1. 서론
Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.
Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.
2. 안전 정보
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- 설치 또는 유지 보수 작업을 시작하기 전에 항상 주 회로 차단기 또는 퓨즈 박스에서 전원을 차단하십시오.
- 이 조명기구를 접지되지 않은 전기 시스템에 연결하지 마십시오.
- 최대 와트를 초과하지 마십시오tage specified for the bulbs (2 x 100-Watt medium base bulbs).
- 파손을 방지하기 위해 유리 부품을 조심스럽게 다루십시오.
- 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
3. 패키지 내용
Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.
- Fixture Body with Brushed Nickel Finish
- Square Etched Glass Shade
- Mounting Hardware (Crossbar, Screws, Wire Nuts)
- Chain (for hanging installation option)
- Ceiling Mount Canopy (for semi-flush installation option)
- 사용 설명서
4. 설정 및 설치
This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.
4.1. 사전 설치
- 회로 차단기에서 전원을 끄세요.
- Remove existing fixture (if applicable).
- Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).
4.2. Semi-Flush Mount Installation
- Attach the mounting crossbar to the outlet box using the provided screws.
- Connect the fixture's ground wire to the supply ground wire using a wire nut.
- Connect the fixture's white wire to the supply white (neutral) wire.
- Connect the fixture's black wire to the supply black (hot) wire.
- 모든 전선을 콘센트 상자에 조심스럽게 집어넣습니다.
- Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
- Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).
그림 4.1: 자세한 view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.
4.3. Hanging Fixture Installation (with Chain)
- Follow steps 1-5 from the Semi-Flush Mount Installation.
- Determine the desired hanging length and adjust the chain accordingly.
- Thread the fixture's electrical wires through the chain and the canopy.
- Secure the chain to the mounting loop on the crossbar and to the fixture body.
- Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
- Attach the etched glass shade to the fixture body.
Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.
그림 4.3: 클로즈업 view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.
5. 사용 설명서
Once the fixture is securely installed and wired, you can begin operation.
- 전구 설치: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
- 복원력 : 주회로 차단기의 전원을 다시 켜세요.
- 빛 활성화: Use the wall switch connected to the fixture to turn the light on and off.
The etched glass shade provides a softly diffused light, ideal for various indoor settings.
6. 유지관리
정기적인 유지 관리는 조명 기구의 외관과 기능을 보존하는 데 도움이 됩니다.
- 청소: To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp 천을 사용한 후 마른 천으로 닦아낼 수 있습니다.
- 전구 교체: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
- 점검: 배선과 연결 부위에 마모나 손상 흔적이 있는지 정기적으로 점검하십시오. 문제가 발견되면 자격을 갖춘 전기 기술자에게 문의하십시오.
7. 문제 해결
조명기구가 제대로 작동하지 않는 경우, 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 불이 켜지지 않습니다 | 고정할 전원이 없음 | 회로 차단기나 퓨즈를 확인하세요. 벽 스위치가 켜져 있는지 확인하세요. |
| 불이 켜지지 않습니다 | 느슨한 전선 연결 | Turn off power, check all wire connections. Secure them firmly. |
| 불이 켜지지 않습니다 | 결함이 있는 전구 | Replace bulb with a new one of the correct type and wattage. |
| 깜빡거리는 빛 | 전구나 배선이 느슨함 | Turn off power, tighten bulb. Check wire connections. |
| 윙윙거리는 소리 | 호환되지 않는 디머 스위치 | 조광 스위치가 백열전구와 호환되는지 확인하십시오. |
If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.
8. 사양
Detailed technical specifications for the P3597-09 fixture:
| 기인하다 | 값 |
|---|---|
| 모델 번호 | P3597-09 |
| 치수(너비 x 높이) | 12-3/4 inches (32.38 cm) x 13-5/8 inches (34.61 cm) |
| 제품 치수(전체) | 33.02 x 33.02 x 35.56cm |
| 품목 무게 | 2.72kg(6파운드) |
| 재료 | Glass, Metal (Brushed Nickel Finish) |
| 전구 유형 | Incandescent (Medium Base / E26) |
| 전구의 수 | 2 |
| 최대 와트tag전구당 e | 100 와트 |
| 권tage | 120 볼트 |
| 설치 방법 | Semi Flush Mount / Hanging (Chain Included) |
| 스타일 | Mission / Craftsman |
| 색상 | 브러시드 니켈 |
Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.
9. 보증 및 지원
Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting web대지.
제조업체: 진행 조명
사업장 위치: GREENVILLE, SC, 29607 US
