SINGER Foot Controller and Power Cord Instruction Manual

1. 제품 오버view

This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.

1.1. 주요 특징

• Integrated foot controller and power cord.
• Genuine SINGER replacement part.

1.2. Compatible SINGER Sewing Machine Models

This foot controller and power cord is compatible with the following SINGER sewing machine models:

• 가수 1105
• 가수 1116
• 가수 1120
• 가수 1130
• 가수 118
• 가수 1525
• 가수 1725
• 가수 1748
• 가수 2639
• 가수 2662
• 가수 2712
• 가수 2722
• 가수 2732
• 가수 2718
• 가수 2724
• 가수 2730
• Singer 3116 Simple
• 가수 3709
• 가수 3722
• 가수 3810
• 가수 3820
• 가수 3825
• 가수 3962
• 가수 4102
• Singer 4205 Inspiration
• Singer 4206 Inspiration
• Singer 4210 Inspiration
• Singer 4212 Inspiration
• Singer 4220 Inspiration
• Singer 4228 Inspiration
• 가수 6510
• 가수 6550
• 가수 7312
• 가수 7322
• 가수 7350
• Singer 14T98DS

2. 설정 지침

Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.

2.1. Connecting the Foot Controller to the Sewing Machine

1. Identify the Connector Port: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
2. 커넥터를 정렬하세요: Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
3. 커넥터를 삽입하세요: 커넥터가 포트에 완전히 고정될 때까지 부드럽게 밀어 넣으십시오. 억지로 연결하지 마십시오.

Image: Three-pin connector for the sewing machine input.

Image: Connector dimensions for proper fit.

2.2. Connecting to Power Outlet

1. Ensure Machine is Off: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
2. 콘센트에 꽂으세요: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).

Image: Power plug with voltag사양

Image: Complete foot controller and power cord assembly.

Image: SINGER Foot Controller and Power Cord.

3. 사용 설명서

Once the foot controller is properly connected, you can begin operating your sewing machine.

3.1. Controlling Sewing Speed

1. 기계 켜기: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
2. 압력을 가하세요: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
3. 속도 증가: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
4. Stop Sewing: Release pressure from the pedal to stop the machine.

4. 관리 및 유지 보수

Proper care ensures the longevity and reliable performance of your foot controller.

• 청소: Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
• 저장: When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
• 점검: Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.

5. 문제 해결

If you encounter issues with your foot controller, refer to the following common problems and solutions.

5.1. Sewing Machine Does Not Power On

• 연결 확인: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
• 전원 확인: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
• Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.

5.2. No Speed Control or Machine Runs at Full Speed

• Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
• 내부 문제: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.

5.3. Intermittent Power or Operation

• 코드 손상: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
• 느슨한 연결: Re-seat all connections, ensuring they are firm and secure.

6. 제품 사양

7. 보증 및 지원

For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER web대지.

You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.