소개
This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Intex 10-Feet x 30-Inch Easy Set Pool. Please read all instructions carefully before assembly and use. Retain this manual for future reference.
중요한 안전 정보
- 어린이를 수영장 안이나 근처에 혼자 두지 마십시오.
- 언제나 성인의 감독이 필요합니다.
- 수영장에 뛰어들거나 뛰어들지 마세요.
- Ensure the pool is set up on firm, level ground.
- Follow all local regulations regarding pool safety and fencing.
설치 지침
Proper site preparation and assembly are crucial for the longevity and safety of your Easy Set Pool. Follow these steps carefully.
1. 현장준비
Select a firm, level area in your backyard. Remove any sharp objects, debris, or uneven surfaces. The area should be slightly larger than the pool's diameter (10 feet).
Image: A prepared ground area with a blue tarp and grey yoga mats laid out, indicating a level and cushioned base for the pool.
It is recommended to place a ground cloth or tarp (not included) under the pool for added protection against punctures and to provide a slightly softer base. Some users also place foam mats or old yoga mats for extra cushioning.
2. Unpacking and Spreading the Pool Liner
Carefully unpack the pool from its box. Allow the pool liner to warm up in the sun for easier unfolding and to reduce wrinkles. Spread the pool liner evenly on the prepared, level ground.
Image: The blue and white checkered pool liner is spread out on a grassy area, ready for inflation and filling.
3. 상단 링에 공기 주입하기
Locate the inflation valve on the top ring of the pool. Use an air pump (electric pump recommended for efficiency) to inflate the top ring until it is firm but not over-inflated. Ensure the valve is securely closed after inflation.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
4. Filling the Pool with Water
Begin filling the pool with water using a garden hose. As the water level rises, the pool walls will naturally rise and take shape. Smooth out any wrinkles on the bottom of the pool as it fills. Stop filling when the water reaches the indicated fill line, typically just below the inflated top ring.
Image: An Intex Easy Set Pool filled with water, with children enjoying themselves, demonstrating the pool's capacity and recreational use.
5. 필터 펌프 연결
Connect the included filter pump to the designated inlet and outlet fittings on the pool liner. Ensure all connections are secure to prevent leaks. Refer to the separate filter pump manual for detailed assembly and operation instructions for the pump.
Image: A close-up of the Intex Easy Set Pool showing the filter pump connected to the pool's side, with hoses running to and from the pump.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
수영장 운영
Once set up, your Intex Easy Set Pool is ready for use. Follow these guidelines for optimal enjoyment.
수위
Maintain the water level between the upper and lower fill lines. Overfilling can strain the pool structure, while underfilling can affect pump performance.
필터 펌프 작동
Operate the filter pump daily to ensure proper water circulation and filtration. The recommended run time is typically 2-4 hours per day, depending on usage and water clarity. Consult the pump manual for specific timer settings.
유지
Regular maintenance is essential to keep your pool water clean and safe.
물화학
Test your pool water regularly using a pool test kit. Adjust pH, alkalinity, and sanitizer levels (e.g., chlorine) as needed to maintain proper balance. Follow the chemical manufacturer's instructions for dosage.
수영장 청소
- 스키밍: 수영장 스키머 그물을 사용하여 매일 물 표면에서 나뭇잎, 곤충 및 기타 잔해물을 제거하세요.
- 진공 청소: Periodically vacuum the bottom of the pool to remove settled debris. A garden hose with suction can be used for this purpose.
- 라이너 세척: Gently wipe down the pool liner with a soft brush or cloth to prevent algae buildup.
Filter Cartridge Care
The filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, or as needed, depending on pool usage and water conditions. A dirty filter cartridge reduces pump efficiency.
문제 해결
일반적으로 발생할 수 있는 문제에 대한 해결책은 다음과 같습니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 흐린 물 | Poor filtration, chemical imbalance, high debris load. | Run pump longer, clean/replace filter, adjust water chemistry, shock treat pool. |
| 조류 성장 | Low sanitizer levels, poor circulation. | Shock treat with algaecide, brush pool walls, ensure proper filtration. |
| Leaking Pool | Puncture in liner, loose hose connections. | Locate and patch hole with repair kit, tighten all hose clamps. |
| 펌프가 작동하지 않음 | Power issue, clogged filter, air in system. | Check power supply, clean filter, bleed air from pump. |
명세서
- 상표: 인텍스
- 모델: 56921EG
- Approximate Set-up Size: 10 ft x 30 in (305cm x 76cm)
- 물 용량(80%): 1,018갤런(3,853리터)
- 재료: 폴리염화비닐(PVC)
- 포함된 구성 요소: Filter Pump (530 gallon/hour flow rate)
- 필요한 조립: No (Easy Set-up)
- 실내/실외 사용: 집 밖의
- 품목 무게: 24.6 파운드
보증 및 지원
For warranty information, product registration, or technical support, please refer to the documentation included with your product or visit the official Intex web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
연락처 정보: Refer to your product packaging or the Intex web최신 고객 서비스 연락처 정보는 사이트에서 확인하세요.
