매뉴얼+

Sunco Lighting T8 LED 4-Foot Tube Light

Sunco T8 LED 4피트 튜브 전구 사용 설명서

Model: T8 LED 4-Foot Tube Light | Brand: Sunco Lighting

1. 소개 및 이상view

Thank you for choosing Sunco T8 LED 4-Foot Tube Light Bulbs. These 18W, 5000K Daylight, Single Ended Power (Type B) bulbs are designed as a direct replacement for traditional fluorescent tubes, offering superior brightness and energy efficiency. Each bulb provides 2200 lumens of consistent, flicker-free illumination, making them ideal for various indoor applications such as garages, workshops, and commercial spaces.

These LED tubes are engineered for a ballast bypass installation, which eliminates the need for an existing ballast, thereby reducing maintenance and extending the fixture's lifespan. Please read this manual thoroughly before installation and operation to ensure safe and proper use.

2. 안전 정보

WARNING: Prior to installing Type B LED tubes, all existing ballasts must be removed, and the fixture rewired accordingly. Failure to do so may damage the lighting tube and create a serious fire hazard. Installation should only be performed by a qualified electrician or a knowledgeable individual with proper safety precautions.

  • 전기 작업을 시작하기 전에 항상 차단기에서 전원을 차단하십시오.
  • 고정 장치가 적절하게 접지되었는지 확인하십시오.
  • Do not use these LED tubes with a dimmer switch unless explicitly stated as dimmable. These are non-dimmable bulbs.
  • Inspect the tubes for any damage before installation. Do not install damaged tubes.
  • 안전 안경, 장갑 등 적절한 개인 보호 장비(PPE)를 착용하세요.

3. 패키지 내용

  • Sunco T8 LED 4-Foot Tube Light Bulbs (Quantity: 30)
Sunco T8 LED 4-foot tube light bulb and a pack of 30 bulbs.
A single Sunco T8 LED 4-foot tube light bulb with specifications printed on it, alongside a pack of 30 identical bulbs.

4. 설정 및 설치

These Sunco T8 LED tubes are designed for Type B, Single Ended Power (SEP) ballast bypass installation. This means the existing fluorescent ballast must be removed, and the fixture rewired to directly power the LED tubes.

4.1 필요한 도구(포함되지 않음)

  • 드라이버
  • 와이어 스트리퍼
  • 와이어 너트
  • 권tag전자 테스터
  • 보안경 및 장갑

4.2 설치 단계

  1. 전원 끄기: Locate the circuit breaker controlling the fixture and turn off the power. Verify power is off using a voltag전자 테스터.
  2. 기존 형광등을 제거하십시오: Carefully remove the old fluorescent tubes from the fixture.
  3. 안정기를 제거하세요: Open the fixture cover. Disconnect all wires leading to and from the ballast. Remove the ballast from the fixture.
  4. Rewire the Fixture (Single Ended Power):
    • Identify the live (L) and neutral (N) wires from the main power supply.
    • Connect the live (L) wire to one end of the tombstone (socket) on one side of the fixture.
    • Connect the neutral (N) wire to the other end of the tombstone (socket) on the same side of the fixture.
    • The tombstones on the opposite side of the fixture will not be wired.
    • Ensure all connections are secure with wire nuts and insulated.

    Note: Single-ended installation requires non-shunted tombstones. If your fixture has shunted tombstones, they must be replaced with non-shunted ones (tombstones not included).

  5. LED 튜브 설치: Insert the Sunco T8 LED tubes into the rewired tombstones, ensuring the 'input' side of the LED tube aligns with the wired end of the fixture.
  6. 복원력 : Close the fixture cover and turn the power back on at the circuit breaker.
Diagram illustrating ballast removal and rewiring for Type B LED tube installation.
A diagram showing the electrical wiring for Type B LED tubes, emphasizing the need to remove the existing ballast and rewire the fixture for improved safety, eliminated power loss, and reduced maintenance.
Diagram comparing single-ended and double-ended power connections for LED tubes.
An illustration showing the wiring differences between single-ended and double-ended LED tube connections, noting that non-shunted tombstones are required for single-ended installation.

4.3 설치 비디오 가이드

설치 과정에 대한 시각적 가이드는 아래 영상을 참조하세요.

Official Sunco Lighting video demonstrating the installation process for T8 LED linear tubes, including ballast bypass and wiring instructions.

5. 사용 설명서

Once properly installed and power is restored, the Sunco T8 LED tubes will provide instant illumination without any warm-up time or flickering. Simply use the wall switch or fixture switch to turn the lights on and off.

Room illuminated by 4ft Type B LED T8 Tubes, showing 2200 lumens of bright light.
An office or commercial space brightly lit by multiple 4ft Type B LED T8 Tubes, highlighting their 2200 lumen output and efficient 18W power consumption.
Comparison of flicker-free Sunco lighting versus flickering lights from other brands.
Two smartphone screens side-by-side, one showing a clear image of a ceiling light (Sunco Flicker Free) and the other showing a flickering effect (Others Flicker), demonstrating the flicker-free experience of Sunco LED tubes.

6. 유지관리

Sunco T8 LED tubes are designed for long-lasting performance and require minimal maintenance compared to traditional fluorescent tubes. Their 50,000-hour lifetime significantly reduces the frequency of bulb replacements.

  • 청소: Ensure the power is off before cleaning. Gently wipe the tubes with a soft, dry, or slightly damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
  • 점검: Periodically check the tubes and fixture for any signs of damage or loose connections.
Industrial space illuminated by LED tubes with a 180-degree wide beam angle.
An industrial setting with LED tube lights providing uniform illumination across a wide area, indicated by a 180-degree beam angle graphic.
Diagram highlighting design features of Sunco Ballast Bypass Type B T8 LED tubes, including frosted lens and advanced LEDs.
폭발 view 다이어그램은 c를 보여줍니다asing the thoughtful design of the Sunco Ballast Bypass Type B T8 LED tubes, detailing the frosted lens, advanced LEDs, and compatibility with standard double-pin G13 bases.

7. 문제 해결

If you experience issues with your Sunco T8 LED tubes, please refer to the following common troubleshooting steps:

  • 표시등이 켜지지 않음:
    • 회로 차단기를 점검하여 전원이 켜져 있는지 확인하십시오.
    • 모든 배선 연결이 안전하고 올바른지 확인하십시오(4.2절 참조).
    • Ensure the LED tube is properly seated in the tombstones.
    • Confirm the ballast has been completely bypassed. These tubes are not compatible with ballasts.
  • 꺼질 것 같은:
    • Ensure the tubes are not connected to a dimmer switch, as these are non-dimmable.
    • 느슨한 전선 연결을 확인하세요.
  • 불균일한 밝기:
    • Verify all tubes are correctly installed and receiving power.
    • Ensure the fixture is clean and free of obstructions.

If issues persist after following these steps, please contact Sunco Lighting customer support.

8. 사양

특징사양
상표Sunco 조명
라이트 타입주도의
전구 모양 크기T8
왓tage18 와트
루멘 출력2200 LM
색온도5000K 일광
파워 타입Single Ended Power (SEP), Type B (Ballast Bypass)
기본 유형G13 베이스
렌즈 유형희게 센
호환성T8/T10/T12 Compatible
특징Instant On, Ballast Bypass
인증UL 인증

9. 보증 및 지원

Sunco Lighting stands behind the quality of its products. These T8 LED tubes come with a 7-year protection plan, ensuring peace of mind with your purchase. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support directly.

For more information, visit the official Sunco Lighting store: Sunco Lighting Store

관련 문서 - T8 LED 4-Foot Tube Light

사전view Sunco Lighting T8 LED 튜브 안정기 바이패스(B형) 설치 가이드
Sunco Lighting의 T8 LED 튜브 안정기 바이패스(B형)에 대한 종합적인 설치 가이드 및 설명서입니다. 간편한 설치 단계, 사양, 안전하고 올바른 설치를 위한 중요 경고 사항이 포함되어 있습니다.
사전view Sunco Lighting LED T8 직결 설치 가이드
Sunco Lighting LED T8 다이렉트 와이어 조명 설치에 대한 자세한 설명서amp본 문서에는 안정기 바이패스, 안전 예방 조치 및 단일 및 다중 라인 배선에 대한 내용이 포함되어 있습니다.amp 조명기구. 전기 기술자와 시설 관리자에게 필수품입니다.
사전view LED T8 하이브리드 15W 설치 설명서
Sunco Lighting의 LED T8 하이브리드 15W 튜브에 대한 종합적인 설치 가이드로, UL Type A(플러그 앤 고) 및 UL Type B(직접 배선/안정기 바이패스) 설치 방법을 모두 다루며, 안전 예방 조치 및 배선 다이어그램을 포함합니다.
사전view Emergency Tube Light - 4ft LED with 120-Minute Backup
Specifications and installation guide for the 4ft LED Emergency Tube Light, featuring 120 minutes of emergency operation, 1100lm brightness, and plug-and-play installation. Includes technical details, wiring diagrams, and operational tips.
사전view Sunco T8 Hybrid LED Tube User Manual: Installation and Troubleshooting
Comprehensive user manual for Sunco T8 Hybrid LED Tubes (Type A+B, Ballast Bypass). Includes installation guides for both with and without ballast, tombstone compatibility, wiring diagrams, product specifications, and troubleshooting tips.
사전view LED T8 슈퍼 하이브리드 ULamps 설치 지침
Sunco Lighting의 LED T8 Super Hybrid UL에 대한 포괄적인 설치 가이드ampA형(플러그 앤 고) 및 B형(직결) 설치 방법을 모두 다루는 설명서입니다. 안전 경고, 작동 모드 및 배선도가 포함되어 있습니다.