1. 서론
The Intermatic FM1STUZH-240U is a 24-hour electromechanical timer module designed for precise control of electrical loads. This module features a Single-Pole Double-Throw (SPDT) switch with a 21 Amp rating at 240V, making it suitable for various applications such as heating, ventilation, air conditioning, refrigeration, lighting, security, circulating pumps, spas, and other electrical loads requiring 24-hour scheduling. It includes a manual override switch for temporary control.
2. 안전 정보
경고: 감전 위험이 있습니다. 본 제품은 모든 국가 및 지역 전기 규정을 준수하여 자격을 갖춘 전기 기술자가 설치해야 합니다.
- 설치 또는 정비 작업을 하기 전에 회로 차단기 또는 퓨즈 박스에서 전원을 차단하십시오.
- Ensure all wiring connections are secure and comply with the device's ratings.
- Do not exceed the maximum load ratings of the timer.
- This timer is designed for indoor or outdoor enclosure mounting. Ensure the enclosure provides adequate protection for the environment.
3. 특징
- 권tage: 240VAC
- 스위치 유형: Single-Pole Double-Throw (SPDT)
- 스위치 등급 : 21 Amps Resistive @ 120-250 VAC, 2 HP @ 250 VAC, 1350 W Tungsten @ 240 VAC
- Timing Intervals: 96 captive trippers with 15-minute intervals for 24-hour programming.
- 터미널 : 1/4-inch quick-connect terminals for easy wiring.
- 운전하다: Synchronous drive for reliable timekeeping.
- 소음 면역성: Designed to be noise immune, suitable for robust applications.
- 재정의 Integrated manual override switch for temporary ON/OFF control.
- 씌우다: Clear plastic cover for protection and visibility.
- 컴팩트한 디자인: Space-saving dimensions for various installations.
4. 사양
| 사양 | 값 |
|---|---|
| 모델 번호 | FM1STUZH-240U |
| 공급량tage | 240VAC, 60Hz |
| 전력 소비 | 1VA |
| 스위치 유형 | SPDT(단극 쌍투) |
| 저항 등급 | 21A @ 120-250 VAC |
| 모터 등급 | 1 HP @ 120 VAC, 2 HP @ 250 VAC |
| 텅스텐 등급 | 1350W @ 240VAC |
| 최소 켜짐/꺼짐 시간 | 15분 |
| 배선 연결 | 1/4-inch Quick-Connect Terminals |
| 작동 온도 | -40°F ~ 185°F(-40°C ~ 85°C) |
| 치수(높이 x 너비 x 깊이) | 2.36" x 2.36" x 1.25"(60mm x 60mm x 32mm) |
| 설치 | 패널 실장 |
| 배터리 백업 | None (Synchronous drive) |
5. 설치
The FM1STUZH-240U timer module is designed for panel mounting within an appropriate enclosure. Ensure the enclosure provides adequate protection for the operating environment.
5.1 장착
Mount the timer module securely to the panel using appropriate fasteners. Refer to the product dimensions for proper cutout and spacing.
그림 1: 전면 view of the FM1STUZH-240U timer module, showing the 24-hour dial and manual override switch.
5.2 배선 연결
Before making any connections, ensure power is disconnected at the main circuit breaker. The timer module uses 1/4-inch quick-connect terminals. Refer to the wiring diagram below and the labels on the timer for correct connections.
그림 2: 뒤로 view of the FM1STUZH-240U timer module, showing the quick-connect terminals for wiring.
터미널 연결:
- INPUT (L1, L2): Connect the 240 VAC power supply to these terminals.
- M (Motor): These terminals are for the internal synchronous motor. Connect the 240 VAC power supply to these terminals as well, typically in parallel with the INPUT terminals.
- COM(공통): This is the common terminal for the SPDT switch.
- 아니오(보통 열려 있음): This terminal is connected to COM when the timer is ON.
- NC (일반적으로 닫힘): This terminal is connected to COM when the timer is OFF.
Connect the load according to your application's requirements, utilizing the COM, NO, and NC terminals as needed. Always verify connections before restoring power.
6. 설정
6.1 현재 시간 설정
- Rotate the dial clockwise until the current time aligns with the time arrow (indicator mark) on the timer face.
- The dial is marked in 24-hour format (e.g., 12 = noon, 18 = 6 PM, 24/0 = midnight).
6.2 켜짐/꺼짐 시간 설정
The timer dial has 96 captive trippers, each representing 15 minutes. To set ON/OFF times:
- Push the trippers outward for the periods you want the load to be ON.
- Leave the trippers inward for the periods you want the load to be OFF.
- Each pushed-out tripper will activate the switch for 15 minutes.
7. 운영
7.1 자동 작동
Once the current time and ON/OFF trippers are set, the timer will automatically switch the connected load according to the programmed schedule. The dial will continuously rotate, and the internal switch will change state as the trippers engage or disengage.
7.2 수동 오버라이드
The FM1STUZH-240U includes a manual override switch for temporary control of the connected load, independent of the programmed schedule. The override switch has three positions:
- 에: Forces the load to remain ON.
- OFF : Forces the load to remain OFF.
- Automatic (Center Position): Allows the timer to operate according to the programmed schedule.
To use the manual override, simply move the switch to the desired position. Remember to return it to the automatic (center) position for programmed operation to resume.
8. 유지관리
The Intermatic FM1STUZH-240U timer module is designed for long-term, reliable operation with minimal maintenance.
- 청소: Periodically clean the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the clear plastic cover is free from dust or debris that might obstruct visibility.
- 점검: Annually inspect the wiring connections for tightness and signs of wear or corrosion. Ensure the timer dial rotates freely and the trippers engage correctly.
- 배터리: This synchronous timer model does not utilize a battery backup and therefore requires no battery maintenance or replacement.
Always disconnect power before performing any inspection or cleaning inside the enclosure.
9. 문제 해결
If the timer module is not functioning as expected, perform the following basic checks:
- 로드할 전원 없음:
- Check if the circuit breaker is tripped or the fuse is blown.
- Verify that the timer is receiving 240 VAC power at the INPUT and M terminals.
- Ensure the manual override switch is in the 'Automatic' position.
- Confirm that the ON trippers are correctly set for the desired ON period.
- Check wiring connections to the load (COM, NO, NC terminals).
- Timer Dial Not Rotating:
- Verify that the timer is receiving 240 VAC power at the INPUT and M terminals.
- Ensure there are no obstructions preventing the dial from rotating.
- 잘못된 전환 시간:
- Check that the current time is accurately set on the dial.
- Review the position of the ON/OFF trippers to ensure they correspond to the desired schedule.
- Manual Override Not Working:
- Ensure the switch is fully engaged in the ON or OFF position.
If issues persist after performing these checks, it is recommended to contact a qualified electrician or Intermatic customer support for further assistance.
10. 보증 및 지원
For warranty information and technical support, please refer to the official Intermatic web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
- 제조업체: 인터매틱 주식회사
- Web대지: www.intermatic.com
