1. 서론
Thank you for choosing the Edlund Model 401 Electric Knife Sharpener. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new sharpener. Please read all instructions carefully before use to ensure optimal performance and longevity of the product.
The Edlund Model 401 is designed for professional results, featuring a removable guidance system for easy cleaning and a precise guidance system to maintain a perfect edge on various knife types, including scalloped-edged bread knives.
Figure 1: The Edlund Model 401 Electric Knife Sharpener, showcasing its stainless steel case and blue guidance system.
2. 중요 안전 지침
전기 제품을 사용할 때는 화재, 감전, 부상의 위험을 줄이기 위해 항상 기본적인 안전 예방 조치를 따라야 합니다.
- Read all instructions before operating the sharpener.
- 샤프너를 물이나 기타 액체에 담그지 마십시오.
- 사용하지 않을 때, 부품을 장착하거나 분리하기 전, 세척하기 전에는 콘센트에서 플러그를 뽑아두세요.
- 움직이는 부품과의 접촉을 피하세요.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer support for examination, repair, or adjustment.
- 제조업체에서 권장하거나 판매하지 않는 부착물을 사용하면 화재, 감전 또는 부상이 발생할 수 있습니다.
- 옥외에서는 사용하지 마십시오.
- 코드가 테이블이나 카운터 가장자리에 걸려 있거나 뜨거운 표면에 닿지 않도록 하세요.
- Knives are sharp. Handle with care.
- Ensure the sharpener is placed on a stable, flat surface during operation.
- Keep fingers clear of the sharpening slots during operation. The 3/16" width knife opening is designed for safety, but caution is still required.
3. 패키지 내용
구성품이 모두 들어있고 양호한 상태인지 확인해주세요.
- Edlund Model 401 Electric Knife Sharpener (1 unit)
- Removable Guidance System (pre-installed)
- 사용 설명서 (본 문서)
4. 설정
- 짐 풀기: Carefully remove the sharpener from its packaging. Retain packaging for future storage or transport.
- 놓기: Place the sharpener on a clean, dry, stable, and level surface. Ensure there is adequate space around the unit for safe operation and ventilation.
- 전원 연결: Ensure the power switch is in the "OFF" position. Plug the power cord into a standard 115V/60Hz electrical outlet.
- 점검: Before first use, inspect the unit for any visible damage. Ensure the removable guidance system is properly seated.
5. 사용 설명서
The Edlund Model 401 features a two-stage sharpening process: a coarse grit for initial sharpening and a medium grit for honing and finishing. The precise guidance system ensures consistent blade angles.
- 전원 켜기: Flip the lighted rocker switch to the "ON" position. The light will illuminate, indicating the motor is running.
- 샤프닝 Stage 1 (거친):
- Hold the knife with the blade facing away from you.
- Insert the knife blade into the coarse sharpening slot (typically the slot furthest from the power switch) at the heel of the blade.
- Draw the knife slowly and steadily towards you, maintaining light, even pressure. The guidance system will hold the blade at the correct angle.
- Repeat this process 3-5 times for each side of the blade, alternating sides.
- 샤프닝 Stage 2 (Medium/Honing):
- Move the knife blade to the medium/honing slot (typically the slot closer to the power switch).
- Draw the knife slowly and steadily towards you, applying very light pressure.
- Repeat this process 1-2 times for each side of the blade, alternating sides, to refine the edge.
- Testing the Edge: Carefully test the sharpness of the blade. If not sufficiently sharp, repeat the honing stage.
- Scalloped Edged Knives: For scalloped or serrated knives, use only the medium/honing slot. Draw the knife through the slot with very light pressure, focusing on sharpening the points of the serrations. Do not use the coarse slot for serrated knives.
- 전원 끄기 : Once sharpening is complete, flip the rocker switch to the "OFF" position and unplug the unit.
Figure 2: A knife being sharpened in the Edlund Model 401, demonstrating the proper insertion into the guidance system.
6. 유지관리 및 청소
Regular cleaning ensures optimal performance and extends the life of your sharpener.
- 청소하기 전에 플러그를 뽑으세요: Always ensure the sharpener is unplugged from the power outlet before cleaning.
- Removing the Guidance System: The ABS plastic knife guide is designed to pop out for easy cleaning. Gently pull the blue guidance system upwards and outwards to detach it from the main unit.
- Cleaning the Guidance System: Wash the removable guidance system with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reattaching.
- 장치 청소: Wipe the exterior of the sharpener with a damp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
- Reattaching the Guidance System: Align the guidance system with the slots on the sharpener and press down firmly until it clicks securely into place.
- Sharpening Wheel Cleaning: Over time, metal particles may accumulate on the sharpening wheels. While the guidance system is removed, you can gently brush the wheels with a stiff, non-metallic brush to remove debris. Do not use water directly on the sharpening wheels.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 연필깎이가 켜지지 않습니다. | 플러그가 꽂혀 있지 않음; 전원 스위치가 꺼져 있음; 콘센트에 전원이 공급되지 않음. | Ensure unit is securely plugged in. Flip power switch to "ON". Check outlet with another appliance. |
| Knife not sharpening effectively. | Incorrect technique; sharpening wheels worn; excessive pressure; blade not clean. | Review operating instructions for proper technique. Apply light, even pressure. Clean the blade before sharpening. If wheels are worn, contact customer support for replacement. |
| Sharpening stone appears misaligned. | Guidance system not properly seated; internal component shift. | Ensure the removable guidance system is securely reattached. If the issue persists after re-seating, discontinue use and contact customer support. |
| 작동 중 소음이 너무 심함. | Debris in sharpening slots; internal malfunction. | Unplug the unit and carefully inspect slots for debris. Clean the guidance system. If noise continues, discontinue use and contact customer support. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 401 |
| 상표 | 에드런드 |
| 힘 | 115 Volts / 60Hz Single Phase |
| 모터 속도 | 1550 RPM |
| 재료 | Stainless Steel Case, Acrylonitrile Butadiene Styrene (ABS) Guidance System |
| 치수(길이 x 너비 x 높이) | 9.75인치 x 4인치 x 4.75인치 |
| 품목 무게 | 10.5 파운드 |
| 그릿 유형 | Coarse, Medium |
| Knife Opening Width | 3/16" (for safety) |
| 인증 | NSF 인증 |
Figure 3: Dimensions of the Edlund Model 401 Electric Knife Sharpener.
9. 보증 정보
Edlund products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Edlund web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
This warranty typically covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, alteration, or unauthorized repair.
10. 고객 지원
If you have any questions, require assistance, or need to order replacement parts, please contact Edlund customer support:
- Web대지: www.edlundco.com (공식을 확인하세요 web(최신 연락처 정보는 해당 사이트를 참조하십시오.)
- 핸드폰: 공식 참조 web현재 전화번호를 확인하려면 사이트 또는 제품 포장을 참조하십시오.
- 이메일: 공식 참조 website for current email contact.
고객 지원팀에 문의하실 때는 제품 모델 번호(401)와 구매일자를 준비해 주시기 바랍니다.
