관
- 충전기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- If storing for an extended period, disconnect all cables.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 충전기의 전원이 켜지지 않습니다. | 전원 공급이 안 됩니다. 케이블에 결함이 있습니다. | 전원 케이블 연결을 확인하고 다른 콘센트를 사용해 보세요. |
| Charging error message on display. | Incorrect battery type/settings; poor connection; damaged battery. | Verify battery type and parameters; check all connections; inspect battery for damage. |
| 배터리가 충전되지 않거나 충전 속도가 느립니다. | Low charging current setting; faulty battery. | Increase charging current (within battery limits); test with a different battery. |
| Charger or battery gets excessively hot. | Overcurrent; internal fault; damaged battery. | Immediately stop charging. Reduce current. Discontinue use of damaged battery. Seek professional assistance if charger is faulty. |
명세서
- 상표: 로브
- 모델: Power Peak Compact 6s EQ
- 제품 유형: 배터리 충전기
- 색상: 검은색
- ASIN: B003A69QN8
- 제조업체: 로브
- Note: Specific electrical parameters (e.g., input voltage range, charge current range, supported battery types/cell counts) are typically found on the device or its packaging. Please refer to those for detailed technical specifications.
보증 및 지원
ROBBE products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ROBBE website. For technical support or service inquiries, please contact ROBBE customer service or your authorized dealer.
You can often find more information and support on the manufacturer's official web대지: www.robbe.com (참고: 이것은 플레이스홀더입니다. URL실제 제조업체를 확인해 주십시오. web(지원 사이트).
