Himalayan Glow Salt Lamp

About Your Himalayan Salt Lamp

Your Himalayan Glow Salt Lamp is crafted from natural salt crystals sourced from the Himalayan Mountains. Each lamp is individually hand-carved, making every piece unique in shape and color. It features a beautiful Neem wood base and comes equipped with a 15-watt light bulb and a unique patented fire-resistant dimmer switch on a 6.6-foot electric cord. All components are manufactured according to UL standards, ensuring safety and quality.

A Himalayan Glow Salt Lamp, 보여 주다asing its natural, irregular shape and warm amber glow.

안전 정보

Please read and understand all safety instructions before using your salt lamp. Failure to do so may result in injury or damage to the product.

• 경고: Consuming this product can expose you to chemicals including lead, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/food.
• Use a maximum 25-watt bulb for the salt crystal lamp. Only use bulbs suggested for salt lamps.
• Remove the polybag and bulb cover before plugging in the lamp.
• Ensure the cord plug, salt lamp, and entire product are dry before plugging it in.
• l을 떠나지 마십시오amp cord on or near carpet, paper, fabric, or anything flammable.
• 항상 l을 배치하십시오.amp on a stable, flat surface. Keep out of reach of children and pets.
• Due to the natural properties of Himalayan Salt, if you experience moisture on the product, it is normal and not a defect. Before using, clean it with a dry towel.
• l을 켜다amp for 24 hours when first using it to dry out any moisture it may have retained.

Important safety warnings regarding bulb wattage and moisture.

무엇이 포함됩니까?

Your Himalayan Glow Salt Lamp 패키지에는 다음 항목이 포함됩니다.

• 1 x Himalayan Salt Night Lamp with Dimmable Switch
• 1 x 15-watt Light Bulb
• 1 x Electric Cord
• 1 x 사용자 매뉴얼(이 문서)

설치 가이드

짐 풀기

포장에서 모든 구성품을 조심스럽게 꺼내십시오. 내용물을 검사하십시오.amp and all accessories for any signs of damage. If any part is damaged or missing, do not proceed with setup and contact customer support.

전구 설치

난amp comes with a pre-installed 15-watt bulb. To access or replace the bulb, gently pull the plastic light assembly from the bottom of the salt crystal. Insert the E12 base 15-watt bulb into the socket. Ensure the bulb is securely seated before reinserting the assembly into the lamp의 기지.

The back of the salt lamp, illustrating the area where the light assembly is inserted into the wooden base.

놓기

Place your salt lamp on a flat, stable, and dry surface. Due to the hygroscopic nature of salt, it may attract moisture, especially in humid environments. Avoid placing it directly on sensitive wooden surfaces without a protective mat or coaster. Ensure the lamp is placed where the cord will not be a tripping hazard and is away from flammable materials.

작동 지침

켜기/끄기

l을 꽂으세요amp전원 코드를 표준 120V 콘센트에 꽂으세요.amp features an inline dimmer switch on the cord. To turn the lamp on or off, rotate the knob on the dimmer switch until you hear a click.

Using the Dimmer Switch

일단 내가amp is on, rotate the dimmer knob to adjust the brightness level. Turning the knob clockwise will increase the brightness, while turning it counter-clockwise will decrease it. This allows you to customize the ambiance to your preference, from a soft night light to a brighter accent light.

The inline dimmer switch allows for adjustable brightness, creating a warm glow for various settings.

관리 및 유지 보수

청소

To clean your salt lamp, unplug it from the power source. Gently wipe the surface of the salt crystal with a dry cloth or sponge. Do not use water or liquid cleaners, as salt is hygroscopic and will dissolve. If the lamp appears to be 'sweating' or moist, turn it on for several hours to allow the heat from the bulb to dry the surface.

전구 교체

전구를 교체해야 하는 경우 l을 확인하십시오.amp is unplugged and the bulb has cooled down. Gently pull the light assembly from the base of the lamp. Unscrew the old bulb and screw in a new E12 base, 15-watt incandescent bulb. Carefully reinsert the light assembly into the lamp의 기지.

The underside of the salt lamp, revealing the light bulb housing within the wooden base.

문제 해결

If you encounter issues with your Himalayan Glow Salt Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.

• Lamp 불이 켜지지 않음:
  • Check if the power cord is securely plugged into both the lamp 그리고 전기 콘센트.
  • Ensure the dimmer switch is turned to the 'on' position (you should hear a click).
  • Verify that the light bulb is properly screwed into the socket and is not burnt out. Replace if necessary.
  • 다른 장치로 콘센트를 테스트하여 제대로 작동하는지 확인하세요.
• Lamp is 'Sweating' or Leaking Water:
  • This is a natural property of salt lamps, especially in humid environments. It is not a defect.
  • l을 돌려라amp on for 24 hours to allow the heat from the bulb to dry the surface.
  • l을 확인하세요amp is placed in a dry area and away from sources of moisture.
  • Place a protective mat or coaster underneath the lamp to protect surfaces.
• Dimmer Switch Not Working:
  • l을 확인하세요amp 전원이 켜져있습니다.
  • Gently rotate the dimmer knob back and forth to see if it responds.
  • If the issue persists, the dimmer switch or cord may need replacement. Contact customer support.

Contact information for support if you are experiencing issues with your lamp.

제품 사양

l의 시각적 표현amp's approximate dimensions.

보증 정보

WBM LLC warrants its products to be free from defects in material and workmanship for 30 days from the shipment date unless otherwise noted. WBM LLC will replace any item returned to us within the parameters of this policy and found to be defective. All returned warranty-issue merchandise must be properly packed for a safe return shipment and in original purchase condition with the original packaging, the original receipt/invoice/packing slip, and an explanation of the item's problem. WBM LLC will not refund, credit, or cover shipping expenses for warranty item returns or warranty item replacements under any circumstances. WBM LLC is not liable for misuse of its products. This warranty does not cover damage due to abuse, neglect, alteration, failure to follow instructions, shipping damage, or damaged packaging. WBM LLC expressly disclaims all express warranties not stated herein and all implied warranties, including the implied warranties of merchantability and fitness for a particular purpose.

고객 지원

For any questions, concerns, or assistance with your Himalayan Glow Salt Lamp, please refer to the contact information provided on the product packaging or visit the official Himalayan Glow website. You may also find additional support resources and FAQs there.

Product packaging displaying the UPC barcode and quality control information.