엔지니어 SL-71 LED 손전등 돋보기 사용 설명서

1. 서론

The Engineer SL-71 is a lightweight, LED-illuminated inspection magnifier designed for detailed examination. It features 10x magnification, a scratch-resistant twin lens construction, and an integrated square scale for precise measurements. This manual provides essential information for the proper setup, operation, and maintenance of your SL-71 magnifier.

The Engineer SL-71 LED Flashlight Magnifier, featuring a white magnifier head with a black lens ring, attached to a black cylindrical handle with a white power switch. The handle also displays battery installation instructions.

2. 제품 오버view

The SL-71 magnifier is engineered for clarity and durability, making it suitable for various inspection tasks, including printed circuit board (PCB) work. Its design ensures a fixed focal point, focusing directly on the object held against its faceplate.

주요 특징:

• 10배 확대: Provides clear, enlarged views for intricate details.
• LED 조명: Integrated LED light source ensures bright, consistent lighting of the inspection area.
• Scratch-Resistant Twin Lens: Durable lens construction designed for longevity and clear vision.
• Integrated Square Scale: An internal 20mm precisely graduated scale allows for accurate measurements.
• 배터리 작동: Uses 2 x C type batteries for portable operation.

3. 설정

배터리 설치:

1. Locate the battery compartment on the handle of the magnifier.
2. Gently pull the end cap of the handle straight off.
3. Turn the bulb holder to the left and pull it out to access the battery slots.
4. Insert two (2) C-type batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
5. Reinsert the bulb holder, turning it to the right to secure.
6. Replace the end cap by pushing it straight back onto the handle until it clicks into place.

The handle section of the Engineer SL-71 magnifier, featuring printed instructions for battery installation, indicating how to open the compartment and insert C-type batteries.

4. 사용 설명서

돋보기 사용:

1. 전원 켜기/끄기: Locate the white slide switch on the side of the handle. Slide it forward to turn on the LED illumination and backward to turn it off.
2. 위치: Place the magnifier's lens directly over the object you wish to inspect. The fixed focal point ensures the object is in focus when held against the faceplate.
3. 점검: 접안렌즈를 통해 보세요 view the magnified object. The LED light will illuminate the area for enhanced clarity.

The Engineer SL-71 magnifier positioned over a green circuit board, demonstrating its use for detailed inspection of electronic components.

Using the Integrated Scale:

The SL-71 includes an internal graduated scale for measuring small components or features. This scale is visible through the eyepiece when the magnifier is in use.

• Align the object to be measured with the markings on the scale visible within the lens.
• The scale provides measurements in millimeters (0.5mm increments) and inches (1/32 inch increments).

클로즈업 view through the Engineer SL-71 magnifier, clearly showing the integrated 1/32 inch scale superimposed on a microchip on a circuit board, used for precise measurements.

A diagram illustrating the integrated graduated scale as seen through the magnifier, showing markings for 0.5mm and 1/32 inch measurements.

5. 유지관리

렌즈 청소:

To maintain optimal clarity, keep the lens clean. Use a soft, lint-free cloth specifically designed for optical lenses. Avoid abrasive materials or harsh chemicals, which can damage the lens coating.

배터리 교체:

When the LED illumination dims or fails to turn on, it is time to replace the batteries. Follow the battery installation steps outlined in Section 3.

저장:

Store the magnifier in a clean, dry place away from direct sunlight and extreme temperatures. While the lens is scratch-resistant, proper storage helps prevent dust accumulation and potential damage.

6. 문제 해결

• LED가 켜지지 않음:
  • 배터리가 극성에 맞게 올바르게 삽입되었는지 확인하세요.
  • Replace the batteries with fresh C-type batteries.
  • Ensure the power switch is fully engaged in the 'on' position.
• 이미지가 흐릿하거나 불분명합니다:
  • Ensure the magnifier's faceplate is placed directly on the object being inspected. The focal point is fixed.
  • Clean the lens surface using a soft, lint-free cloth.

7. 사양

8. 보증 및 지원

Warranty information for the Engineer SL-71 LED Flashlight Magnifier is typically provided at the time of purchase or included with the product packaging. For specific warranty details, claims, or technical support, please refer to the documentation accompanying your product or contact the manufacturer directly through their official web대지.