소개
This document provides essential instructions for the proper installation, operation, maintenance, and troubleshooting of the De'Longhi 5332234800 Milk Intake Tube. This tube is an authorized OEM replacement part designed for use with various De'Longhi espresso machine models featuring a milk frothing system with a lid.
Ensuring the correct part is used and properly installed is crucial for the optimal performance of your appliance's milk frother. Please read these instructions carefully before proceeding.
설정 및 설치
The milk intake tube is a critical component for drawing milk from the container into the frothing mechanism. Proper installation ensures efficient milk delivery and frothing.
- 호환성 확인: Before installation, confirm that the De'Longhi 5332234800 tube is the correct replacement part for your specific De'Longhi espresso machine model. Refer to your appliance's original manual or the manufacturer's specifications.
- 오래된 튜브를 제거합니다(해당되는 경우): If replacing an existing tube, gently pull the old tube out from its connection point on the milk frother lid. Dispose of the old tube responsibly.
- 새로운 튜브 삽입: Carefully insert one end of the new milk intake tube into the designated opening on the underside of the milk frother lid. Ensure it is securely seated and forms a tight seal.
- Position in Milk Container: When the milk frother lid is placed on the milk container, the free end of the tube should extend sufficiently into the milk to draw it effectively. Ensure the tube reaches near the bottom of the milk container without touching it, allowing for maximum milk intake.
- 장애물 확인: Ensure the tube is not bent, kinked, or obstructed in any way that could impede milk flow.
Image: The De'Longhi 5332234800 Milk Intake Tube, shown with approximate dimensions of 0.4 inches (1 cm) in diameter. This image illustrates the typical appearance and size reference of the replacement tube.
Operating the Milk Intake Tube
The milk intake tube functions automatically as part of your espresso machine's milk frothing system. Once correctly installed, it draws milk from the container into the frother when the frothing function is activated.
- 우유 용기 채우기: Ensure the milk container is filled with fresh, cold milk to the appropriate level as indicated by your espresso machine's instructions.
- 뚜껑 부착: Securely attach the milk frother lid, ensuring the intake tube is submerged in the milk.
- Activate Frothing: Operate your espresso machine's milk frothing function according to its specific user manual. The tube will facilitate the flow of milk for frothing.
유지관리 및 청소
Regular cleaning of the milk intake tube is essential to prevent milk residue buildup, which can affect frothing performance and hygiene. This tube is 식기 세척기 사용 불가.
- 매일 청소: After each use, remove the milk intake tube from the lid. Rinse it thoroughly under warm running water to remove all milk residue.
- 딥 클리닝 : Periodically, or if blockages occur, soak the tube in warm, soapy water for several minutes. Use a small brush (like a pipe cleaner or a specialized cleaning brush for coffee machine parts) to clean the inside of the tube.
- 헹구고 말리세요: Rinse the tube again with clean water to remove any soap residue. Allow it to air dry completely before reattaching or storing.
- 손상 여부 검사: Regularly inspect the tube for any signs of wear, cracks, or damage. A damaged tube may not function correctly and should be replaced.
문제 해결
If you experience issues with your milk frother after installing the new intake tube, consider the following:
- Poor or No Frothing:
- Ensure the tube is clean and free of blockages.
- Verify the tube is securely attached to the frother lid and fully submerged in milk.
- Check that the milk container has sufficient milk.
- Confirm the tube's length is appropriate for your milk container. If it's too short, it won't reach the milk; if too long, it might bend or block. Some users have reported needing to trim the tube slightly for a perfect fit in certain models.
- Tube Does Not Fit Securely:
- Double-check that this is the correct OEM part number (5332234800) for your specific De'Longhi model.
- Ensure the connection point on the frother lid is clean and free of debris.
- Milk Leaks Around Tube Connection:
- Ensure the tube is fully inserted and seated correctly into the frother lid.
- Inspect the tube and the lid's connection point for any damage or wear that might prevent a tight seal.
명세서
| 부품 번호: | 5332234800 |
| 상표: | 델론기 |
| 유형: | Milk Intake Tube (Appliance Replacement Part) |
| 호환성: | Various De'Longhi Espresso Machine Models |
| 식기 세척기 사용 가능: | 아니요 |
| 대략적인 치수 : | 7 x 4 x 1 inches (packaging), 0.4 inches / 1 cm diameter (tube) |
| 품목 무게: | 0.32 온스(9.07g) |
보증 및 지원
As an authorized OEM replacement part, the De'Longhi 5332234800 Milk Intake Tube is designed to meet the quality standards of De'Longhi. Specific warranty terms for individual replacement parts may vary.
For detailed warranty information or technical support regarding your De'Longhi appliance or this replacement part, please refer to your original appliance's user manual or contact De'Longhi customer service directly. You can typically find contact information on the official De'Longhi website or within your appliance's documentation.
When contacting support, please have your espresso machine's model number and the part number (5332234800) readily available.
