소개
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your TetraPond Water Garden Pump, Model 26588. This pump is designed to power waterfalls, filters, and fountain heads in water gardens and ponds ranging from 500 to 1000 gallons. Please read these instructions thoroughly before use and retain them for future reference.
중요 안전 지침
- 모든 지침을 읽으십시오. Before operating the pump, carefully read and understand all safety warnings and operating instructions.
- 전기 안전:
- 유지관리나 청소를 하기 전에는 반드시 펌프의 전원을 분리하세요.
- Ensure the power cord is not damaged. Do not operate the pump with a damaged cord or plug.
- Connect to a properly grounded, GFCI (Ground Fault Circuit Interrupter) protected outlet.
- 플러그에서 접지 단자를 제거하지 마십시오.
- The pump is designed for 120 Volts AC.
- 수중에서만 사용 가능: This pump is designed exclusively for submersible operation. Do not run the pump dry.
- 놓기: Ensure the pump is placed on a stable surface within the pond to prevent it from tipping over.
- 어린이와 애완동물: Keep children and pets away from the pond area and electrical connections.
- 물의 온도: Do not use the pump in water exceeding 95°F (35°C).
패키지 내용
- TetraPond Water Garden Pump (Model 26588)
- 1-inch ID (Inner Diameter) Adapter
설정 및 설치
- 짐 풀기: Carefully remove all components from the packaging. Inspect the pump for any signs of damage.
- 어댑터 연결: Attach the provided 1-inch ID adapter to the pump's outlet. Ensure a secure fit.
- 배관 연결: Connect appropriate tubing (not included) to the 1-inch ID adapter. For optimal flow, use tubing with an inner diameter matching the adapter. Secure the tubing with a hose clamp (누출 방지를 위해 포함되지 않음).
- Placement in Pond:
Place the pump on a stable, level surface at the bottom of your pond. Ensure it is fully submerged in water. Avoid placing it directly in heavy sludge or debris, which can clog the intake.
이미지: 앞면 view of the TetraPond Water Garden Pump, showing its compact design and outlet.
이미지: 측면 view of the TetraPond Water Garden Pump, illustrating the hose adapter connection point.
- 전기 연결: Route the 12-foot power cord to a GFCI-protected electrical outlet. Ensure the cord is not pinched or damaged. Plug in the pump only after it is fully submerged and all connections are secure.
작업
Once the pump is installed and connected, plug it into the GFCI-protected outlet. The pump will begin to circulate water. The flow rate of the pump is rated at 1000 GPH (Gallons Per Hour) at zero head height. The actual flow rate will decrease as the vertical distance (head height) the water is pumped increases.
- Waterfalls: For waterfalls, approximately 1 inch of waterfall width is achieved for every 100 GPH of flow. Adjust the pump's position or the tubing to achieve desired waterfall effects.
- Fountain Heads: If using fountain heads (not included), attach them securely to the pump's outlet or a diverter valve.
- 필터: This pump can be used to power external filters. Ensure the filter is compatible with the pump's flow rate.
Image: Flow performance chart illustrating how gallons per hour (GPH) decrease with increasing pumping height for various TetraPond pump models, including WGP1000.
Image: Diagram showing the operational flow of a TetraPond Water Garden Pump, from water intake to filtration and discharge through a fountain or waterfall.
유지
Regular maintenance ensures the longevity and optimal performance of your pump. Always disconnect the pump from the power supply before performing any maintenance.
- 임펠러 청소:
Over time, debris can accumulate around the impeller, reducing pump efficiency. To clean:
- 펌프의 플러그를 뽑습니다.
- 연못에서 펌프를 꺼내세요.
- Carefully remove the pump housing or intake screen to access the impeller.
- Remove any debris (leaves, algae, etc.) from the impeller and its chamber.
- 깨끗한 물로 모든 부품을 헹굽니다.
- 펌프를 다시 조립하고 모든 부품이 제자리에 단단히 고정되었는지 확인하십시오.
이미지: 상세 view of the pump's impeller and magnetic rotor assembly, crucial for water movement.
- Cleaning the Intake Screen: Periodically check and clean the intake screen to prevent clogging. A clogged screen will reduce water flow.
- 겨울철 : In freezing climates, remove the pump from the pond before temperatures drop below freezing. Clean the pump thoroughly and store it in a frost-free location submerged in a bucket of water to keep seals moist, or follow specific manufacturer guidelines for dry storage.
문제 해결
If your pump is not operating correctly, refer to the following common issues and solutions. Always disconnect power before inspecting the pump.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Pump does not start or runs intermittently. |
|
|
| 물 흐름 감소. |
|
|
| 펌프에 소음이 있습니다. |
|
|
For more detailed troubleshooting, refer to the specific "Troubleshooting and Cleaning Your Pump guides" available from Tetra.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 26588 |
| Pond Size Capacity | 500~1000갤런 |
| 최대 유량 | 1000 GPH (Gallons Per Hour) / 31.67 GPM (Gallons Per Minute) |
| 최대 들어올리기 높이(머리) | 7.1 피트 |
| 권tage | 120 볼트 |
| 전원 | 코드식 전기 |
| 제품 크기(L x W x H) | 8인치 x 6.25인치 x 8.88인치 |
| 품목 무게 | 4.46파운드 |
| 재료 | 플라스틱 |
| 스타일 | 잠수 가능 |
| 어댑터 포함 | 1-inch ID |
보증 정보
The TetraPond Water Garden Pump (Model 26588) comes with a 3년 한정 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the official Tetra web사이트를 방문하거나 고객 지원팀에 문의하세요.
고객 지원
For further assistance, technical support, or warranty inquiries, please contact Tetra customer service. Visit the official Tetra web연락처 정보와 추가 자료는 해당 사이트를 참조하세요.
참고: 제품 사양은 예고 없이 변경될 수 있습니다.
