1. 서론
The Altronix R2416300UL is a rack mount power supply designed to provide 24VAC or 28VAC power for various applications, particularly commercial CCTV equipment. This unit features 16 individually fused outputs, ensuring reliable power distribution and protection. It is housed in a durable steel enclosure and includes a line cord, spare fuse, removable terminal blocks, and mounting brackets for convenient installation.
2. 중요한 안전 정보
Please read these safety instructions carefully before installing or operating the Altronix R2416300UL power supply. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.
- 감전 위험: Do not open the unit. Refer all servicing to qualified service personnel.
- 퓨즈 교체: For continued protection against fire, replace all fuses with the same type and rating (3.5A, 250V).
- 환경 조건: Do not expose the unit to rain or moisture. Install in a dry, indoor location.
- 통풍: 과열을 방지하기 위해 장치 주변에 적절한 환기를 확보하세요.
- 접지: 해당 지역의 전기 규정에 따라 장치가 올바르게 접지되었는지 확인하십시오.
- 전원: Connect the unit only to a 115VAC, 60Hz power source.
그림 1: 전면 view of the Altronix R2416300UL Rack Mount Power Supply. This image shows the black steel enclosure with the Altronix logo and 16 green LED indicators for each output. A caution label for electric shock is visible on the right.
3. 설정 및 설치
3.1. 풀기
Carefully remove the power supply from its packaging. Verify that all components are present: the R2416300UL unit, line cord, spare fuse, removable terminal blocks, and mounting brackets.
3.2. 장착
The R2416300UL is designed for rack mounting. Use the provided mounting brackets to secure the unit into a standard 19-inch equipment rack. Ensure the rack is stable and provides adequate support for the unit's weight (approximately 17.2 pounds).
3.3. 입력 전원 연결
- Ensure the power switch on the rear of the unit is in the "OFF" position.
- Connect the supplied line cord to the AC input receptacle on the rear of the power supply.
- Plug the other end of the line cord into a grounded 115VAC, 60Hz power outlet.
그림 2: 후면 view of the Altronix R2416300UL Rack Mount Power Supply. This image displays the power switch, AC input, and the array of 16 output terminal blocks. The product label with specifications is also visible.
3.4. 출력 연결
The R2416300UL provides 16 individually fused 24VAC or 28VAC outputs. Each output is equipped with a removable terminal block for easy wiring.
- Identify the desired output terminal block (labeled 1 through 16).
- Connect your device's power input wires to the corresponding terminals on the removable block. Ensure correct polarity if applicable to your device.
- Securely insert the wired terminal block into its receptacle on the power supply.
- Repeat for all devices requiring power.
Figure 3: Close-up of the rear product label and output terminal blocks. This image provides a detailed view of the product specifications, safety warnings, and the green removable terminal blocks for connecting output devices.
4. 사용 설명서
4.1. 전원 켜기 / 끄기
- To power on the unit, flip the power switch on the rear panel to the "ON" position.
- To power off the unit, flip the power switch on the rear panel to the "OFF" position.
4.2. Output Indicators
The front panel of the R2416300UL features 16 green LED indicators, one for each output. A lit green LED indicates that the corresponding output is receiving power and the fuse is intact.
Figure 4: Close-up of the front panel showing the 16 green LED indicators. Each LED corresponds to an individual fused output, providing a visual status of power delivery.
5. 유지관리
5.1. 일반 관리
- 제품을 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 청소할 때는 마른 부드러운 천을 사용하십시오.
- 환기구가 막히지 않았는지 확인하세요.
5.2. 퓨즈 교체
If an output LED is off, the corresponding fuse may be blown. To replace a fuse:
- 전원 끄기 : Disconnect the unit from the main power supply by unplugging the line cord.
- 끊어진 퓨즈를 확인하세요: Locate the fuse holder for the affected output on the rear panel.
- 퓨즈를 제거하세요: Carefully remove the blown fuse.
- 새 퓨즈를 설치하세요: Replace it with a new fuse of the exact same type and rating: 3.5A, 250V. Using an incorrect fuse can cause damage or fire.
- 복원력 : Reconnect the unit to the main power supply and turn it on. Verify the output LED illuminates.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No power to the unit (no LEDs lit). |
|
|
| One or more output LEDs are off. |
|
|
| Unit powers on, but connected devices do not function. |
|
|
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 알트로닉스 |
| 모델 번호 | R2416300UL |
| 입력 Voltage | 115VAC (Minimum 110V, Maximum 115V) |
| 입력 주파수 | 60Hz |
| 출력 볼륨tage | 24VAC 또는 28VAC |
| Output Current (24VAC) | 12.5A |
| Output Current (28VAC) | 10A |
| Number of Fused Outputs | 16 |
| 퓨즈 유형/정격 | 3.5A, 250V |
| 폼 팩터 | 랙 마운트 |
| 인클로저 재료 | 강철 |
| 마치다 | 검은색 |
| 제품 크기(L x W x H) | 19.13 x 8.5 x 3.27 인치 |
| 품목 무게 | 17.2 파운드 |
| 표준 | UL 2044 Commercial CCTV, CUL, CE |
| 냉각 방식 | 공기 |
8. 보증 및 지원
8.1. 보증 정보
Altronix products are typically backed by a limited lifetime warranty. For specific warranty terms and conditions applicable to your R2416300UL unit, please refer to the official Altronix web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
8.2. 기술 지원
For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact Altronix technical support. You can find their contact information on the official Altronix web사이트 (www.altronix.com).
