베링거 B112D

베링거 EUROLIVE B112D 액티브 PA 스피커 시스템 사용 설명서

모델: B112D | 브랜드: 베링거

소개

The Behringer EUROLIVE B112D is an active 2-way PA speaker system designed for live sound, public address, and stage monitoring applications. It features a powerful Class-D amplifier, an integrated sound processor, and a versatile trapezoidal enclosure. This manual provides essential information for the safe and efficient operation of your speaker system.

주요 특징:

  • Integrated sound processor for ultimate system control and speaker protection.
  • 내부 스위칭 모드 전원 공급 장치를 통해 잡음 없는 오디오, 뛰어난 과도 응답 및 매우 낮은 전력 소비를 구현합니다.
  • 고주파(HF) 및 저주파(LF) 보호 기능이 내장되어 있습니다.
  • Integrated Pole Mount for stand mounting.

설정

포장 풀기 및 검사:

Carefully unpack your EUROLIVE B112D speaker system. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, do not use the unit and contact your dealer immediately.

놓기:

The versatile trapezoidal enclosure design allows for various positioning options:

  • 스탠드 장착: Use the integrated 35-mm pole socket to mount the speaker on a standard speaker stand for optimal sound dispersion.
  • 플로어 모니터: Tilt the speaker on its side for use as a floor monitor, providing ideal angle for onstag전자 애플리케이션.
  • 스태킹 : The design allows for stable stacking on another unit or a subwoofer.

전원 연결:

Connect the provided power cord to the IEC power inlet on the rear panel of the speaker and then to a suitable AC power outlet. Ensure the power switch is in the OFF position before connecting to power.

오디오 연결:

The B112D features a variety of input and output options on its rear panel:

  • 마이크/라인 입력: Features an ultra-low noise Mic/Line input with Volume control and Clip LED. This input accepts both XLR and 1/4" (6.35mm) TRS connectors.
  • 무선 옵션: The speaker is equipped with a wireless option for connecting wireless microphones (wireless system sold separately).
  • 링크 출력: An additional XLR Line output allows for linking of additional speaker systems, enabling easy expansion of your sound setup.
Behringer EUROLIVE B112D Active PA Speaker System

그림 1: 전면 view of the Behringer EUROLIVE B112D Active PA Speaker System, showcasing the 12-inch woofer and horn tweeter.

작동 지침

전원 켜기/끄기:

Ensure all connections are secure before powering on. Flip the POWER switch on the rear panel to the ON position. To power off, flip the switch to the OFF position.

소리 조정:

The B112D features an integrated mixer with dedicated controls:

  • 볼륨 조절: Use the LEVEL knob to adjust the overall input volume. Monitor the CLIP LED to ensure the signal is not distorting (red indicates clipping).
  • 2밴드 EQ: Utilize the HIGH and LOW equalizer knobs to fine-tune the sound. Adjust these to achieve the desired tonal balance for your audio.

Using the Wireless Option:

The EUROLIVE B112D is ready for use with Behringer's ULTRALINK ULM series wireless microphones. Refer to the ULM series manual for detailed instructions on pairing and operation.

Linking Multiple Speakers:

For larger venues or stereo setups, connect the LINK OUTPUT XLR connector of one B112D speaker to the input of another active speaker. This allows for easy daisy-chaining of multiple units.

유지

To ensure the longevity and optimal performance of your Behringer EUROLIVE B112D, follow these maintenance guidelines:

  • 청소: Regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • 저장: 스피커는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
  • 점검: 모든 케이블과 연결부의 마모 또는 손상 여부를 주기적으로 점검하십시오.

문제 해결

If you encounter issues with your EUROLIVE B112D, refer to the following common troubleshooting steps:

  • 전원 없음: Ensure the power cord is securely connected to both the speaker and a working power outlet. Check the power switch position and any external circuit breakers.
  • 소리 없음: Verify that the input source is active and sending a signal. Check all audio cable connections. Ensure the LEVEL knob on the speaker is turned up and not muted.
  • 왜곡된 소리: Reduce the input volume from your source device and/or the LEVEL knob on the speaker. If the CLIP LED is red, the signal is too high. Check for damaged cables.
  • 윙윙거리는 소리 또는 소음: Ensure all cables are properly shielded and connected. Try using balanced XLR cables for longer runs. Check for ground loops.

명세서

특징세부 사항
장착 유형플로어 스탠딩
재료알류미늄
모델명유로라이브 B112D
스피커 유형집 밖의
제품의 권장 용도For Live Sound, Public Address, Stage 모니터링
서브우퍼 직경15 인치
단위 수1.0 카운트
색상검은색
제품 치수13.19인치 깊이 x 17.32인치 너비 x 27.17인치 높이
품목 무게32 파운드
임피던스8옴
보증 유형제한된
항목 수1
제어 방법만지다
스피커 크기15 인치
전원코드식 전기
우퍼 직경15 인치
트위터 직경1 인치
오디오 드라이버 유형동적 드라이버
블루투스 범위10 미터
오디오 드라이버 크기15 인치
출력 와트tage550 와트
권tage240 볼트
왓tage600 와트
연결 기술열광한

상자 안에 무엇이 들어있나요?

  • 1 x Behringer EUROLIVE B112D 550W 15" Powered Speaker
  • 전원 코드
  • 사용 설명서 (본 문서)

보증 및 지원

The Behringer EUROLIVE B112D comes with a limited warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official Behringer web사이트를 방문하거나 공인 딜러에게 문의하세요.

관련 문서 - B112D

사전view 베링거 EUROLIVE B115D/B112D 빠른 시작 가이드 - 액티브 PA 스피커 시스템
베링거 EUROLIVE B115D 및 B112D 1000W 액티브 2웨이 PA 스피커 시스템(무선 옵션 및 통합 믹서 포함)의 빠른 시작 가이드입니다. 설치, 제어, 사양 및 보증 정보가 포함되어 있습니다.
사전view 베링거 EUROLIVE B115D/B112D 빠른 시작 가이드
베링거 EUROLIVE B115D 및 B112D 액티브 PA 스피커 시스템의 설치 및 작동에 대한 간략한 안내서입니다. 안전 지침, 연결 다이어그램, 제어 설명, 시작 단계 및 기술 사양을 포함합니다.
사전view Behringer EUROLIVE B115MP3/B112MP3 빠른 시작 가이드
베링거 EUROLIVE B115MP3/B112MP3 액티브 2웨이 PA 스피커 시스템을 빠르게 시작해 보세요. 이 가이드에서는 연결, 조작법, 시작 방법 및 PA 스피커 시스템 사양을 다룹니다.
사전view Behringer EUROLIVE B115D/B112D 빠른 시작 가이드: PA 스피커 시스템
Behringer EUROLIVE B115D/B112D 액티브 2웨이 PA 스피커 시스템을 빠르게 사용해 보세요. 이 가이드에서는 안전, 연결, 제어, 설치 및 사양에 대해 설명합니다.
사전view 베링거 EUROLIVE B115MP3/B112MP3 PA 스피커 시스템 빠른 시작 가이드
베링거 EUROLIVE B115MP3/B112MP3 액티브 PA 스피커 시스템을 위한 종합적인 빠른 시작 가이드입니다. 안전 지침, 연결 다이어그램, 제어 설명, 시작 단계 및 사양을 다룹니다. 1000W 출력이 특징입니다. amp앰프, MP3 플레이어, 무선 기능.
사전view Behringer EUROLIVE B115W/B112W 빠른 시작 가이드 - PA 스피커 시스템
Behringer EUROLIVE B115W/B112W 액티브 PA 스피커 시스템을 사용해 보세요. 강력한 사운드 강화를 위한 Bluetooth 연결, 통합 믹서, 무선 마이크 옵션에 대해 알아보세요.