1. 제품 오버view
The Bosch PWS 600 Angle Grinder is a versatile power tool designed for various tasks including grinding, cutting, brushing, and sanding. Its ergonomic design and powerful 600W motor make it suitable for working with metal, stone, and wood surfaces. Key features include a tool-free adjustable protective guard, spindle lock for easy accessory changes, and an anti-vibration handle for enhanced user comfort.
Image 1: The Bosch PWS 600 Angle Grinder held in hand, demonstrating its compact design and auxiliary handle.
2. 안전 정보
전동 공구를 사용할 때는 항상 안전을 최우선으로 고려해야 합니다. 이 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.
일반 안전 경고:
- 모든 안전 경고 및 지침을 읽으세요: 사용하기 전에 도구와 작동법을 숙지하십시오.
- 개인 보호 장비(PPE)를 착용하십시오. Always wear safety glasses, sturdy footwear, and protective gloves. A dust mask and hearing protection are also recommended depending on the application.
- 작업 공간을 깨끗하고 밝은 상태로 유지하십시오. 어수선하거나 어두운 곳은 사고를 초래합니다.
- 작업물을 고정하세요: cl을 사용하세요amp공작물을 단단히 고정하기 위해 바이스나 공구를 사용하십시오.
- 우발적인 시작 방지: 전원을 연결하거나, 공구를 들거나, 운반하기 전에 스위치가 꺼짐 위치에 있는지 확인하십시오.
- 지나치지 마십시오: 항상 적절한 발판과 균형을 유지하십시오.
Angle Grinder Specific Safety:
- 올바른 액세서리를 사용하세요: Only use grinding, cutting, or brushing accessories that are rated for the tool's speed and are correctly sized (115 mm maximum disc diameter).
- Ensure guard is properly installed: The protective guard must be securely in place and adjusted to cover the maximum possible part of the disc.
- Be aware of sparks: Grinding and cutting operations produce sparks. Keep flammable materials away from the work area.
- Prevent kickback: Always hold the tool firmly with both hands. Avoid situations where the disc can bind or get pinched.
3. 설정
3.1 보조 핸들 부착
The auxiliary handle can be screwed into either the left or right side of the gear head, depending on user preference and application. Ensure it is tightened securely before operation.
3.2 Installing and Adjusting the Protective Guard
The PWS 600 features a tool-free adjustable protective guard. To adjust:
- Loosen the locking lever on the guard.
- 스파크와 파편으로부터 보호하려면 보호 덮개를 원하는 위치로 돌리십시오.
- Securely tighten the locking lever. The guard's coding prevents incorrect mounting.
3.3 Mounting Grinding/Cutting Discs
To change or install a disc:
- Ensure the tool is unplugged from the power supply.
- Press and hold the spindle lock button located on the gear head.
- Use the supplied spanner wrench to loosen the clamping nut and remove the old disc. If using an optional tool-free (SDS-click) nut, simply unscrew it by hand.
- Place the new disc onto the spindle, ensuring it is correctly seated.
- cl을 조여주세요amping nut firmly with the spanner wrench while holding the spindle lock button. For SDS-click nuts, tighten by hand.
- 스핀들 잠금 버튼을 놓습니다.
4. 사용 설명서
4.1 켜기/끄기
- 켜려면: Slide the on/off switch (located on the top of the tool) forward until it locks into the 'ON' position.
- 끄려면: Press the rear part of the on/off switch to release it to the 'OFF' position.
4.2 일반 작업
Hold the angle grinder firmly with both hands, utilizing the main handle and the auxiliary handle. The anti-vibration handle contributes to reduced fatigue during extended use. Allow the disc to reach full speed before making contact with the workpiece. Apply moderate pressure and move the tool smoothly across the surface.
4.3 응용 프로그램
- 연마: Ideal for quickly grinding metal surfaces. Use a grinding disc and move the tool at a slight angle to the workpiece.
Image 2: Grinding a metal grate with the PWS 600, illustrating the sparks generated during operation.
- 절단: Suitable for cutting metal profiles, pipes, stone slabs, and tiles (with appropriate diamond cutting disc, sold separately). Ensure the cutting disc is perpendicular to the workpiece.
Image 3: Cutting a metal pipe using the PWS 600, demonstrating precision cutting capabilities.
- 브러싱: Use a wire brush attachment for cleaning rust, paint, or other coatings from metal surfaces.
Image 4: Using the PWS 600 with a wire brush to remove rust from a metal gate, showcasin다재다능함.
- 샌딩 : With a sanding plate and appropriate sandpaper (sold separately), the tool can be used for rapid sanding on wooden or metal surfaces.
5. 유지관리
5.1 청소
Regularly clean the ventilation slots of the tool to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.
5.2 Accessory Inspection
Before each use, inspect grinding, cutting, or brushing accessories for damage, cracks, or excessive wear. Replace damaged accessories immediately.
5.3 보관
공구를 어린이의 손이 닿지 않는 건조하고 안전한 장소에 보관하십시오. 보관 시 전원 코드가 꼬이거나 손상되지 않도록 주의하십시오.
6. 문제 해결
도구가 시작되지 않습니다.
- 전원 코드가 작동하는 콘센트에 단단히 꽂혀 있는지 확인하세요.
- Ensure the on/off switch is fully engaged in the 'ON' position.
- 전원 코드에 눈에 띄는 손상이 있는지 검사하십시오.
과도한 진동:
- Check if the grinding/cutting disc is correctly mounted and tightened.
- 디스크에 손상이나 불균형이 있는지 검사하고 필요한 경우 교체하십시오.
- Ensure the auxiliary handle is securely fastened.
For issues not resolved by these steps, contact authorized Bosch service personnel.
7. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 보쉬 |
| 모델 번호 | 0603411070 |
| 전원 | 전기 유선 |
| 왓tage | 600 와트 |
| 최대 회전 속도 | 11000 RPM |
| 디스크 직경 | 115mm (XNUMXmm) |
| 재료 | Aluminum (gear housing) |
| 색상 | 검정 / 녹색 |
| 품목 치수(L x W x H) | 대략. 36.6 x 12.2 x 11.8cm |
| 품목 무게 | 2.32kg |
8. 보증 및 지원
8.1 보증 정보
Bosch power tools are manufactured to high-quality standards and undergo rigorous testing. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and registration details. Keep your proof of purchase for warranty claims.
8.2 고객 지원
For technical assistance, spare parts, or service, please contact your local authorized Bosch service center or visit the official Bosch website for contact information in your region. When contacting support, please have your model number (PWS 600) and serial number (if applicable) ready.
