1. 서론
Welcome to the user manual for your Timex Expedition E-Altimeter T49791 Analog Watch. This timepiece is designed for durability and functionality, featuring an analog display, a robust stainless steel construction, and an integrated altimeter for outdoor enthusiasts. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your watch to ensure optimal performance and longevity.
그림 1.1: 앞쪽 view of the Timex Expedition E-Altimeter T49791 watch, showcasing its black dial, analog hands, and various sub-dials and markings for altimeter functions.
2. 안전 정보
- 방수 기능: This watch is water-resistant to 100 meters (330 feet). It is suitable for showering, swimming, and snorkeling. Do not operate the crown or pushers while the watch is wet or submerged to prevent water ingress.
- 배터리: The watch uses a CR2 battery. Do not attempt to open the watch case or replace the battery yourself unless you have the proper tools and expertise, as this may compromise water resistance and void the warranty. Consult an authorized service center.
- 온도: Avoid exposing the watch to extreme temperatures (below 0°C/32°F or above 60°C/140°F) or sudden temperature changes, which can affect accuracy and battery life.
- 약: Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the case, strap, or gaskets.
3. 설정
3.1 시간 및 날짜 설정
- 왕관을 뽑으세요: Gently pull the crown (located on the right side of the watch case) out to position 2. The second hand may stop.
- 시간 설정: Rotate the crown clockwise or counter-clockwise to move the hour and minute hands to the desired time. Ensure you set the correct AM/PM for the date change mechanism.
- 날짜 설정: Push the crown in slightly to position 1. Rotate the crown to adjust the date display. If the date changes at noon, advance the time by 12 hours.
- 크라운을 안으로 밀어 넣으세요: Once the time and date are set, push the crown back into position 0 (normal operating position). The second hand will resume movement.
그림 3.1: 옆 view of the watch showing the crown and pushers. The crown is used for time and date adjustments.
3.2 Altimeter Calibration
For accurate altitude readings, the altimeter must be calibrated regularly, especially when starting a new activity or after significant weather changes. The altimeter measures atmospheric pressure, which changes with both altitude and weather.
- Find Known Altitude: Locate your current altitude from a reliable source (e.g., a map, GPS device, or local sign).
- Activate Altimeter Mode: Refer to the watch's specific pusher functions (typically one of the side pushers) to enter altimeter calibration mode. The altimeter hand will likely point to its current reading.
- Adjust Altimeter: Use the designated pusher(s) to adjust the altimeter hand to match the known altitude.
- 교정 확인: Exit calibration mode. The altimeter is now calibrated to your current location.
그림 3.2: 옆 view of the watch, potentially showing the altimeter sensor port. Keep this port clear of debris for accurate readings.
4. 사용 설명서
4.1 독서 시간 및 날짜
The watch features a traditional analog display with hour, minute, and second hands. The date window is typically located at the 3 o'clock position.
4.2 고도계 사용하기
Once calibrated, the altimeter will display your current altitude. The specific method to activate and read the altimeter varies by model, but generally involves:
- Activating Altimeter: Press the designated altimeter pusher (refer to watch diagrams if available). The altimeter hand will move to indicate the current altitude.
- Reading Altitude: Read the altitude indicated by the altimeter hand against the corresponding scale on the dial.
- Returning to Time Mode: The watch may automatically return to time mode after a period, or you may need to press the pusher again.
메모: Altitude readings are based on atmospheric pressure and can be affected by weather changes. Recalibrate frequently for best accuracy.
4.3 인디글로 야간 조명
To illuminate the watch dial in low-light conditions, press and hold the crown (or a designated pusher, depending on the model). The INDIGLO night-light will activate, providing even illumination across the dial. Release the crown/pusher to turn off the light.
그림 4.1: The Timex Expedition watch worn on a wrist, demonstrating its size and appearance during use.
5. 유지관리
5.1 시계 청소
- 케이스 및 크리스탈: 부드러운 천으로 시계 케이스와 유리를 닦으세요.amp 천으로 닦아주세요. 잘 지워지지 않는 오염에는 순한 비누 용액을 사용한 후 깨끗한 물로 헹구고 완전히 말려주세요.
- 스테인리스 스틸 밴드: Clean the stainless steel band with a soft brush and mild soapy water. Rinse thoroughly and dry completely to prevent water spots or corrosion.
- 피하다: Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the watch's finish or seals.
5.2 배터리 교체
The watch is powered by a CR2 battery. When the battery is low, the second hand may skip seconds or stop entirely. Battery life typically ranges from 2 to 5 years, depending on usage of features like the altimeter and INDIGLO night-light.
It is highly recommended to have the battery replaced by an authorized Timex service center or a qualified watchmaker. This ensures that the correct battery type is used, and the watch's water resistance is maintained by properly sealing the case back.
그림 5.1: 뒤쪽 view of the Timex Expedition watch, showing the stainless steel case back and the watch band with its clasp open. The case back is where battery access is typically located.
5.3 방수 관리
To maintain the watch's 100-meter water resistance rating:
- Ensure the crown is fully pushed in at all times when the watch is wet or submerged.
- Do not operate the crown or pushers underwater.
- Have the gaskets checked and replaced periodically (e.g., every 2-3 years or during battery replacement) by a professional.
6. 문제 해결
- 시계가 실행되지 않음: 크라운이 완전히 눌려 있는지 확인하세요. 그렇다면 배터리를 교체해야 할 수도 있습니다.
- 잘못된 시간/날짜: Refer to Section 3.1 to reset the time and date. Ensure the crown is fully pushed in after setting.
- Inaccurate Altimeter Readings: The altimeter requires frequent calibration. Refer to Section 3.2. Significant weather changes can also affect readings.
- INDIGLO가 작동하지 않습니다: The battery may be low, or the function may not be activated correctly. Ensure the crown (or designated pusher) is pressed firmly.
- 시계 내부 물: If condensation or water appears inside the watch, immediately take it to an authorized service center. Do not attempt to dry it yourself.
7. 사양
그림 7.1: The Timex Expedition watch face with a measurement overlay, indicating its approximate dimensions in millimeters.
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | Timex Epedition E-Altimeter (T49791) |
| 이동 유형 | 석영 |
| 디스플레이 유형 | 비슷한 물건 |
| 다이얼 색상 | 검은색 |
| 케이스 소재 | 스테인리스 스틸 |
| 케이스 직경 | 50 밀리미터 |
| 밴드 소재 | 스테인리스 스틸 |
| 밴드 색상 | 은 |
| 방수성 | 100미터(330피트) |
| 배터리 유형 | CR1 배터리 2개(포함) |
| 제품 치수 | 3.99 x 10.01 x 5.99cm(40 x 100 x 60밀리미터) |
| 품목 무게 | 245g (0.54파운드) |
| 특별 기능 | Altimeter, INDIGLO Night-Light |
8. 보증 및 지원
8.1 제조업체 보증
This Timex Expedition E-Altimeter T49791 watch comes with a 1년 제조사 보증 구매일로부터 적용됩니다. 본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 한해 적용됩니다. 부적절한 취급, 사고, 무단 수리 또는 정상적인 마모로 인한 손상은 보증 대상에서 제외됩니다.
For warranty claims, please retain your proof of purchase and contact Timex customer service or an authorized service center.
8.2 고객 지원
For further assistance, detailed product information, or to locate an authorized service center, please visit the official Timex website or contact their customer support directly. You can often find contact information on the Timex web해당 웹사이트 또는 시계와 함께 제공된 포장재에 정보가 나와 있습니다.
그림 8.1: The packaging box for the Timex Expedition watch, which may contain additional warranty and support information.
